IZZY IZ-9043 Ceiling Fan Instruction Manual
- September 9, 2024
- Izzy
Table of Contents
IZZY IZ-9043 Ceiling Fan
Product Information
Specifications:
- Brand: IZZY
- Model: Nickel IZ-9043
- Power Supply: AC 220~240V, 50/60Hz, 65W LED
Product Usage Instructions
Safety Interlocks:
Before using the appliance, read the instructions carefully and keep them
for future reference. Non-compliance with the instructions absolves IZZY from
any liability.
Fan Installation:
Electrical connections should be done by a qualified electrician following
European rules. The fan blades should be at least 2.3 meters from the floor
and 76cm from walls or obstacles. Ensure power is off before installation.
Fan Accessories:
- Screws and washers for fixing blades to the motor
- Screws for concrete ceiling
- Screws and washers for wood joist ceiling
- Base support components
Remote Control Connection:
Follow the remote control setup instructions for fan operation.
Remote Control Functions:
- On button
- Light button
- Speed control buttons
- Press to turn off the fan
- Timer buttons
- NATURE function button
- Button to change blade rotation direction
- Safety function button
- Auto-off button after 5 minutes
- Mute button
Summer / Winter Function:
In winter mode, the fan moves clockwise to evenly distribute warm air
downwards. Use in parallel with heating systems for efficient heating and
energy savings.
FAQ
-
Q: How do I install the fan blades?
A: Use the supplied screws and washers to fix the blades to the motor according to the instructions. -
Q: Can I leave the fan on when I’m not at home?
A: It is recommended not to leave the appliance in operation when you are not at home for safety reasons.
Thank you for having chosen an appliance from the IZZY range.
Safety interlocks
Please read these instructions carefully before using the appliance and save them for future reference. Please keep the sales receipt for guarantee purposes (pls see below “Guarantee and Customer Service”) Any use that does not conform to the instructions will absolve IZZY from any liability.
-
Make sure your electricity supply is the same as the one shown on the underside of the appliance.
-
The fan must not be plugged into a normal socket. Install only on the ceiling.
ATTENTION: The electrical connections must be made by a qualified electrician and by the European rules for electrical installations. -
Before turning on the fan, check all connections to avoid falling and injury.
-
You need to be very careful when you are close to the fan blades.
-
Never leave the appliance unattended when operating.
Note: Never leave the appliance in operation when you are not at home. -
Close supervision is necessary when your appliance is being used near children or infirm persons. Ensure that they do not play with the appliance.
-
This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, children or those with a lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
WARNING: Do not expose babies and the elderly many hours in front of the fan’s air.
-
Switch off and unplug:
- When not in use.
- When you move it.
- Before cleaning.
-
Never use the appliance for any other use than indicated.
-
The device is intended for indoor use. Do not use the device outdoors.
-
The device is intended only for domestic use. Any other use will cancel the warranty.
-
Do not operate or place the device or parts in places of high humidity or where it may get wet.
-
Do not use this appliance in the immediate surroundings of a bath, a shower or a swimming pool or in places where it may get wet.
-
The connection of the fan to the power supply must not get wet.
-
Leave enough free space around the device so as not to block the fan movement.
-
Do not use the appliance after a fall or if it is damaged and contact one of the authorized BENRUBI repair centers.
-
In case you notice some strange noise, smell, smoke or anything unusual, do not use the appliance. Disconnect it from electricity and contact an authorized BENRUBI Service Center.
-
Failure to use properly may cause injury.
-
Never use highly corrosive or abstractive cleaning agents. Never use metal scouring pads for cleaning.
-
Do not move the appliance when it is in operation.
-
Do not touch the appliance with wet or damp hands.
-
This appliance is not intended to be operated by means of an external timer or separate remote control system.
-
To reduce the risk of electric shock and fire, do not use this fan with any solid state fan speed control device or dimmer.
-
The important safety precautions and instructions in the manual do not cover all possible conditions that may arise.
-
Check the power cord periodically for possible damages.
-
If the power cord or the plug of the appliance has been damaged, do not use the appliance and contact an authorized BENRUBI Service Center.
-
In case of possible damage, do not attempt to repair the appliance by yourself. Please contact one of the authorized BENRUBI service centers.
-
Any repair made by an unauthorized BENRUBI Service Center CANCELS THE GUARANTEE.
-
Any misuse of the device cancels the warranty.
-
Only use original spare parts
-
The appliance conforms to EU directive 2014/30/EU on Electromagnetic Compatibility, the 2014/35/ EU Low Voltage Directive, the2011/65/EU
Fan Installation
ATTENTION: The electrical connections must be made by a qualified electrician and in accordance with the European rules for electrical installations.
