STARSHIP Seer Mini Power Bank 35W User Manual

STARSHIP Seer Mini Power Bank 35W

Product information

• Product Name: Starship Seer
• Item model number: SP035
• Port type: USB-Cx1 USB-Ax1
• USB-C Input: 5V/3A 9V/2A 12V/1.5A 15V/2A
• USB-C Output: 5V/3A 9V/3A 12V/2.9A 15V/2.3A 20V/1.75A
• USB-A Output: 5V/3A 9V/2A 12V/1.5A
• USB-A+USB-C Total Output: 5V/4A
• Battery Energy: 10000mAh/9800mAh 36Wh/35.28Wh
• Rated capacity: 5600mAh(5V /3A)
• Dimensions: 90x65x29mm/3.54×2.56×1.14 in
• Product weight: 222g/7.83 oz
• Battery Type: 21700 Lithium-ion battery cell
• Conversion Efficiency: 70%

Switch machine

• Power on: Long press the button to power on
• Power off: After powering on, press the button three times to power off on the time interface.

Set up

• Clock mode
  Press and hold the button to turn on. The interface now is the clock mode interface.

• Time setting
  Long press the button to enter the time setting mode, click the button to adjust each item, and long press to enter the next item, until the second item is set, the clock begins to run.

• Alarm clock setting
  After the clock setting is completed, the alarm clock icon light will flash. Press and hold the button. The alarm clock icon light will stay on. Then click the button to set AM/PM, hour, and minute, and then long press to enter the next item.

• Turn off the alarm clock
  After the alarm clock buzzes, click the button to turn off the alarm clock buzzer. If the buzzer is not operated and continues to work for 30 seconds, it will automati­ cally shut off.

• Power mode
  Long press the button to turn on, and enter the time display interface. Short press the button again to switch to power mode. The interface displays real-time input and output power and remaining charging time.ly shut off.

Product performance failure table

2.  The plug is loose and cannot be inserted into the socket.

3.  Inability to charge electronic devices.

Non-Warranty Regulation

1. Unauthorized repair, misuse, collision, neglect, abuse, fluid ingress, accident, alteration, improper use of accessories.
2. The validity period of the three packs has been exceeded.
3. Damage caused by force majeure.
4. The performance failures listed in the “Product Performance Failure Table” are not met.
5. This product has performance failures listed in the “Product Performance Failure Table” due to human reasons.

Battery level description

The remaining power is displayed as a numerical percentage.

Algorithm description

Remaining power
The percentage of remaining power is calculated based on battery coulomb calculation (the internal percentage of the power chip minus the percentage of clock power consumption).

Remaining charging time
The remaining time (the REMIN icon is on) is measured based on the coulomb counter and the current input/output power calculation, and the clock power consumption is not included in the calculated range. For example, if the load is not connected after clicking Bright Screen, the estimated time will display “99:99”. At this time, after connecting to a 17W load, the estimated time will display “02:QQ”, which means that the current battery life is 2 hours. The charging conditions are analogous in turn.

Use environment

1. Ambient temperature for use: 0°C-35°C in non-tropical areas below 2000M altitude.
2. Storage ambient temperature: -20°C-40°C
3. Indicates that the device is intended for use in non-tropical areas only.
4. Indicates that the device is only suitable for use in areas below 2000M altitude.
5. Indicates that the device is intended for indoor use only.
6. Avoid using electrical appliances or loads that exceed the output current of this product (the circuit will be protected, with no output).

Precautions

Please read all instructions and warnings before using this product. Improper use will damage the product or personal safety.

1. Do not store this product in high temperature, strong light, and strong magnetic field environments, and do not place it in other harsh environments such as fire sources. Allow to dry naturally before use. This form is prepared according to the provisions of SJ/T 11364.
2. Improper use of the product may easily damage the product itself or endanger personal and property safety.
3. Consumers will bear all the consequences themselves if they violate the product manual and use the product improperly, causing personal and property damage. The company will not bear any legal responsibility.
4. Non-professionals are strictly prohibited from disassembling this product.
5. Avoid strong physical effects, including knocking, overdrawing, trampling, squeezing, etc.

Declaration of Toxic and Hazardous Substances in Electronic Information Products

Part

Name

| Toxic and hazardous substances and elements
---|---

Pb

| ****

Hg

| ****

Cd

| ****

Cr6+

| PBB| ****

PBDE

PCB| | 0| 0| 0| 0| 0
Plastics| 0| 0| 0| 0| 0| 0
Metals| | 0| 0| 0| 0| 0
Components| 0| 0| 0| 0| 0| 0

This form is prepared according to the provisions of SJ/T 11364.

• 0: indicates that the content of this toxic and hazardous substance in all homage nous materials of this part is below the limit requirement specified in GB/T 26572 standard.
• X : indicates that the content of this toxic and hazardous substance in at least one homogeneous material of this part exceeded the limit requirement specified in the GB/T 26572 standard.
  • The information in this form is the data provided to the supplier and the test results that meet the RoHS environmental protection requirements.

INTELLIGENT DIGITAL SCREEN

USB-A & USB-C

STARSHIP SEER

VISIT:

MADE IN CHINA

Documents / Resources

| STARSHIP Seer Mini Power Bank 35W [pdf] User Manual
Seer Mini Power Bank 35W, Seer, Mini Power Bank 35W, Power Bank 35W, Bank 35W
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>