DIGITUS 55336 4K HDMI Splitter Installation Guide
- September 9, 2024
- DIGITUS
Table of Contents
DIGITUS 55336 4K HDMI Splitter
Specifications
- Input Ports: HDMI x 1
- Output Ports: HDMI x 2
- Vertical Frequency Range: 50/60Hz
- Video Amplifier Bandwidth: 6.0Gbps/600MHz per channel (18Gbps all channels)
- Supported Resolutions: 480i, 576i, 1080i, 480p, 576p, 720p, 1080p, 4K@24/30Hz, 4K@50/60Hz
- Operating Temperature: 0 to 70°C
- Storage Humidity: 5% to 90% RH non-condensation
- Power Consumption (Max): 5W
Product Usage Instructions
Panel Description
- Power LED: Indicates power status.
- 1-2: HDMI Output 1-2 LED indicator: Shows the status of HDMI output ports.
- Auto Mode LED Indicator: ON for Normal Auto EDID Mode.
- Copy Mode LED Indicator: ON for Copy EDID Mode.
- Downscaler Mode LED Indicator: ON for Downscaler EDID Mode.
- EDID: Three buttons for selecting downscaler, auto, and copy modes.
- DC/5V: Micro USB DC 5V Input.
- INPUT: HDMI Input port.
- OUTPUT 1-2: HDMI Output 1-2 ports.
Connection Diagram
Troubleshooting
Problems
- Power light is off, and product is not working.
- Screen splash.
- No picture out only sound out or output pink screen.
- No picture out to FHD TV when connecting a 4K@60Hz source.
Solutions
-
Check power supply connections.
-
Use HDMI 2.0 specification cable within recommended
length. Adjust input signal resolution if needed. -
Ensure downscaler supports input signal.
FAQ
-
Q: What should I do if the power light is off and the product is not working?
A: Check if the power adapter and Micro USB power cable are connected properly. -
Q: Why am I getting no picture out to FHD TV when connecting a 4K@60Hz source?
A: The downscaler function may not support the input signal. Try changing to a supported downscaler signal input.
4K HDMI Splitter, 1×2
Quick Installation Guide
DS-55336
Introduction
The DIGITUS® HDMI Splitter splits your HDMI device’s audio and video signals on two TVs, monitors or projectors with a resolution of UHD 4K / 60 Hz. Via EDID management, you can choose from 3 modes (Copy, Auto, Downscaler). The integrated Downscaler supports the output of 4K contents on Full HD displays. Additionally, a 4K as well as a Full HD display can be operated simultaneously. Thanks to its Auto-EDID function, the splitter automatically recognizes the connected displays – no manual settings required. The video splitter is supplied with power via the Micro USB cable, e.g. via the source device or a USB charging adapter.
Main Features
- Distributes an HDMI signal onto 2 TVs/monitors/projectors
- EDID management: Auto/Copy/Downscaler
- Power supply via Micro USB cable (included)
- Max. resolution: 4K/60Hz (4:4:4)
- Video bandwidth: 18 Gbps
- Supports High Dynamic Range (HDR)
- Supports HDCP 2.2
- Supports Deep Color (36-bit)
- HDMI 2.0
Package Content
- 1x HDMI Splitter
- 1x Micro USB cable (0,7 m)
- 1x QIG
Technical Features
| Input Ports | HDMI x 1 |
|---|---|
| Output Ports | HDMI x 2 |
| Vertical Frequency Range | 50/60Hz |
| Video Amplifier Bandwidth | 6.0Gbps/600MHz per channel(18Gbps all channels) |
| Interlaced(50&60H z) | 480i,576i,1080i |
| Progressive(50&60 Hz) | 480p,576p,720p,1080p,4K@24/30Hz,4K@50 |
/60Hz
Operating Temperature| 0℃ to 70℃
Storage Humidity| 5% to 90% RH non-condensation
Power Consumption (Max)| 5W
Panel Description
| 1.) | Power LED |
|---|---|
| 2.) | 1-2: HDMI Output 1-2 LED indicator |
| 3.) | Auto Mode LED Indicator: ON is in Normal Auto EDID Mode which |
gets the Lower Resolution and Audio Format of the Both Output for the Input
Device to Output the Signal to fit both Outputs
4.)| Copy Mode LED Indicator: ON is In Copy EDID Mode which copy the
Output1 Resolution and Audio Format for the Input Device to Output the Signal
5.)| Downscaler Mode LED Indicator: ON is In Downscaler EDID Mode
which can downscale the Input 4K Resolution to 1080p by the FHD (1080p)
Display and 4K Resolution to 1080p by the FHD (1080p) Display and 4K
Resolution to the 4K Displays Simultaneously.
6.)| EDID: Three EDID select button for downscaler, auto and copy
7.)| DC/5V: Micro USB DC 5V Input
---|---
8.)| INPUT: HDMI Input port
9.)| OUTPUT 1-2: HDMI Output 1-2 port
Connection Diagram
Troubleshooting
| Problems | Causes | Solutions |
|---|---|---|
| Power light is off, and product is not working | **** No power supply | Please |
check if the power adapter and Micro USB power cable is connected properly
Screen splash| HDMI cable may not be HDMI 2.0 specification, or
the cable is too long| Please use at least one High Speed HDMI 2.0 cable that
does not exceed the maximum length of the input/output cable of 5 m for
4K/60Hz (4:4:4) or 10m for 4K@30Hz / 1080p
No picture out only sound out or output pink screen| Maybe the
displays can’t support the resolution or the HDCP| Change a lower resolution
of the input HDMI signal to check whether this issue or not; if not, maybe the
customer should change a non-HDCP input source or HDCP compliant
displays or devices
No picture out| Maybe the|
to a FHD TV| downscaler| The downscaler function
when
connecting a
| function can`t
support the input
| only support the
4K@60Hz 4:4:4 and
4K@60Hz| signal, such as| 4:2:0(HDR 10) signal
source, and| 4K@60Hz 4:2:2| downscaler to 1080p
have normal| HDR signal(Dolby| signal, or there will not
picture to the| Vision) or when| have picture output to
4K HDR| connect one FHD| the FHD TV, the customer
supported TV| TV with a fixed| need change a supported
at the same
time
| 4K@60Hz output
device
| downscaler signal input.
Disclaimer
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you
can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>