MEGATEK T8-2-Pack Dual Waterproof Portable Bluetooth Speakers User Manual
- October 30, 2023
- MegaTek
Table of Contents
MEGATEK T8-2-Pack Dual Waterproof Portable Bluetooth
Speakers
Wireless Speaker – T8 User Manual
To assure the product to Work in best status please read the user’s manual carefully before operation and keep it well for future use
Welcome
Congratulations on your purchase of a high-quality Megatek product. Your T8 is designed for reliable and trouble-free performance, we wish you great satisfaction in using it.
SAFETY INFORMATION
- Keep the products and all its parts out of reach of smallchildren.
- Do not use the speakers under the water.
- Do not disassemble, repair, or modify the speakers.
- To avoid possible hearing damage, do not listen to these Bluetooth speakers at high volume levels for long periods of time. Always keep the volume within reasonable limits.
- Use DC 5V charger only.
- Do not leave them in low temperatures as moisture can form inside the products, which may damage the circuit boards.
- Do not cover or insert anything into the holes in the speakers.
- Do not leave them in high temperatures as electronic devices and plastic parts may warp in heat.
- Disassembling the speakers voids their warranty.
PRODUCT FEATURES
- T8 Wireless Speaker x 1 (single-pack) / 2 (2-Pack)
- Micro USB charging cable x 1
- User Manual x 1
GETTING TO KNOW YOUR T8 SPEAKER
- Mic: Microphone for hands-free calling
- Power button (on/off/play/pause)
- Bluetooth/Power indicator
- LED light on/off button
- USB Charging Port
CHARGING YOUR T8 SPEAKER
The T8 speaker beeps when the battery is low. Charge it fully before first- time use.
- Connect the micro USB end of the charging cable (supplied) to the USB socket of the speaker. Plug the standard end into a computer or other USB charging device.
- The Power indicator will light Red, to indicate that the battery is charging. When the battery is fully charged the Power indicators will turn off.
- When fully charged, unplug the micro USB charging cable.
USING YOUR T8 SPEAKER
Power on/off
Press and hold Power button for 2 seconds, and your speaker will turn on in
Bluetooth mode, the Bluetooth indicator will flash blue and a tone will sound.
Press and hold Power button for 2 seconds again, and your speaker will turn
off.
Note : If the Bluetooth speaker doesn’t receive an audio signal for approximately 10 minutes it will turn off. Press and hold the button to turn the products back on again.
Listening to Music/Audio using Bluetooth
Turn on T8 speaker, and the Bluetooth indicator will flash blue whilst it searches for Bluetooth devices.
-
1. On the device that you would like to connect to your Bluetooth speaker via Bluetooth, turn on Bluetooth connectivity and ensure that it is “discoverable”.
2. Select to “Add new device”, if necessary.
Note: Some products will automatically search for a new device and so the ”Add new device“ option is not available. -
3. When found, your Bluetooth speaker will be displayed as “Megatek T8”. Select the device name to begin pairing.
Note: If your device requests a password, please enter “0000” to complete the device pairing. -
4. When pairing is completed the Bluetooth indicator will light solid blue, and a tone will sound. Now that you have paired your device with the Bluetooth speaker, it will connect to it next time when it is within range, which is about 10 meters or less (33 feet or less), line of sight. Your device will remain paired with the Bluetooth speaker unless you decide to disconnect or “unpair” it.
Note: If you disconnect the T8 speaker on your Bluetooth device, it will not connect to it even if it is within the operation range, unless you connect to it on your Bluetooth device again. -
5. Select and start the music or audio that you wish to listen to on your paired Bluetooth device, it will now be heard through the Bluetooth speakers.
6. Adjust the volume, skip to previous/next track, or play/pause on the connected device. You can also play/pause by pressing Power button on the speaker.
Using as a Mobile handsfree speakerphone
If your mobile phone supports the Hands-Free Profile (HFP) or Headset
Profile (HSP) you can pair it with your Bluetooth speaker and use it as a
handsfree speaker when it is in Bluetooth mode.
- Answering a call: Press the Power button to answer an incoming call.
- Rejecting a call: Double-Press the Power button to reject an incoming call.
- Disconnect a call: Press the Power button to end the call.
- Redial last call: Double-Press the Power button to call the last dialed number.
Note: If you were listening to music when you receive or make a call, the music will be paused whilst the call is in progress and will resume once the call ends.
Pairing for True Wireless Stereo (TWS)
Your T8 speaker supports paring with a secondary one for true wireless stereo
(TWS). For single-pack, a secondary T8 speaker needs to be purchased
separately. Turn on both T8 speakers, press LED Light button on the one
connected to your Bluetooth device, or either one if neither is connected, and
hold it for 5 seconds, and wait for approximately 10 seconds for TWS pairing.
Whenthe paring is complete a tone will sound. Once paired for TWS, they will
pair with each other automatically when both are turned on next time.
For 2-pack, just turn on both the supplied T8 speakers, and they will
automatically pair with each other for TWS, when the paring is complete a tone
will sound. When two T8 speakers are paired for TWS, press and hold LED light
button on either one for 5 seconds to disconnect them.
Note: If two speakers are paired with each other for True Wireless Stereo (TWS), turning off either speaker will turn off the other.
Turning on/off LED Lights
Press LED Light button to turn on/off the LED lights.
TROUBLESHOOTING
Unable to pair with a Bluetooth device:
-
Check that you are in Bluetooth mode.
-
Ensure that you are within range of the Bluetooth speaker for Bluetooth functionality, 10 meters or less (33 feet or less).
-
Move the Bluetooth speaker and Bluetooth device away from other Bluetooth devices/electrical equipment.
-
If possible, turn off other nearby Bluetooth devices or disable their Bluetooth functionality.
No sound / Sound distortion: -
Adjust the volume.
-
If you are using a Bluetooth connected device, check the volume on the secondary device and on your Bluetooth speaker.
-
Your Bluetooth speaker may need to be recharged.
12 MONTH WARRANTY
Dear valued Customer, Thank you for choosing MEGATEK !
-
If you are not satisfied with our product and need to return, please kindly process it through Amazon system or write to us for assistance, if needed. You can return items within 30 days of receipt of shipment. If the product seems defective, please CONTACT US and we will try our best to provide satisfying service.
-
Warranty time: You get 12 months!
Having problems with this product?
You have 3 choices: -
Contact us through the Amazon Buyer-Seller Messages and we will provide support within 24 hours.
-
You can also email us directly with your order ID and description of problems at: [email protected]
-
Just call us at : +86 579-8275-5605
(Our working time: Mon.to Fri. GMT +8:00 China, except weekends and national holidays).
Attention: natural disasters, incorrect use, unauthorized repairs damages are not in warranty. -
In MEGATEK, we strive to bring more satisfactory products to our valued customers and make them have a great experience,not only for pre-sale but also for after-sale service, as we have a whole team of customer service stand behind our products.Our extensive customer service team will solve your product issues with satisfied solutions, answer any questions, and effectively process return & replacement.
If you are satisfied with our products and service, please rate us with 5
stars review and feedback! Your support means a lot to us and will help us
bring more good products in return to you. Get support at:
http://www.megatekelec.com
After-sale Contact information:
E-mail: [email protected]
Phone: +86 579 8275-5605
Website: www.megatekelec.com