milla KT79 Smart Watch User Manual
- September 10, 2024
- milla
Table of Contents
milla KT79 Smart Watch
Charging and Activation
Before using the watch for the first time, please ensure it is fully charged. If the charging icon does not appear, please keep charging for 10 minutes.
- Use the included magnetic charging cable to attach it to the metal contact points on the back of the watch, then charge it.
- This product does not come with a power adapter. To ensure safety, you can use a computer USB interface or a power adapter with an output not exceeding 5V – 1A when charging. Please purchase a power adapter through legitimate channels and avoid using low-quality or counter teit adapters to prevent damage to the watch, explosions, or fires.
- Do not charge in a humid environment. Regularly clean the watch body with a dry cloth to ensure the cleanliness of the magnetic charging port and the magnetic charging cable for normal charging.
Buttons and Touch
- Long press button 1 to turn on/off the watch, short press to turn on the screen.
- On the watch dial interface, click button 1 to enter the menu, and press the button twice in quick succession to switch the menu styles.
- Long press button 2 to enter the sports list, short press to turn off the screen.
- When on the other interfaces, press the button to return.
Swipe Up: Message Notifications
Swipe Down: Control Center.
App Download and Connection
-
Download and install the ‘Da Fit’ app.
You can scan the QR code in this manual, scan the QR code on the watch, or directly search for ‘Da Fit’ in the app store to download. -
Connect the smart watch.
After turning on Wireless on your phone, enter the app (note: if you cannot open the app, please enable location services on your phone, then open the app) and click ‘Device’ > ‘Add Device’ -> Bind the corresponding device that appears in the search (look for the relevant item in ‘Settings’ -> ‘About’ to find the Wireless name and MAC address of the device on the watch) -> Click ‘Connect.’ -
Connect WirelessCalling/Audio Wireless.
In the initial state of the watch, Wireless calling is turned off by default, so calling and music functions are unavailable. Slide down to the ‘Control Center’ on the watch face, enter the ‘Settings’ menu, click the ‘Calling’ icon, and turn on calling and audio Wireless to enable these functions.
Features
On the main screen, press and hold for 2 seconds to enterthe watch face switching interface, swipe left and rightto switch watch faces, and clickto confirm. You can push ‘Custom’ watch faces through the app.
Displays the steps, distance, and calories recorded for the day. You can set step, distance, and calorie goals in the app.
Displays the sleep monitoring status for the day, with data updated daily. When connected to the app, data can be synchronized and the device will recalculate new data forthe day.
Enter the heart rate measurement interface, click to start the test after entering the page, and the bottom test light will light up to begin measurement. It takes about 60 seconds, and when it’s done, there will be a vibration reminder. If it says ‘Not wearing the watch,’ you need to wear the watch again.
Enter the blood pressure measurement interface, and the bottom test light will light up. It takes 30 to 60 seconds, and there will be a vibration reminder when the measurement is completed.
Enter the blood oxygen measurement interface, and the bottom test light will light up. It takes 30 to 60 seconds, and there will be a vibration reminder when the measurement is completed.
The watch can sync notifications from common social apps.
Note : You can enable/disable sync notifications in the app.
-
When the watch is connected to the app, the weather interface will display real-time weather and temperature, as well as weather conditions for the week:
-
100+ sports modes such as walking, running, cycling, skipping, basketball, etc. are included. Click the icon to start exercising. When connected to the app, you can view more detailed content.
-
After the watch is connected to the app, you can control the phone’s music player.
-
System presets common timer intervals. Click to quickly time. Click the
custom button to set the time. -
After the smartwatch is connected to the app, you can set single mode alarms or recurring alarms.
-
Click ‘Start’ once to start the timer, click ‘Pause’ once to pause the timer,, and ‘Reset’ to resetthe timer to zero.
-
When the device is connected to the app, click’ Find Phone,’ and the phone will ring to indicate a successful search. If the watch is not connected to the app, it will prompt that the phone is not connected.
-
You can enable ‘Reminders to Move’ in the app to remind you to take breaks every hour.
Control Center: Do Not Disturb Mode, Power Saving Mode, Brightness Adjustment, Flashlight, Electronic Business Card, Settings.
Waterproof
Waterproof: IPX8 (3AM)
Notes
- This app is not a medical device. Data obtained during the use of this app is for reference only, and should not be used for clinical diagnosis, medical research, diagnostic, or treatment purposes.
- To ensure long-term use of this product, it should not be used in hot water/sauna environments to prevent steam damage to the equipment.
Common Issues
- The watch cannot be turned on. Please press and hold the power button for more than 3 seconds or the battery may be low and needs charging.
- Wireless is not connected or cannot connect.
- Try restarting the watch and reconnecting-
- Try connecting again after restarting your phone’s Wireless.
- Do not connect your phone to other Wireless devices at the same time.
- When Wireless is disconnected, functions such as calls, message notifications, and health data syncing will not work.
- Manual heart rate/blood oxygen/blood pressure measurements are inaccurate.
- During general measurements, the sensor on the watch may not be in correct contact with the body.
- Pay attention to ensuring the sensor is in full contact with the wrist during measurement.
- Sleep data is not very accurate.
- Sleep monitoring simulates the user’s self-recognition of falling asleep and waking up times, it requires correct devicewearing.
- If you wear it too late or fall asleep too quickly, it may be inaccurate.
- Sleep monitoring defaults to nighttime monitoring from 10 PM to the next morningat 8 AM.
For more common issues, please refer to the App’s ‘My’ > ‘FAQ’ section.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.