LANCOM SYSTEMS 1803VA-4G SD-WAN VoIP Gateway Owner’s Manual

: September 10, 2024
: LANCOM SYSTEMS

Table of Contents

LANCOM SYSTEMS 1803VA-4G SD-WAN VoIP Gateway
Specifications
Product Usage Instructions
FAQ
Mounting & connecting
LED description & technical details
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LANCOM SYSTEMS 1803VA-4G SD-WAN VoIP Gateway

Specifications

Model: LANCOM 1803VA-4G
Antenna connectors: 4G
Interfaces: USB-C, Analog, WAN (SFP / TP combo port), Ethernet, ISDN, USB, VDSL / ADSL
Power supply : Supplied power adapter

Product Usage Instructions

Mounting & Connecting:

4G Antenna Connectors: Screw the supplied mobile radio antennas to the appropriate connectors.
Power Supply Connection: Use only the supplied power adapter.
Reset Button: Short press for device restart, long press for device reset.
Micro SIM Card Slot: Slide the SIM card into the slot ensuring it clicks into place.
Serial USB-C Configuration Interface: Use a USB-C cable for optional configuration.
Analog Interfaces: Connect analog devices via RJ11 or TAE adapters.
WAN Interfaces: Insert LANCOM SFP module or connect WAN TP interface to a modem.
Ethernet Interfaces: Use kiwi-colored connectors to connect to PC or LAN switch.
ISDN Interfaces: Internal ISDN bus connections.
USB Interface: Connect USB data medium or printer.
VDSL / ADSL Interface: Connect using the enclosed DSL cable.

Before Startup:

Refer to the enclosed installation guide for intended use information.
Operate only with professionally installed power supply at a nearby accessible socket.

Setting Up:

Use self-adhesive rubber pads when setting up on a table.
Avoid placing objects on top or stacking multiple devices.
Keep ventilation slots clear of obstruction.

Rack Installation:
Rack installation possible with optional LANCOM CPE blackline Rack Mount / CPE blackline Rack Mount Plus (sold separately).

FAQ

Can I use third-party accessories with the LANCOM 1803VA-4G?
No, support for third-party accessories is not provided. Please use only approved accessories.

Mounting & connecting

4G antenna connectors
Screw the supplied mobile radio antennas to the appropriate connectors.
Power supply connection socket
Use only the supplied power adapter!
Reset button
- Short press > device restart
- Long press > device reset RESET
Micro SIM card slot
- Slide the SIM card into the SIM card slot using the marker to ensure that the card is the right way round. Ensure that the SIM card clicks into place on insertion.
- To remove the card from the device, press the card lightly into the device. Let go to release the SIM card from the slot.
Serial USB-C configuration interface
A USB-C cable can be used for optional configuration of the device on the serial console. (cable not included)
Analog interfaces
Connect analog terminal devices to the analog interfaces either directly via RJ11 or with the help of the enclosed TAE adapters.
WAN interfaces (SFP / TP combo port)
- Insert a suitable LANCOM SFP module (e.g. 1000Base-SX or 1000Base-LX) into the WAN SFP interface. Choose a cable compatible with the SFP module and connect it as described in the SFP module’s mounting instructions www.lancom-systems.com/SFP-module-MI (SFP module and cable are not included).
- If desired, alternatively connect the WAN TP interface to a WAN modem using an Ethernet cable.
Ethernet interfaces
Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH 1 to ETH 4 to your PC or a LAN switch.
ISDN interfaces
- ISDN 1: Internal (NT) ISDN bus
- ISDN 2: Internal (NT) ISDN-bus
USB interface
Connect a USB data medium or a USB printer to the USB interface. (cable not supplied)
VDSL / ADSL interface
Connect the VDSL interface and the TAE socket of the provider using the enclosed DSL cable for the IP-based connection. (For more information, please contact your Internet provider).

