Shenzhen Futu Innovation Technology FT02 Smart Watch User Manual
- June 6, 2024
- Shenzhen Futu Innovation Technology
Table of Contents
Shenzhen Futu Innovation Technology FT02 Smart Watch User Manual
Overview
- Screen
- Button
- Charging POGO PIN
- Temperature sensor
- Heart rate
- Strap
- Buckle
Charging:
- Make sure the POGO-pins on the charging cable fit correctly onto the charging terminals on the back of smart watch.
- Plug the USB terminals to a power source and after successful charging, a charging icon will appear on the screen
Install the “IoT Watch” application on your phone
Search and install the “IoT Watch” application from Google Play or App Store.
Or scan the QR code below to install the application directly.
- Connect the smart watch with the phone
- Turn on Bluetooth on the smartphone.
- Open the “IoT Watch” application on your smartphone, and then click the “+” in the upper right corner, then select automatic discovery, when the bracelet is closing to the phone, and a reminder that the device is found pops up, click to add, and after jumping to the page, click “+” After that, click Finish. After successfully connected, it will automatically enter the fitness tracker module page
- Unbind the smart watch with the phone
- Open the “IoT Watch” app on your smartphone.
- In the “My Home” menu, touch the “fitness tracker” and hold for few second, then “Remove Device”, and click Finish
Functions
Dial Style
There are 4 watch faces. dial styles. On the current dial, press the screen and slide to select your favorite.
Pedometer
The watch will automatically record your daily activities. Click on the touch screen to view more detailed data.
Heart rate
Press the icon to enter the heart rate, and the watch will automatically monitor your heart rate, swipe to right to exit.
Sport
Press the function “Sport” to enter the multi-sport mode. fitness tracker have 14 sports modes: walking, running, run indoor, Hiking, cycling, swimming, football, basketball, volleyball, badminton, table tennis, baseball, skipping and yoga. Choose one of them and do some exercises. Fitness tracker will record your sport data. After completing the exercise, slide right to stop the exercise and save the exercise data. If you have connected your Fitness tracker to the “APP” via Bluetooth, you can also view your sports data in the application.
Sports details:
When you want to pause the exercise, slide the screen left or right to pause,
or you can end the current exercise.
Note: If it takes too little time to practice, the data will not be saved.
Sleep Monitor
Click the interface, the watch will display the sleep data of the week.
When stop sleeping, the watch will show the report of your sleep and the time of total sleep, light sleep and deep sleep. After sync with APP, you can check for more detailed report.
**Message
**
Unread messages will be displayed in the Message icon. Slide the screen to enter and check the information on the watch.
Weather
After connecting to “APP” and opening the location permission, the weather will be automatically pushed to the watch.
Temperature
Click on the watch body temperature detection function, put the watch on your hand for body temperature detection, and wait for 30 seconds to get the body temperature result
Alarm
Click in the “Alarm” interface, and you will see the pre-set alarms. When the reminder time is up, your watch will vibrate.
Stopwatch
Press the screen to find the stopwatch. Enter the timing page, touch the keys start and pause, and slide right to exit.
Sedentary reminder
Press the screen to turn on or off the sedentary reminder.
Remote capture
The device can be used as a remote control for the camera function on the mobile phone.
In “APP”, click the “photograph” button, your watch will display a camera icon, press shortly to capture your photo.
**BT music
**
Tap the music function icon to enter the music playback control interface.
You can select the previous/next song, and play/pause the song. To exit music playback control, slide the screen from left to right.
Settings
In the “Settings” interface, click the screen slide to view more functions, including dial Switch, Language, Reset, Shut Down, System, Temperature Settings, Find phone, Brightness, Display off.
Dial switch
Touch “Dial Switch” on the screen to select other dials.
Language
Choose “Language” function on the “Settings”, and you can choose to switch the watch to another language.
Reset
Reset to factory default
Attention: if a factory reset is performed, all user data will be erased and the smart watch will be turned off.
Shut Down
Touching “Shut Down” on the screen will turn off the watch.
**System
**
Click “System” to check the watch BT name, detailed information about firmware version.
**Find Phone
**
After connecting to the application, click the find phone icon in the “Settings” interface and you phone will ring/vibrate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>