Aqara CD-M03D Roller Shade Controller Instructions

: July 29, 2024
: Aqara

Table of Contents

Roller Shade Controller T1S User Manual
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Roller Shade Controller T1S User Manual

Product Introduction

The Aqara Roller Shade Controller T1S transforms traditional roller blinds, soft gauze curtains, Shangri-La curtains, and other window treatments into smart devices. Featuring a built-in Zigbee wireless communication module, it easily connects to the hub, enabling integration with other smart devices. This connection opens up a world of smarter living scenarios, enhancing your quality of life with customizable functions.

RJ11 Interface
Up Button
Stop Button
Down Button
Reset Button
Control Unit
Waterproof Bag
Motor
Power Cord

If the installation area is highly humid, ensure the control box is securely sealed within a waterproof bag, with the bag’s opening positioned downwards.
Avoid spilling water or detergent on the main unit and power plug to prevent electric shock or fire due to a short circuit.
The US version comes with a power plug, no need to purchase and install separately.

Installation Instructions

For detailed installation instructions for the Roller Shade Controller T1S, please scan the QR code provided below.

Please make sure the power cord is connected properly.

This product requires a minimum tube diameter of 25mm and is compatible with specifically designed finished curtains.
Installation involves handling high voltage; therefore, it should be carried out by a professional curtain engineer following precise specifications.
Repairs should not be attempted by the user; instead, they should be conducted by authorized service professionals.
Prior to installation, ensure all extraneous wires are removed and disconnect any devices not essential for the installation process.”

Warnings

This product is designed exclusively for indoor use. Please refrain from using it outdoors.
Ensure the product is kept dry and protected from moisture. Do not expose it to water or any other liquids.
Avoid placing this product near any sources of heat.
Keep the fixed controller out of children’s reach and ensure the control box is placed in a location inaccessible to children.
Regular inspections are recommended to check for any installation imbalances or signs of cable wear. Should repairs or adjustments become necessary, discontinue use immediately.
When conducting maintenance on adjacent areas, such as window cleaning, ensure this equipment is not in use and the power supply is disconnected.
This device should not be used by individuals (including children) who have physical, sensory, or mental impairments, or a lack of experience and knowledge, unless they are under supervision or have been instructed on how to use the device safely.
If the power cord is damaged, it must be replaced by a professional from the manufacturer’s maintenance department or a similarly qualified department to prevent any hazards.
It is important for the safety of persons to follow these instructions. Save these instructions. Follow all instructions, since incorrect installation can lead to severe injury.
Do not allow children to play with fixed controls. Keep remote controls away from children.
Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
Prohibited for persons involving diminished physical(including children), sensory, or mental capacity, or lacking experience and knowledge of inapplicable.

Quick Setup

Follow the instructions provided with the hub to add it to the app.
Open the app and tap the “+” icon in the upper right corner of the homepage. Navigate to the “”Add Device”” page, locate the Aqara Roller Shade Controller T1S, and adhere to the on-screen instructions.
For assistance, please visit: www.aqara.com/support.

If adding the device is unsuccessful, move it closer to the hub and attempt the process again.
Should the connection fail or require re-establishment, press and hold the reset button for 5 seconds until the blue light activates, then release. If the blue indicator light blinks, proceed to reconnect.

Instructions for use

Function

|

Illustrate

---|---
Set up/down stroke| To adjust the curtain to the desired up/down stroke limit, use the up key and down key to move the curtain to the required position. Once the position is determined, quickly press the stop key five times in succession. The motor will rotate forward and then reverse once to indicate that the up/down stroke limit has been successfully set.
Delete stroke| To delete the stroke settings, press and hold both the up key and the down key simultaneously for 3 seconds. Release them once the indicator light turns blue. The motor will then rotate forward and reverse once each, signifying that the stroke settings have been successfully cleared.
Motor commutation | To reverse the motor’s direction, press and hold the stop button for 5 seconds. Release the button when the indicator light turns blue. The motor will then rotate once in the forward direction and once in the reverse direction, indicating that the motor’s direction has been successfully reversed.

Indicator light description

State	Illustrate
Blue light flashes 1 time	Power up or click a button
Blue light flashes quickly	Networking
Blue light stays on	The motor has been connected to the network and is

running
Red light stays on| The motor is not connected to the network and is running

Basic parameters

Product Name: Roller Shade Controller T1S
Model: CD-M03D
Product Size85.8×86×37.55 mm(3,38 x 3,39 x 1,48 in.)
Rated Input: 100-240V~50/60Hz
Rated Speed: 25r/min
Wireless Protocol: Zigbee
Outer Diameter: 25 mm
Motor Length: 465 mm
Rated Current: 0.3A
Rated Power: 20W
Rated Torque: 1.2N·m
Work Hours: S2 4min
Protection Level: IP40
Insulation Level: Class A
Operating Temperature: -20°C ~ +55°C (- 4° – 131°F)
Operating Humidity: 10% – 95% RH, no condensation
Zigbee Operation Frequency: 2405-2480 MHz
Zigbee Maximum Output Power ≤13 dBm
What’s in the Box: Roller Shade Controller × 1, Wired Remote × 1, User Manual × 1, Splash-Proof Bag × 1, Brackets × 2, End Cap × 1

EU Declaration of Conformity

Hereby, [Lumi United Technology Co., Ltd] declares that the radio equipment type [Roller Shade Controller T1S, CD-M03D]are is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.aqara.com/DoC/

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health.

Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
Federal Communications Commission (FCC) compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment”

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio for compliance could void the user’s authority to operate the equipment frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.uncontrolled environment. This equipment should be installed and operated

IC NOTICE TO CANADIAN USERS

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES – 003.
This device complies with RSS – 247 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufacturer: Lumi United Technology Co., Ltd.
Address: Room 801-804, Building 1, Chongwen Park, Nanshan
iPark, No. 3370, Liuxian Avenue, Fuguang Community, Taoyuan
Residential District, Nanshan District, Shenzhen, China
Online Customer Service: www.aqara.com/support
Email: support@aqara.com

Install code

Scatola

| Manuale| Neto| Pellicola|

Borsa

---|---|---|---|---

PAP 21

| PAP 22| EPE 7| PET 1| LDPE 4
Carta| Carta| Plastica| Plastica|

Plastica

RACCOLTA DIFFERENZIATA

Verifica le disposizioni del tuo Comune.
Separa le componenti e conferiscile in modo corretto.