V-TAC VT-7989 LED Designer Hanging Light Instruction Manual

Table of Contents

Follow the installation instructions provided in the manual.
Ensure the power source is switched off before installation.
Only replace the LED light source with the help of a professional.
Follow proper safety precautions during replacement.
Clean the fixture regularly with a soft, dry cloth.
Avoid using harsh chemicals or abrasive materials that may damage the surface.
This hanging light is suitable for indoor use only.
Do not expose it to water or extreme temperatures to prevent damage.
Dispose of the product responsibly following local regulations for electronic waste disposal.

Q: Can I replace the control gear myself?
A: It is recommended to have the control gear replaced by a professional to ensure proper installation and safety.
Q: Is this light fixture dimmable?
A: No, this LED hanging light is not dimmable.

Thank you for selecting and buying the V-TAC product.
V-TAC will serve you the best.
Please read these instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product.
They are trained and ready to serve you at your best.
The warranty is valid for 2 years from the date of purchase.
The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear.
The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.
The products are suitable for 10-12 Hours Daily operation.
Usage of product for 24 Hours a day would void the warranty.
This product is warranted for manufacturing defects only.

WARNING!

Please make sure to turn off the power before starting the installation.
Installation must be performed by a qualified electrician.
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Proper grounding should be ensured throughout the installation.
For Indoor Use Only

Symbols

This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.

Features

Switch off the power before starting the installation.
Use screws to fix the mounting bar to the junction box.
Make the wire connections with connectors.
- Connect the live wire (L) from the fitting to the live wire from the main power supply.
- Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
- Connect the earth wire from the fitting to the earth wire from the main power supply.
- Please pay close attention and make sure the wires are not exposed outside when wiring connections.
Use screws to fix the canopy to the mounting bar.
Check if the installation is completed and turn on the power.

Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BULL KARAVELOW 9B