QAZQA 96670 Emado SL 3 Burner Steel with Wood Industrial Spotlight Instruction Manual

QAZQA 96670 Emado SL 3 Burner Steel with Wood Industrial Spotlight

Product Information

• Product Name: Emado SL 3 Burned Steel with Wood 96670
• Overall Size: 440mm x 175mm

Product Specifications:

• Maximum Wattage: 3x 25W
• IP Rating: IP20 (Suitable for indoor use only, where direct contact with water is impossible)

Safety Instructions:

1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture should come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take into account the minimal separation distance from other objects and the required room around the fitting.
6. If in doubt, consult a professional, considering local installation requirements. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened, especially in the case of 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, using no solvents or abrasives. Avoid dampness on all electrical components.
9. Take into account all available technical information.
10. Dispose of the luminaire in an appropriate electrical waste staging area; do not dispose of it with normal domestic waste in a standard rubbish can.

Meaning of Symbols:

• For indoor use only, where direct contact with water is impossible
• IPXX: Indicates the level of water-proof and dust-proof
• Protection Class I: The fitting must be earthed
• Protection Class II: The fitting is double insulated and does not require earthing
• Protection Class III: The fitting is low voltage
• 0.5m: Minimum distance from lighted objects (in meters)
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
• 220-240V~: The armature is designed to work only with the indicated voltage. Different items require different working voltages.
• The luminaire can be used in combination with a dimmer.
• The luminaire can be dimmed by a wall switch.

Wire Connection Symbols: FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands

www.qazqa.nl

Product Usage Instructions

1. Before installing or using the product, carefully study the instruction manual and the provided information.
2. Ensure that the product is installed by authorized and qualified technicians who adhere to the valid regulations for electrical installation.
3. Maintenance should be limited to the surfaces of the luminaires. Avoid any moisture coming into contact with terminal connections or voltage control parts during maintenance.
4. Prior to any installation, maintenance, or repair work, switch off the electrical supply, preferably using a switch in the distribution box.
5. Avoid installing exterior lighting during rain.
6. Take into account the minimal separation distance from other objects and the required room around the fitting.
7. If you are unsure, consult a professional, considering local installation requirements. Some countries may require lighting to be installed only by registered installers.
8. Ensure clamping screws in electrical connections are adequately tightened, especially for 12V low voltage conductors.
9. Clean the product with a clean, dry cloth or brush. Do not use solvents or abrasives. Avoid dampness on all electrical components.
10. Consider all available technical information related to the product.
11. Dispose of the luminaire in an appropriate electrical waste staging area. Do not dispose of it with normal domestic waste in a standard rubbish can.

INSTALLATION

Overall size

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.

Meaning of symbols:

• For indoor use only, where direct contact with water is impossible
• This icon indicates the level of water-proof and dust-proof
• Protection Class I: the fitting must be earthed
• Protection Class II: the fitting is doubled insulated and does not require earthing
• Protection Class III: the fitting is low voltage
• Minimum distance from lighted objects (meters)
• The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
• The armature is designed to work only with the indicated voltage. Different items require different working voltages.
• The luminaire can be used in combination with a dimmer
• The luminaire can be dimmed by wall switch
• The reference light angle and light space of the luminaire
• This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste

Take note of the symbols when connecting wires:

• Live conductor
• Earth conductor
• Neutral conductor

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands www.qazqa.nl

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>