AMC iLive 2 Wireless Microphone System Instruction Manual
- September 10, 2024
- AMC
Table of Contents
iLive 2 Wireless Microphone System
“`html
Specifications:
Model: iLive 2 Wireless Microphone System
Brand: iLive
Type: Wireless microphone system
Product Information:
The iLive 2 Wireless Microphone System is a high-quality
wireless microphone system designed for professional use. It
provides reliable and clear audio transmission, making it ideal for
various applications such as live performances, public speaking,
and more.
Safety Instructions:
-
Read all instructions before using the product.
-
Avoid using the product near water sources or heat-producing
devices. -
Ensure the microphone has a stable base and is securely
fixed. -
Avoid prolonged exposure to high volume levels to prevent
hearing damage. -
Use the specified power supply and avoid sharing outlets with
other devices. -
Prevent objects from falling into liquids or spilling on the
device. -
Do not attempt to open the device or remove covers. Seek
qualified service personnel for servicing.
Product Usage Instructions:
Before You Start:
Before using the iLive 2 Wireless Microphone System, ensure you
have read the user manual completely and understood all safety
instructions.
Operation:
-
Front Panel: The front panel of the system
provides controls for adjusting microphone settings and volume
levels. -
Rear Panel: The rear panel houses ports for
connecting additional audio equipment. -
Handheld Microphone: The handheld microphone
included in the system offers a comfortable grip and clear audio
pickup.
Specifications:
The general specifications of the iLive 2 Wireless Microphone
System include details on frequency range, signal-to-noise ratio,
operating range, and more. Refer to the user manual for detailed
specifications.
FAQ:
Q: Can I use the iLive 2 Wireless Microphone System
outdoors?
A: Yes, you can use the system outdoors, but
ensure it is protected from direct exposure to water or extreme
temperatures.
Q: How do I pair the microphone with the
receiver?
A: Follow the pairing instructions provided in
the user manual to sync the microphone with the receiver for
optimal performance.
“`
User iLive 2 Manual Wireless microphone system
Safety instructions
When using this electronic device, basic precautions should always be taken,
including the following:
1 Read all instructions before using the product.
2 Do not use this product near water (e.g., near a bathtub, washbowl, kitchen
sink, in a wet basement or near a swimming pool etc).
3 Use this device when you are sure that paging microphone has a stable base
and it is fixed securely.
4 This product, in combination with loudspeakers and amplifier may be capable
of producing sound levels that could cause permanent hearing loss. Do not
operate for a long period of time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or ringing in the ears, you
should consult with otorhinolaryngologists.
5 The product should be located away from heat sources such as radiators, heat
vents, or other devices that produce heat.
6 The product should be connected to a power supply that is described in the
operating instructions or are marked on the product.
7 The power supply should be undamaged and never share an outlet or extension
cord with other devices. Never leave device plugged into the outlet when it is
not being used for a long period of time.
8 Care should be taken that objects do not fall into liquids and liquids would
not be spilled on the device.
9 The product should be serviced by qualified service personnel if:
The power supply or the plug has been damaged.
Objects have fallen into or liquid has been spilled on the product.
The product has been exposed to rain.
The product has been dropped or the enclosure damaged.
10 There are some areas with high voltage inside, to reduce the risk of
electric shock do not remove cover of the microphone receiver or power supply.
The cover should be removed by the qualified personnel only.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
To reduce the risk of electric shock, do not remove screws. No user- serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire, electric shock or product damage, do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
USER MANUAL iLIVE 2 Wireless Microphone System
Table of contents
Before you start
Introduction ……………………………………………………………………………………………………………………………………2 Features
…………………………………………………………………………………………………………………………………………….2
Operation
Front panel ……………………………………………………………………………………………………………………………………..3 Rear
panel………………………………………………………………………………………………………………………………………..4
o
Handheld microphone ………………2….5…………………………………………………………………………………………5
Body pack transmitter ………………………………………………………………………………………………………………5 Receiver
operation……………………………………………………………………………………………………………………..6 Handheld microphone
operation………………………………………………………………………………….6-7 Body pack transmitter operation
………………………………………………………………………………………..7 Synchronization
…………………………………………………………………………………………………………………………..8 Receiver’s
menu……………………………………………………………………………………………………………………………9
Specifications
x
General specifications……………………………………………………………………………………………………………..14
USER MANUAL iLIVE 2 Wireless Microphone System
y
y
8mm
Before you start
Wireless microphone systems with 32 selectable channels and automatic channel targeting. iLive2 wireless microphones sets are combined with handheld or body pack transmitter with variety of microphone selection to use with body pack.
