XTREME XLP7-1008-BLK LED Desk Lamp Instruction Manual
- September 8, 2024
- Xtreme
Table of Contents
XLP7-1008-BLK LED Desk Lamp
Specifications:
- Product: LED Desk Lamp
- Item Number: XLP7-1008-BLK
- Contact: 855-999-8041 | www.xtremecables.com
- Version: V1.0 0823
Product Information:
Thank you for choosing our 5 in 1 LED Desk Lamp. This versatile
lamp combines the functionality of a lighting solution with
convenient wireless charging capabilities for Qi-compatible
devices. The foldable hinge and USB-A and USB-C watch charging
ports facilitate convenient Apple Watch charging. This user manual
will guide you through the setup process and provide instructions
for optimal usage of the LED Lamp.
Features:
- Wireless charging for Qi-compatible devices
- USB-A and USB-C watch charging ports
- Foldable hinge for adjustable height
- Clock and alarm setting capabilities
- Apple watch charger holder
Product Usage Instructions:
Installation:
-
Unpack the lamp from its packaging.
-
Adjust the hinges to achieve your desired height.
-
Connect the lamp to a power source using the included
cable. -
Use the supplied or equivalent 3A USB-C power cable for optimal
performance.
Operation:
Clock Setting:
-
To set the hour: Press and hold the Clock button until the hour
digits start flashing. Use the Clock button to adjust the hour
setting. -
To set the minutes: Press and hold the Clock button until the
minute digits start flashing. Use the Clock button to adjust the
minute setting.
Alarm Setting:
-
To set the alarm hour: Press and hold the Alarm button until
the hour digits start flashing. Use the Alarm button to adjust the
hour setting. -
To set the alarm minutes: Press and hold the Alarm button until
the minute digits start flashing. Use the Alarm button to adjust
the minute setting.
To Turn Off/On the Display: Press the clock and
alarm keys simultaneously to turn off the clock display. Press
either key shortly to reactivate the display.
Wireless Charging:
Place Qi-compatible devices on the charging symbols in either
portrait or landscape orientation for wireless charging.
Watch Charger Set Up:
-
Unfold the upper back hinge to reveal the smart watch charging
holder. -
Place your Apple Watch charging puck (not included) on the
holder to charge your Apple Watch.
FAQ:
Q: Is the Apple Watch charging puck included with the
lamp?
A: No, the Apple Watch charging puck is not
included with the lamp. You need to use your own Apple Watch
charging puck for this feature.
Q: How do I know if my device is Qi-compatible for
wireless charging?
A: Most modern smartphones are Qi-compatible.
You can also check your device’s specifications or contact the
manufacturer to confirm Qi compatibility.
LED DESK LAMP
WITH WIRELESS CHARGING FOR SMARTPHONES AND STANDS FOR APPLE WATCH® AND
AIRPODS®
Item Number: XLP7-1008-BLK
855-999-8041 | WWW.XTREMECABLES.COM
V1.0 0823
INTRODUCTION
Thank you for choosing our 5 in 1 LED Desk Lamp. This versatile lamp combines
the functionality of a lighting solution with convenient wireless charging
capabilities for Qi-compatible devices. The foldable hinge and USB-A and USB-C
watch charging ports facilitate convenient Apple Watch charging. This user
manual will guide you through the setup process and provide instructions for
optimal usage of the LED Lamp.
FEATURES
· Qi-Compatible wireless charging · Multiwhite light settings · Clock display
· Alarm · USB-C and USB-A smart watch charging ports · Wireless phone charging
stand · AirPods stand · Apple Watch charger holder
WIRELESS CHARGING CAUTIONS AND TIPS
· To prevent damage to the phone or the charger: · Remove metal cases, or
cases with any magnet/metal components, from phone before charging. · Do not
place metal objects on the charger during charging · Qi wireless chargeable
phones with metallic finishes will charge normally.
· Very thick phone cases can obstruct wireless charging. For effective
charging, it may be necessary to reposition the phone or remove the case.
· Consider tuning off your phones vibrating notifications during charging, as
vibrations may cause your phone to shift position on the charger and stop
charging.
