DiSNEP 1-855-428 Animated Holiday Mickey Disney Sold Installation Guide
- June 1, 2024
- Disnep
Table of Contents
DiSNEP 1-855-428 Animated Holiday Mickey Disney Sold
Product Specifications:
- Input: 100-240V 50/60Hz
- Output: 5.9V 2A
Product Usage Instructions
Assembly Instructions:
- Refer to the video assembly instructions available online for visual guidance.
- Identify and lay out all parts listed in the manual.
- Follow the step-by-step assembly process below:
Step-by-Step Assembly:
- Slide the Pants (E) onto the assembly with the tag at the back facing towards the back.
- Plug the adapter into the Function Control Box.
- Slide the back of the Tail (G) through the hole in the back of the Pants (E).
- Pull the Pants (E) up over the hip hoop available on the Body Frame (F).
- Attach the arms (I, J), head (K), neck (L), and hat (M) accordingly.
Operation Instructions:
- Plug the power adapter into a standard power outlet.
- Adjust settings on the Function Control Box located on the Body Frame (F).
Settings:
- Switch Mode 1: Activates sound and animation through Infra-red (IR) sensor activation within a range of up to 2m/6.5ft.
- Switch Mode 2: Activates item using a Step Here Try Me Activation Pad (Not Included).
Care and Storage Instructions:
- Operate indoors for best performance.
- Store in original packaging when not in use.
- Avoid exposure to heat and moisture.
Frequently Asked Questions
Q: Can children play with this item?
A: No, this item is not a toy and should be used for decoration only.
Q: What should I do if a part is missing or broken?
A: Do not attempt to assemble the product; contact SVI Customer Service or Home Depot Customer Service for assistance.
Q: How do I adjust the volume of sound?
A: Raise or lower the volume using the volume control turn dial on the Function Control Box.
Q: How should I store this product?
A: Store the product in its original packing away from heat and moisture when not in use.
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
23SV24033 Holiday Mickey
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND
CONTACT SVI CUSTOMER SERVICE FROM 8:30 AM TO 5:30 PM PST AT
1-855-428-3921, EMAIL
CUSTOMERSERVICE@SVIUS.COM, OR CALL HOME
DEPOT CUSTOMER SERVICE FROM MON-FRI 8:00 AM TO 7:00 PM AND SAT 9:00 AM TO 6:00
PM EST AT 1-877-527-0313.
IMPORTANT TIPS
- Ensure that the item’s adapter is plugged in at the function control box and in the wall.
- Ensure that the switch on the function control box is in the desired setting.
- If not functioning properly (Body doesn’t turn, head doesn’t move, right arm doesn’t lift up and down), ensure that cables are connected correctly, according to the instruction sheet.
- Be sure nothing is blocking movement or caught in moving parts.
- Ensure that the floor or surface that the item sits on is flat and level.
- Ensure that the volume is not down.
- If the item still does not work, contact SVI Customer Service from 8:30 am to 5:30 pm PST at 1-855-428-3921, email customerservice@svius.com, or call Home Depot Customer Service from Mon-Fri 8:00 am to 7:00 pm and Sat 9:00 am To 6:00 pm EST at 1-877-527-0313.
PARTS LIST
- A. Base x 1
- B. Poles x 2
- C. Shoes x 2
- D. Foam Tubes x 2
- E. Pants x 1
- F. Body Frame x 1
- G. Tail x 1
- H. Shirt x 1
- I. Left Arm x 1
- J. Right Arm x 1
- K. Head x 1
- L. Neck x 1
- M. Hat x 1
- N. Left Ear x 1
- O. Right Ear x 1
- P. Adapter x 1
- Input: 100-240V 50/60Hz
- Output: 5.9V 2A
Assembly Instruction
OPERATION INSTRUCTIONS
-
Plug the power adapter into a standard power outlet and adjust the settings on the Function Control Box, located on the (F) Body Frame, as desired.
-
Settings:
-
SENSOR
This switch mode will activate sound and animation when the infrared (IR) sensor is activated and will operate for 1 audio cycle with each activation. The infrared (IR) sensor has a range of up to 2 m/6.5 ft. and will activate when someone comes within an 80-degree angle from left to right, as well as from above and below. -
OFF· TRY ME
This switch mode allows the item to be activated only if triggered by using a Step Here Try Me Activation Pad (Not Included). The item will operate for one audio cycle with each Try Me activation. Otherwise, the item will stay off. -
Raise or lower the volume using the volume control turn dial, and turn it down to turn the volume off.
-
WARNING
This item is not a toy and should be used for decoration only. This item
contains small parts that can be a choking hazard. Keep all plastic and wire
parts away from children.
- Please use the adapter supplied by the manufacturer.
- Please assemble the item according to the instructions. Connect all wires according to matching colour.
- Children should be supervised by adults. The item should not be grabbed, as it becomes a tipping hazard. Keep flammables away from the adapter, as it heats up during operation.
Please view all instructions carefully before assembling. Save this instruction sheet for future reference.
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in its original packing. Keep away from heat and moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used under the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: Reorient or relocate the receiving antenna, Increase the
separation between the equipment and receiver. Connect the equipment to an
outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or experienced radio/TV technician for help.
Video assembly instructions are available online
CAN ICES-003(B)/NMB-003(B)
© Seasonal Visions International Berkeley, CA 94710 Tel: 1-855-428-3921 All Rights Reserved.
MADE IN CHINA.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>