Please observe the following when setting up the device

When setting up on the table, use the enclosed self-adhesive rubber pads, if applicable.
Do not rest any objects on top of the device and do not stack multiple devices.
Keep all ventilation slots of the device clear of obstruction.
Rack installation with the optional LANCOM CPE blackline Rack Mount / CPE blackline Rack Mount Plus (separately available)

LED description & technical details

A Power
- Off Device switched off
- **Blue, permanently*** Device ready for operation or device paired and LANCOM Management Cloud (LMC) accessible.
- **1x blue, inverse blinking*** Connection to LMC active, pairing OK, device not claimed
- **2x blue, inverse blinking*** Pairing error or LMC activation code/ PSK not present.
- **3x blue, inverse blinking*** LMC not reachable resp. communication error
B Online
- Off WAN connection not active
- Blue, blinking WAN connection in progress (e.g. PPP negotiation)
- Blue, permanently WAN connection active
C WAN
- Off No link available / interface switched off
- Blue, permanently Link available, no data transmission
- Blue, flickering Data transmission
D SFP
- Off No link available / interface switched off
- Blue, permanently Link available, no data transmission
- Blue, flickering Data transmission
E DSL
- Off Interface switched off
- Blue, blinking / fast blinking
- DSL Handshake
- DSL Training
- Blue, permanently DSL Sync
F Analog 1 / Analog 2
- Off Interface switched off
- Blue, permanently Interface activated
- Blue, blinking Active incoming or outgoing call
G ISDN 1 / ISDN 2
- Off Interface switched off
- Blue, permanently D channel active
- Blue, blinking slowly Active incoming or outgoing call
- Blue, flashing BUS faulty, no terminal device on
H ETH1 – ETH4
- Off No link available or interface switched off
- Blue, permanently Link available, no data transmission
- Blue, flickering Data transmission
I 4G
- Off Cellular interface switched off
- Blue, blinking Registration on the mobile radio system in progress
- Blue, permanently Logon to the mobile radio system successful
- Blue, flickering Data transmission
- Blue, flashing Hardware error
- Blue, fast flashing Marginal reception quality
J VoIP
- Off No SIP accounts defined or VCM disabled
- Blue, blinking Not all defined and active SIP accounts have been registered (possibly still being established)
- Blue, permanently All defined and active SIP accounts (outgoing) have been registered successfully
K VPN
- Off No VPN connection active
- Blue, blinking VPN connection in progress
- Blue, permanently VPN connection active
Hardware
- Power supply
- 12 V DC, external power adapter
- For an overview of the power supplies compatible with your device, see www.lancom-systems.com/kb/power-supplies.
- Environment Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing
- Housing Robust plastic housing, connectors on the back, prepared for wall mountin; dimensions 293 x 44 x 190 mm (W x H x D)
- Fan 1 quiet fan
Interfaces
- VDSL2 VDSL2 acc. to ITU G.993.2; profiles 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a, 35b
- VDSL Supervectoring acc. to ITU G.993.2 (Annex Q)
- VDSL2 vectoring acc. to ITU G.993.5 (G.Vector)
- Compatible with VDSL2 and with Deutsche Telekom‘s U-R2 connection (1TR112)
- ADSL2+ over ISDN acc. to ITU G.992.5 Annex B/J with DPBO, ITU G.992.3 and ITU G.992.1
- ADSL2+ over POTS acc. to ITU G.992.5 Annex A/M with DPBO, ITU G.992.3 and ITU.G.992.1
- Supports only one virtual circuit in ATM (VPI-VCI pair) at a time
WAN (Combo port) SFP / TP
- WAN SFP: Slot for small form-factor pluggable Gigabit Ethernet transceiver (mini-GBIC). Compatible with optional LANCOM SFP modules for fiber optic connections over short. Switched as WAN port at delivery, can be configured as LAN port.
- WAN TP: 10 / 100 / 1000 Base-TX, Autosensing Full duplex, Auto node hub
ETH
- 4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch ex-factory.
- Up to 3 ports can be switched as additional WAN ports.
USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COMport servers), or USB data media (FAT file system)
Analog 1 / Analog 2 Use the cables from your analog terminals to connect them to the analog interfaces.
ISDN 1 / ISDN 2 Internal (NT) ISDN busses. Use ISDN cables to connect ISDN devices to the ISDN interfaces.
4G 2 SMA connectors for the supplied dipole rod antennas, compatible LANCOM AirLancer antennas for 4G, or from other manufacturers. Please respect the restrictions which apply in your country when setting up an antenna system (particularly antenna gain / transmission power).
Configuration interface Serial USB-C configuration interface
WAN protocols
Ethernet PPPoE, Multi-PPPoE, PPTP (PAC or PNS) and IPoE (with or without DHCP)
Package content
- Cables 1 DSL cable for an IP-based line, 4.25 m; 1 Ethernet cable, 3m
- Adapters 2 TAE adapters (RJ11 – TAE)
- Antennas 2 4G antennas for 4G / LTE
- Power adapter External power adapter