IMPORTANT: THE COMPANY HAS NO RESPONSIBILITY FOR THE INSTALLATION. THE
INSTALLATION IS THE EXCLUSIVE RESPONSIBILITY OF THE CUSTOMER.
CAUTION: The fan blades must be at least 2.3 meters from the floor and at
least 76cm from the wall or other obstacles. The network must be installed via
a flexible cable or with a pole switch with a contact opening distance of at
least 3mm.
CAUTION: Before installing the fan, be sure to turn off the power. Do not switch on the power supply until the fan is fully installed and ready for use.
Fan accessories:
Supplied mounting accessories:
- A. Screws and washers for fixing the blades to the motor.
- B. Screws for concrete ceiling
- C. Screws and washers for wood joist ceiling
- D. Base support components
Remote control connection:
Fan installation
Please follow the below steps to install the ceiling fan.
The important safety precautions and instructions in the manual do not cover all possible conditions that may arise.
Remote Control
- On button
- Light button
- Speed control buttons
- Speed 1 (low)
- Speed 2
- Speed 3
- Speed 4
- Speed 5
- Speed 6 (high)
- Press to turn off the fan
- Timer buttons:
- “1H” 1 hour
- “4H” 4 hours
- “8H” 8 hours
- NATURE function button:
- The fan will switch speeds automatically (1 4 6 5 3 2)
- button to change the rotation of the blades:
- Summer function: blades turn counterclockwise
- Winter function: blades turn clockwise
- Safety function button
- The fan will automatically turn on for 5 minutes every 2 hours.
- To cancel the security function, press any key keyΣημείωση:
- Auto off button after 5 minutes
- Mute button .
Note: Never leave the appliance in operation when you are not at home.
Notes: Insert 2xAAA batteries into the controller (batteries are not
included in the package).
ATTENTION: It is emphasized that extra care is required in addition to
the above instructions when operating the fan.
Summer / Winter Function
In winter mode, the ceiling fan moves in a clockwise direction, with the
result that the warm air collected at the upper level of the room is evenly
diffused downwards throughout the room.
Tip: you can use the winter operation of the fan in parallel with the
heating system you have (eg radiators) to achieve more efficient heating and
energy savings!
Care and Cleaning
Before cleaning, switch off the fan, turn off the power, and let it cool completely.
- Clean the unit using a soft cloth to wipe off any dust.
- Do not attempt to open the unit without a qualified electrician. Improper installation of the unit can be dangerous.
- Clean the appliance at least once a year.
Maintenance
- In case of possible damage, do not attempt to repair it yourself. Repairs should only be carried out by qualified electricians.
- Any repair by an unauthorized technician of the BENRUBI service centers CANCELED THE WARRANTY.
- Periodically check the cable for damage.
- Do not use the appliance if the power cord is damaged or has fallen or been damaged in any way. If you suspect that the device is damaged, contact an authorized BENRUBI repair center.
Technical Information
- Model: Ceiling fan with 5 blades Nickel ΙΖ 90 43
- Voltage: AC 220~240V
- Frequency: 50/60Hz
- Rated input: 65 W
- LED lamp: included
Important Information for Correct Disposal of the Product by EC Directive 2002/96/EC
At the end of its working life, the product must not be disposed of as urban
waste. It must be taken to a special local authority differentiated waste
collection center or to a dealer providing this service. Disposing of a
household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant savings in energy
and resources.
As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
Guarantee & Customer Service
- BENRUBI Company guarantees its products for any manufacturing defect or defective materials for two (2) years from the date of purchase or delivery by presenting a purchase receipt. If your product malfunctions or you find any defects, please revert to the retail location you have purchased it from or contact an authorized BENRUBI Service Centre. To find the nearest authorized BENRUBI Service Centre, visit our website www.benrubi.gr. It is in the discretion of BENRUBI Company to replace or repair the defective product.
- The warranty does not cover damages resulting from normal wear, breakage, scaling, improper installation or maintenance of the product, mishandling, abnormal working conditions, failure to implement the instructions, conversion or repair of the product by an unauthorized technician who does not belong to the BENRUBI Service Centers.
Also, the warranty does not cover the following indicative factors:
- Stains, discoloration or scratches.
- Burns due to exposure to heat or flame.
- Damage from thermal shock (sudden temperature change or change of voltage).
FOR MORE INFORMATION PLEASE CONTACT:
(NEW) H. BENRUBI & FILS SA
27 Aghiou Thoma str, GR15124 , Maroussi Athens ,
Tel. Customer Support: +30 210 6156400
e-mail: benrubisda@benrubi.gr
FOR FURTHER INFORMATION:
(NEW) H. BENRUBI & FILS S.A., 27 Aghiou Thoma str. GR 15124, Maroussi Athens
Tel: +302106156400
Fax: +302106199316, e
e-mail: benrubisda@benrubi.gr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>