V-TAC VT-48501 LED Flood Light Instruction Manual

: September 11, 2024
: V TAC

Table of Contents

V-TAC VT-48501 LED Flood Light
Product Usage Instructions
FAQ
TECHNICAL DATA
INTRODUCTION & WARRANTY
INSTALLATION DIAGRAM
DISASSEMBLY DIAGRAM
Documents / Resources

V-TAC VT-48501 LED Flood Light

Product Usage Instructions

Introduction & Warranty

This LED Flood Light comes with a multi-language manual accessible via QR code. Please scan the QR code to access the manual in multiple languages. Ensure compliance with the installation instructions to maintain warranty validity.

Installation

Loosen the screws to remove the bracket.
Determine the installation location.
Punch holes on building surfaces with drills.
Insert wall plugs.
Fix the bracket securely.
Install the lamp body and lock the bracket screws.
Connect the input line: L live wire in brown, N zero wire in blue, and yellow-green wire to the ground wire.
- Insulate and waterproof the connections using insulation tape and waterproof tape. Consider using a professional waterproof junction box for added safety.

Disassembly

Note: Light source removal will void the warranty. Disassembly should only be done by qualified personnel for maintenance purposes.

FAQ

Q: How can I dispose of the product?

A: This product should not be disposed of with other household wastes. Please refer to local regulations for proper disposal methods.

Q: What should I do in case of an issue with the product?

A: For any queries or issues with the product, please contact us at SUPPORT@V-TAC.EU. For inquiries regarding our product range, please reach out to our distributor or nearest dealers.

Q: What are the recommended safety precautions during installation?

A: To reduce risks, ensure that flexible wiring is securely fixed to avoid strangulation hazards. Use caution to prevent electric shocks and follow proper insulation and waterproofing procedures during installation.

TECHNICAL DATA

MODEL VT-48501
SKU 23616, 23617
LUMENS 67500 Lm
WATTS 500W
INPUT VOLTAGE AC: 220-240V, 50Hz
BEAM ANGLE Sphere 360°
LIFE SPAN 25,000 Hours
ON/OFF CYCLE >15,000
DF >0.9
CRI >70
MATERIAL Diecast Aluminium
OPERATION TEMPERATURE -20°C to +45°C
DIMENSION 530x65x523mm
This product contains a light source of energy efficiency class, which shall be replaced by the energy class of the contained light source

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at your best.
The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear.
The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.
The products are suitable for 10-12 Hours Daily operation.
Usage of product for 24 Hours a day would void the warranty.
This product is warranted for manufacturing defects only.

WARNING

Please make sure to turn off the power before starting the installation.
Installation must be performed by a qualified electrician.
The light source contained in this luminaire shall only be replaced by the manufacturer his service agent or a similar qualified person.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
Replace any cracked protective shield.
The minimum distance from lighted objects is 1m.
Terminal block not included.
Proper grounding should be ensured throughout the installation.
For Outdoor use.
NOTE: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.
This marking indicates that this product should not be disposed of with other household wastes
Caution, risk of electric shock.

INSTALLATION DIAGRAM

Loosen the screws to remove the bracket.
Determine installation location.
Punching holes on building surfaces with drills.
Insert Wall plug.
Fixed bracket.
Install the lamp body and lock the bracket screws.
Adjust the angle of the entire lamp, with an adjustable angle of 0-180 °and a grid adjustment of 22.5 °. After adjusting the angle, tighten the angle adjustment screw and bracket fixing bolt.
Adjust the angle of the single lamp, with an adjustable angle of -60 ° to+60 °, and a single grid adjustment of 30 °. After adjusting the angle, lock the angle adjustment screw and bracket fixing bolt.
The input line is connected to the “L” live wire in brown, the “N” zero wire in blue, and the yellow-green wire is connected to the ground wire. After connecting the wires, it is necessary to use insulation tape and waterproof tape for insulation and waterprooﬁng treatment. It is recommended to use a professional waterproof junction box.

DISASSEMBLY DIAGRAM

(For Market surveillance team only)

Note: Light source removal will void the warranty

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGES, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.