DiSNEP Elvis Stitch LED Karaoke Microphone Instruction Manual

September 11, 2024
Disnep

DiSNEP Elvis Stitch LED Karaoke Microphone

DiSNEP-Elvis-Stitch-LED-Karaoke-Microphone-PRODUCT

Product Overview

DiSNEP-Elvis-Stitch-LED-Karaoke-Microphone-FIG-1

Package Contents

  • 1 (One) Elvis Stitch LED Karaoke Microphone
  • 3in. x 3.5in. x 10.5in. (7.5cm x 8.9cm x 26.7 cm)
  • 1 (One) USB Type-C Charging Cable 19.7in. (50cm)
  • 1 (One) Instruction Manual

Power On/Off

  • Power on
    • Press and hold the Power Button.
  • Power off
    • Press and hold the Power Button.
    • Note: Always power off the karaoke microphone when not in use.

Pair a Wireless Microphone Speaker with your mobile device

  1. Keep the distance between your wireless microphone speaker and mobile phone (or other devices) within 32.8 feet.
  2. Power on the wireless microphone speaker.
  3. Activate the Bluetooth function on your phone within range and select SP-1003-ELVIS-STITCH” from the list shown.
  4. You will hear a beep sound when pairing is successful.

Reconnect Wireless Microphone Speaker to your mobile device

  • When powered on, the wireless karaoke microphone will automatically connect with the last successfully paired device.

Technical Specification

  • Driver Diameter: 52 mm
  • Impedance: 4 Ohms
  • Playing Time: 2.5 – 3 Hours
  • Charging Time: 2 – 2.5 Hours
  • Power Supply: Li-lon Battery 3.7V 600 mAh
  • Bluetooth Range: 32.8 feet
  • Bluetooth Version: 5.3
  • USB-Type-C Charging Cable Included

How to use

Playing Music and Singing

  1. Switch on your microphone
  2. Connect the microphone to any audio device by Bluetooth to listen to music.
  3. Play your music track and adjust the volume with your audio device or speaker volume button

FM Radio

  1. Plug in the USB Type-C charging cable as an FM antenna.
  2. Short press the Power button to switch between Bluetooth Speaker and FM Radio.
  3. Short press the Play button to auto-scan FM channels.
  4. Long press the Prev or Next button to switch channels.
  5. Short press the Speaker Volume button to adjust the volume.

Charging Your Wireless Microphone Speaker

For your safety, please always use the appropriate 5V output charger/Adapter to charge the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.

  1. Use the USB Type-C charging cable provided with this Wireless Microphone Speaker.
  2. Connect the USB Type-C plug to the USB Type-C charging port on the microphone, then connect the USB plug to a USB port on a wall adapter to begin charging.
  3. The LED Indicator will turn red while charging and will turn off once fully charged.

NOTE:

  • You must select a qualified charger from a regular manufacturer.
  • You must charge the Wireless Microphone Speaker if it has been not used for more than 6 months.

USB Type-C Charging Cable rating 5V/1A Max

CAUTION: The USB Type-C charging cable included with this item is intended for use with this product. Only use the included USB Type-C charging cable to charge this product.

FAQ

If the wireless karaoke microphone cannot be paired with your device, please try the following:

  • Ensure that your microphone is in pairing mode or reconnection mode.
  • Ensure that the Bluetooth search function of your mobile device is activated.

If the wireless karaoke microphone cannot be recharged:

  • If you use a power outlet, ensure that the power supply is connected securely and the outlet works.

Safety instructions for the lithium battery and charging the product

  • The input voltage to the product is DC 5V 1A.
  • In order to charge the product in a safe manner and reliable conditions, please only adopt a certified appropriate charger/ adapter for charging the product.
  • Only charge the product at ambient temperatures between 10 °C/ 50 °F and 40 °C/ 104 °F.
  • Do not heat above 70 °C/158 °F, eg. Do not expose to sunlight or throw into fire.
  • Switch off the product after use.
  • Please note that we won’t take any responsibility for any wrong operation (eg. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
  • In extreme cases, abuse or misuse of Lithium battery packs can lead to explosion, heat generation, fire development, or smoke development.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation.

Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, this can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or experienced radio/ TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID: 2ADM5-SP-1003V3

  • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under license.
  • Other trademarks and trade names are those of their respective owners.
  • Keep All Relevant Information
  • For Future Reference
  • Made in China
  • ITEM# SP-1003-ELVIS-STITCH
  • ©Disney
  • www.disney.com

Documents / Resources

| DiSNEP Elvis Stitch LED Karaoke Microphone [pdf] Instruction Manual
SP-1003V3, 2ADM5-SP-1003V3, 2ADM5SP1003V3, Elvis Stitch LED Karaoke Microphone, Elvis Stitch, LED Karaoke Microphone, Karaoke Microphone, Microphone
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals