V-TAC VT-5007 Wifi Lamp Holder Datasheet

WEEE Number: 80133970

INSTALLATION INSTRUCTION

WIFI LAMP HOLDER

1. Pairing button

02 YEAR
**WARRANTY***

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC Product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product.

SPECIFICATIONS

APP INSTALLATION

Download V-TAC SMART HOME APP by via APP Store Google Play Store (OR) Scan the below QR code to download the V-TAC SMART HOME APP, FAQ

GOOGLE PLAY           IOS

           
FAQ                         MULTI-LANGUAGE MANUAL

INSTALLATION

WARNING!

1. Please make sure to turn off the power before starting the installation.
2. Must be installed by professional electrician.

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

SAFETY INSTRUCTION

STEP (1): AFTER TAKING OUT THE NEW LAMP HOLDER, FIRST CHECK WHETHER THE PARTS OF THE LAMP HOLDER ARE INTACT, AND INSTALL IT IF THERE ARE NO PROBLEMS.
STEP (2): BEFORE INSTALLATION, YOU NEED TO TURN OFF THE ELECTRIC POWER, THEN CLEAN THE OLD LAMP HOLDER AND TIGHTEN THE NEW LAMP HOLDER CLOCKWISE. DO NOT USE EXCESSIVE FORCE WHEN TIGHTENING TO AVOID DAMAGING THE SCREW.
STEP (3): AFTER SCREWING, CHECK WHETHER THE MIDDLE PIECE OF METAL IS CONNECTED TO THE LIVE WIRE. AFTER THE CONNECTION IS COMPLETE, THE LIGHT BULB CAN BE INSTALLED, AND IT CAN BE USED AFTER BEING POWERED ON.
NOTE (1): WHEN INSTALLING THE LAMP HOLDER, YOU MUST FIRST CONFIRM WHETHER THE LAMP HOLDER WE INSTALLED MEETS THE VOLTAGE STANDARD, WHETHER THE MAXIMUM POWER IS NOT EXCEEDED, WHETHER THERE IS ANY DAMAGE, ETC.
NOTE (2): THE MINIMUM CROSS-SECTION OF THE WIRE OF THE LAMP HOLDER SHOULD MEET THE MINIMUM CROSS-SECTIONAL AREA SPECIFIED BY THE COUNTRY, BECAUSE IF THE MINIMUM CROSS-SECTION OF THE WIRE OF THE LAMP HOLDER IS LOWER THAN THE MINIMUM CROSS-SECTIONAL AREA SPECIFIED BY THE COUNTRY, IT IS EASY TO CAUSE THE WIRE TO BURN OUT AND BURN THE LAMP HOLDER AND EVEN A FIRE ACCIDENT. THEREFORE, WHEN WE WIRE THE LAMP HOLDER, WE MUST CHOOSE A WIRE LARGER THAN THE MINIMUM CROSS- SECTION OF THE NATIONAL STANDARD TO ENSURE THE NORMAL OPERATION OF THE LAMP HOLDER IN THE FUTURE.

NOTE: The CE declaration of conformity can be downloaded using the link provided below.
https://www.vtacexports.com/media/ftp-upload/certificates/DOC/EU/VT-5007-DOC- WI-FI%20LAMP%20HOLDER-EU.pdf

Step 1: Open the V-TAC Smart Home App and register. If you already have an existing account with V-TAC Smart Home, please proceed to logging in.

Step 2: To Add a New device tap on the “+” sign(as shown)

Step 3: Make sure your Smart device is powered ON

1) Tap and hold on the power button for 5 seconds to make the device available in pairing mode.
Once in pairing mode the LED will start blinking 3 times repeatedly.
2)Tap on Next to start the pairing of device with the app. (Shown in the image)

Note: If you are facing any trouble while pairing in Quick Pairing mode please try to pair the device in Compatible Pairing Mode (Click on the link as shown on the image).

Step 4: Select your Wifi name and enter the password and tap on Next.

Step 5: Give a name to your device (Ex: Smart Plug/ smart switch) & tap on complete.

Step 6: Your device is now paired and will appear (Ex: as shown in the below image).
a) To turn the device ON /OFF tap on the ON/OFF icon(as shown in the below image).
b) To enter more settings of the Smart device tap on the Name(Ex: Smart Plug as shown below)

Step 7: V-TAC SMART HOME offers multiple features such as;

a) Share – This function allows you to share the access with another user.

b) Schedule: Schedule timer allows you to turn the device ON/OFF with flexibility of choosing date and time. This feature also allows Repeat mode using which you can set the desired configuration to daily OR any day of the week.

c) Timer : Timer function allows you to set “day-hour-minute” using which you can schedule the device to Turn ON/OFF

ALEXA SETTINGS

Step 1: Install the Amazon Alexa app via the App Store (iOS) or the Play Store (Android) and register. If you already have an existing account with Amazon Alexa, please proceed to logging in.

Step 2: Once you are on the Amazon Alexa home page, tap on the lower right icon — where the arrow is pointed — to add a new device and Enable Skills.

Step 3: On the Home page of Amazon Alexa App, Tap on the icon as shown on the image below.

Step 4: Tap on “Skills & Games” as show below

Step 5: On the Search bar as shown type “V-TAC Smart Home” and tap on the V-TAC Smart Home skill as shown on the below image.

Step 6: Tap on “ENABLE TO USE” to link V-TAC Smart Home skill with Amazon Alexa app.

Step 7: Enter Login credentials of V-TAC Smart Home and then tap on Log In. If you do not have a existing account please register by tapping on the register.

Step 8: a)Once you have successfully linked V-TAC skill close the window & (b)tap on Discover device. Make sure Smart device is paired with V-TAC Smart Home app.

Step 9: Discover your smart device on Alexa. Once you have enabled the skill
A) You can use voice command “Alexa discover devices” to the Alexa device which you have.
B) To add device manually on home page tap on  and tap on Add device, select the device which you are adding and tap on discover device. (Ref Image B)

Note: Discovering the device must be done every time the device’s name is changed on the app.

ALEXA Commands

Now, you can control your smart device using voice commands on Alexa. Below are few example commands on how to use Alexa device:

➢! Alexa, turn ON Smart Plug
➢! Alexa, turn OFF Smart Plug

THINGS TO REMEMBER BEFORE STARTING INSTALLATION:

1. V-TAC Smart Home App & Amazon Alexa App
2. Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
3. Smart Home Device
4. Stable Wifi network

GOOGLE HOME SETI’INGS

Step 1.
a &b) Install the Google Home app via the App Store (i0S) or the Play Store (Android) and register. If you already have an existing account with Google Home, please proceed to logging in.
c) Create a New Home/choose from the existing home if any.
d) Power ON the Google Home device and connect it to the App. (Then Proceed to step 2)

Step 2: Once you are on the Google home page, tap on the Add “+” icon – to add a new device and skill. And then tap on set up device as shown in below image.

Step 3: Make sure the Smart device is paired with V-TAC Smart Home app before starting step 3. Tap on the arrow section as highlighted in the below image.

Step 4: Type “Vtac” on the search bar and tap on V-TAC Smart Home icon from the drop down options as shown below.

Step 5: Sign In with your V-TAC Smart Home Login credentials to Link the Smart Home device

Step 6:
a. Account will now be linked, please stay on the page you will be redirected in few seconds to select the device to add to your home.
b. Select the device and tap on Next as show in image(b)

Step 7: Select the Home where you would like to add the Smart Device under. (Or) you can create a New home in order to add the Smart Device to it.

Step 8: You have successfully added V-TAC Smart device to your Google home App.

Step 9: You can turn the device On/OFF by taping On/Off options as shown below. (OR) You can tap on the name(Ex:Smart Plug as shown below) to redirect to new page.

Google Commands:

Now, you can control your smart device using voice commands on Google Home. Below are a few example voice commands on how to use Google Home device:

➢! OK Google, turn ON Smart Plug
➢! OK Google, turn OFF Smart Plug

THINGS TO REMEMBER BEFORE STARTING INSTALLATION:

1. V-TAC Smart Home App & Google Home App
2. Make sure you have Google Home Device
3. Smart Home Device
4. Stable Wifi network

In case of any query/issue with the product please reach out to us atsupport@vtacexports.com
V-TAC EUROPE LTD, Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B

Documents / Resources

| V-TAC VT-5007 Wifi Lamp Holder [pdf] Datasheet
VT-5007, 8421, VT-5007 Wifi Lamp Holder, VT-5007, Wifi Lamp Holder, Lamp Holder, Holder
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>