FEATURES
· 32 selectable channels · Automatic channel targeting ACT synchronization ·
High brightness LCD display · RF, AF level meter · Digital volume and squelch
control · Lock menu function · Handheld microphone with LCD display
· RF power selector for battery life saving mode or working distance range
increase
· Excellent quality metal body microphone equipped with dynamic cardioid
capsule
· Body pack transmitter with LCD display, channel, frequency and low battery
indications
· Balanced mic-level output (XLR connector)
· Line-level output (unbalanced 6,3mm TS jack connector. Jack/Jack cable
included
02
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
Front Panel
1. IR transmitter | 2. LCD display | 3. SYNC button | 4. SET button | 5. Navigation buttons | 6. Power switch
03
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
Rear Panel
1. Antenna B connector | 2. Audio output | 3. Main power connector | 4. Antenna A connector
04
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
Handheld microphone
1. LCD display | 2. IR receiver | 3. Power button | 4. RF power selector | 5.
Battery holder | 6. Battery cover
Body pack
1. Antenna | 2. LCD display | 3. IR receiver | 4. Battery cover lock | 5. Battery holder | 6. Battery cover | 7. Power button | 8. Microphone connector
05
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
Receiver operation
SYNC BUTTON Press this button to transmit data from receiver to transmitter in
order to synchronize microphone or body pack transmitter and receiver.
NAVIGATION BUTTONS These buttons are designed to navigate receivers menu and
adjust settings.
SET BUTTON Short press of this button shows number of current channel for two
seconds on LCD screen if channel frequency are displayed for default and
otherwise, shows the channel frequency if channel number are set for display
default. Long press brings menu on the screen, in order to enter the submenu
press SET button one more time. Use navigation buttons to navigate menu or
adjust settings.
LCD DISPLAY Displays the current settings, menu and other information, like RF
level, AF level, volume, frequency or channel, lock status, mute status and
which antenna A or B is active at the moment.
IR TRANSMITER IR transmitter allows synchronize microphone or body pack and
receiver by establishing handheld microphone or body pack radio frequency to
the same as the receiver.
POWER SWITCH Press power switch for 3 seconds to turn on/off the power.
ANTENNA CONNECTOR This connector designed to connect antenna to the receiver.
AUDIO OUTPUT Balanced XLR mic level and unbalanced 6,3mm Jack line level audio
output.
MAIN POWER CONNECTOR Connector for DC 12 V 16 V 1.25A power supply.
Handheld microphone operation
LCD DISPLAY Displays the current frequency, channel and transmitter’s battery
level.
IR RECEIVER IR receiver allows synchronizing microphone and receiver by
establishing handheld microphone radio frequency to the same as set in
receiver.
POWER BUTTON Press power button for 3 seconds to turn on/off the power.
06
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
RF POWER SELECTOR
Lo mode – reduces transmitters power, it helps to expand batteries discharging
time, but affects working distance. Low radio transmitter power gives a short
working distance. Hi mode – ensures maximum working distance and performance,
but discharge batteries more quickly.
IR RECEIVER IR receiver allows synchronize body pack and receiver by
establishing body pack radio frequency to the same as set in receiver.
BATTERY COVER LOCK Push cover lock in order to remove battery cover.
BATTERY HOLDER Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong polarity can damage transmitter!
BATTERY HOLDER Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong polarity can damage transmitter!
BATTERY COVER Remove battery cover in order to insert or replays batteries.
BATTERY COVER Remove battery cover in order to insert or replays batteries.
Body pack transmitter operation
POWER BUTTON Press power button for 3 seconds to turn on/off the power.
ANTENNA Antennas for RF signal transmitting to the receiver. Covered antenna
can reduce working distance, try to keep antenna uncovered in order to
guaranty maximum working distance.
LCD DISPLAY Displays the current frequency, channel and low battery
indication.
ANTENNA CONNECTOR This connector designed to connect antenna to the receiver.
MICROPHONE CONNECTOR Balanced XLR and unbalanced 6,3mm Jack audio output.
07
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
Synchronization
Press infrared data transfer button (SYNC) to transmit data from receiver to
transmitter in order to synchronize microphone and receiver radio frequency.
PUSH SYNC
The distance between the devices should be proximally 20cm.
IMPORTANT: During synchronization IR receiver and IR transmitter should be directed to each other.
08
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
Receiver’s menu PUSH
SET
for 3 sec.
Long press of SET button brings main menu on the screen,
in order to enter the submenu press SET button one more time. Use navigation buttons to navigate menu and adjust
PUSH button
PUSH button
settings.
PUSH button
PUSH button
PUSH button
09
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
F-MODE MENU
Activate F-mode menu by pressing SET button for 3 sec. This menu consists from
TUNE, CHANNL and EXIT sub menu.
PUSH SET for 3 sec.
