DiSNEP QSD001 TWS Series Wireless Earphone User Manual
- June 16, 2024
- Disnep
Table of Contents
QS-HWTO1
TWS SERIES WIRELESS EARPHONE
User’s manual
Usage Instruction
- Don’t attempt to disassemble the unit and change any part, except there is operation method mentioned in the manual
- Don’t expose the unit to liquid, moisture or humidity, Since it is not a waterproof product
- Disconnect the unit with your BT device and move it to the safe area if the quid get inside the unit
- Don’t assemble or disassemble the unit to avoid electric shock, f there is water on your hands
- Don’t expose the unit to extremely high temperature or dispose of the unit in fire as it will result in an explosion
- Don’t place the unit in an electromagnetic interference environment to avoid malfunction
Packing list
Product schematic description
Product Specification
BT Version V5.3
Transmission distance 10m
Battery capacity 25mAh
laying time About 4 hours (Earphones)
Charging time About 1hours (Earphones)
Rated input 5v 25mA
Charging case specification
Battery capacity. 180mA4
Charging time. About 1 hours
Rated input 5v==-1800A
Playing time About 15 hours (Charging case)
(All technical information is suboiect to actual performance)
Charge the charging case
Conoect the Type-C cable to the 5V power adaptor, and another end to the
charging port of the charging case
Kind reminder. Close the charging case When the blue lght in the charging
compartment flashes quickly, please charge the charging compartment in a
timely manner)
LED Indicator Status
Charging case LED indicator
- To charge warehouse charges (not full) red light flashing
- Charge warehouse tut of electricity.The red ght is steady On
- When the charging oorpartrent is low(below 34V) the be light flashes
- Charging the earphones is not fully charged Charging bey blue hight is on
- Fully charge the earphones. Blue light off
Earphones LED indicator
- Boot blue light long on one second
- Shutdown blue light flashes 3imes
- Earphones paired blue lights flashing
- Earphones connection is sucesstut the lights went out
Product operating instructions
-
Power on
Method 1: Remove the earphones from the charging compartment and turn them on automatically.
Method 2: In the shutdown state, manually hold down and touch 3S to power on the device. -
Power off
Method 1: Put the earphones back in the charging compartment, turn off the earphones and power off.
Method 2: In the disconnected state, hold down and touch for 5S to power off the device. -
Pairing to the BT device
Step 1: Remove the earphones from the charging compartment, the earphones will automatically turn on, and the earphones will automatically form a team after starting.
Step 2: open the BT list of smart devices, search ” Qs-HwT01″ and Connect (single ear use is supported).
Touch control button operating Music playing mode
Let/Font earphone operating
Hands free function
Let/ Fight earphone operating ( incoming call)
Active the voice assistant function (the smart devices support voice assistant
function)
Let/ Fight earphone operating
Restore factory settings
If a single earphone is not paired with a mobile phone after being powered on,
press 5 to clear the paining information and power off
Name and content of hazardous substances in products
Part Name | Harmful materials |
---|---|
Pb | Hg |
Printed circuit assembly | 0 |
Small structural | |
parts such as shell | 0 |
Thus form is compiled in accordance with ST11364
O: Indicates that the content ot the hazardous substance in all homogeneous
materials of the part is in Below the limit requirements specified in GB/T
26572
X: Indicates that the content of the hazardous substaooe in at least one of
the homogeneous materials of the part ex0eeds
The limit requirements specified in GB/T 26572
The parts marked with X on the torm are all harmtul due to the imitations ot
global technological development. Substitution of substances.
Warranty statement
Disclaimer
This user manual does not have any form of guarantee,position expression or
other implication.The mentioned products,specifications and information are
for reference only,and the content will also be updated on the web at any time
without additional separate notice
Warranty statement:
The product attached to this document is guaranteed as follows:lf the
product is twelve (12) months from the date of purchase(“Warranty
Period”),under normal conditions of use due to quality defects damaged,can be
repaired.Free repair;free replacement if the manufacturer confirms that it
cannot be repaired; repaired or replaced product.Continue to enjoy the
warranty during the remaining warranty period (the shortest not less than 30
days).Purchased by sale the ticket date shall prevail;if the purchase date
cannot be determined,the warranty period shall be 13 (13) months
If you apply for a warranty,please call the product service hotline first and
execute it in the manner instructed by us.When applying for warranty,you need
to provide an accurate,complete and clearly filled out valid sales invoice.
The above guarantee does not apply to the following situations:
- Exceeding the validity period of the three packs;
- Altering the warranty card and product code does not match the product body;
- Causes caused by misuse,abuse or improper transportation,use,maintenance or storage obstacles or damage;
- Failure or damage caused by force majeure (such as earthquake,war,disaster,etc.) or accident bad;
- The zipper and tower buckle are damaged due to excessive force;
- Disconnection or tearing caused by excessive load;
- Any damage caused by sharp objects;
- Products with signs of burning of flooding;
- Damage caused by unauthorized disassembly;
- Aging,discoloration,abrasion,rupture and other losses that occur during the normal use of the product.
- If the original identification label of the product is changed or damaged,this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are
not within the scope of the guarantee.You should check on the spot and raise
objections to any discrepancies.
The above guarantees are all guarantees we make regarding the products,and are
only applicable in mainland China.Nothing in this document affects consumer
rights that cannot be excluded or restricted under the law profit.
Service supervision hotline:
400-885-8808
FCC Statement
This equipment has been tested and found to comply with the limits for a
ClassB digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
FCC ID:2BAQF-Q5D001
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>