PUSH SET
to select
PUSH
button
PUSH
button
10
USER MANUAL iLIVE 2 Wireless Microphone System
PUSH SET
to select
PUSH SET
to select
PUSH SET
to select
Operation
TUNE MENU
Select tune menu in order to change manually receiver’s frequency in 50 kHz
steps.
CHANNEL MENU
Select CHANNL to set one of the 32 channel’s presets. Before the selecting
CHANNL, the default display in the DISPLY menu should be set to CHANNL.
PUSH SET for 3 sec.
PUSH SET to select
PUSH SET to select
PUSH button
PUSH SET to select
PUSH SET to select
PUSH SET for 3 sec.
PUSH SET to select
PUSH button
PUSH SET to select
PUSH button
PUSH SET to select
PUSH SET to select
11
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
DISPLAY MENU
Display menu allows to change the default screen view from frequency to
channel and otherwise. Select “CHANNL” to display channel number in the screen
or select “FREQUE” to display channel frequency in Mhz.
PUSH SET for 3 sec.
PUSH
button
X4
PUSH SET to select
PUSH button
PUSH SET to select
PUSH SET to select
SQUELCH MENU
The squelch level is adjustable in 5dB steps from 0dB to 20dB. Selecting a
smaller value increase the squelch threshold, selecting a higher value reduce
the squelch threshold. If the squelch threshold is set too high, the
microphone working distance can be reduced.
PUSH SET for 3 sec.
PUSH
button
X3
PUSH SET to select
PUSH button
PUSH SET to select
PUSH SET to select
12
USER MANUAL iLIVE 2 Wireless Microphone System
Operation
VOLUME MENU
Select VOLUME menu to adjust audio output level.
PUSH SET for 3 sec.
PUSH
button
X4
PUSH SET to select
PUSH button
EXIT MENU
Select to exit from menu.
PUSH SET for 3 sec.
PUSH
button
X2
PUSH SET to select
13
USER MANUAL iLIVE 2 Wireless Microphone System
LOCK MENU
Lock menu allows lock main panel buttons, except power and SETTING buttons. Please set lock function to off, for unlock.
PUSH SET for 3 sec.
PUSH
button
X2
PUSH SET to select
PUSH button
PUSH SET to select
PUSH SET to select
Specifications
GENERAL
Power supply Mic level output Line level output Receiver way Intermediate
frequency Antenna T.H.D Sensitivity Image rejection Max. audio output
Dimensions (H x W x D) Weight Material
iLIVE 2 receiver 12-15 V DC, 1.25 A Balanced XLR Unbalanced 6,3 mm TS JACK Two frequency conversion super-heterodynes 10,7 MHz BNC < 0,7 % 6 dB V 36 dB 0 dB 45 mm x 210 mm x 206 mm 1.3 kg Steel enclosure, aluminum front panel
Carrier frequency range Modulation Channels Audio frequency response S/N ratio
Antenna Transmitter’s power
Working range
Polar pattern Battery Dimensions Weight Material
iLIVE 2 handheld transmitter
606 MHz – 621 MHz FM 32 45 Hz – 18 kHz > 105 dB Built-in spiral antenna 3 mW
60 m (Note: actual range depends on RF signal absorption, reflection and
interference) Cardioid 2 x 1,5 V AA Alkaline battery 240 mm (lenght) 302 g
Aluminum
14
USER MANUAL iLIVE 2 Wireless Microphone System
Specifications
GENERAL
Carrier frequency range Modulation Channels Audio frequency response S/N ratio
Antenna Input connector Transmitter’s power
Working range
Polar pattern Battery Dimensions Weight Material
iLIVE 2 body pack transmitter
606 MHz – 621 MHz FM 32 45 Hz – 18 kHz > 105 dB 1/4 wave antenna 4 pin mini
XLR connector 3 mW 60 m (Note: actual range depends on RF signal absorption,
reflection and interference) Cardioid 2 x 1,5 V AA Alkaline battery 110 mm x
64 mm x 25 mm 76 g Plastic
15
USER MANUAL iLIVE 2 Wireless Microphone System
Specifications
GENERAL
Capsule type Impedance Sensitivity Frequency Connectors Phantom power voltage
Cable length Weight Colour Accessories
HM Condenser 200 -47 dB 45 Hz – 18 kHz 4 pin mini XLR connector 5V DC 1 m 15 g Skin (RAL 1014) Windscreen
16
USER MANUAL iLIVE 2 Wireless Microphone System
Capsule type Impedance Sensitivity Frequency Connectors Phantom power voltage Cable length Weight Colour Accessories
LM Condenser 200 -46 dB 50 Hz – 18 kHz 4 pin mini XLR connector 5 V DC 1 m 21 g Black (RAL 1017) Windscreen
The specifications are correct at the time of printing this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>