· For 15W phone charging: to ensure charging of some fully discharged 15W
phones you may need to power off the LED light for some time if the phone will
not remain charging.
GETTING TO KNOW YOUR 5 IN 1 DESK LAMP
Hinges Folded
Hinges Unfolded
Apple Watch® Charger Holder
Airpods® Stand
USB-C Power Input
INSTALLATION
1 USB-C + 1 USB Port In A Cable Storage Compartment
for Watch Charging
· Carefully remove the LED Lamp and its accessories from the
packaging.
· Unfold the lamp by extending the lamp arm and adjusting it to
your desired height.
· Connect the lamp to a 20W Power Adapter (not included) using
the included cable.
· To ensure proper operation, only use a 20W USB PD adapter and
the supplied or equivalent 3A USB-C power cable.
OPERATION
Lighting · To active the light: tap the Power button. The initial setting is
cool white light at 50% brightness. · To change the light modes: When the
light is on, tap the Power
button to change the light mode between cool white light, warm white light,
and white light combination. · To change the brightness level, tap and hold
the Power button, the brightness with increase until it becomes 100%. Remove
your finger and tap and hold again to decrease the light level until it
becomes 10%. Note: If you do not change for 5 seconds, the last setting will
be automatically saved.
CLOCK SETTING 1. To set the hour: Press and hold the Clock button, that is
located
to the left of the power key, until the hour digits start flashing. 2.
Repeatedly tap the Clock button to change the hour digits. Stop
tapping when you reach the desired hour setting and wait for the hour digits
to stop flashing. The hour is now set. 3. To set the minutes: Press and hold
the Clock button until the hour digits start flashing, lift your finger and
press again until the minute digits start flashing. 4. Repeatedly tap the
Clock button to change the minute digits. Stop taping when you reach the
desired minute setting and wait for the minute digits to stop flashing. The
minutes are now set.
ALARM SETTING 1. To set the hour: Press and hold the Alarm button, that is
located
to the right of the power key, until the hour digits start flashing. 2.
Repeatedly tap the Alarm button to change the hour digits. Stop
taping when you reach the desired hour setting and wait for the hour digits to
stop flashing. The hour is now set. 3. To set the minutes: Press and hold the
Alarm button until the hour digits start flashing, lift your finger and press
again until the minute digits start flashing. 4. Repeatedly tap the Alarm
button to change the minute digits. Stop taping when you reach the desired
minute setting and wait for the minute digits to stop flashing. The minutes
are now set.
· When the alarm is set, the alarm icon will be displayed on the lower right
side of the display.
· To check the alarm time setting, tap the alarm button. The alarm set time
will be displayed for a few seconds before the display reverts to the clock
time.
· To deactivate a sounding alarm, press the alarm button once. The alarm will
stop sounding.
· To cancel the alarm setting, tap the alarm button three times. When the
alarm setting is canceled, the alarm icon will no longer be displayed.
TO TURN OFF/ON THE DISPLAY Press the clock and alarm key at the same time to
turn off the clock display. Shortly press the clock key or the alarm key to
reactivate the clock display.
CHARGING PHONE WIRELESS CHARGING · With the lamp extended, place the phone
over the wireless
charging symbols, in the upright (portrait) or horizontal (landscape)
orientation. The phone will begin to charge.
EARPHONE CASE STAND · Place the earphones charging case on its holder ledge on
the
lower rear side of the lamp for easy access.
WATCH CHARGER SET UP The 5 in 1 Lamp is equipped with an Apple watch charger
holder where you can place your Apple watch charging puck (not included) to
charge your Apple watch. 1. Unfold the upper back hinge to reveal the smart
watch charging
holder. Open lower back panel door to expose the Smart Watch charging port
compartment. 2. Insert your watch charging puck’s cable (not supplied) through
the top back opening and thread it down to the charging compartment and plug
its USB plug into the matching USB charging port. 3. Pull down excess cable
into the compartment and close the lower back panel door. 4. Insert your watch
charger into the circular watch charger holder. 5. Place your watch securely
on the watch charger and the charging will start.
MAINTENANCE AND SAFETY INFORMATION
· Read all the instructions before using the product, and use the product as
intended.
· Disconnect the USB cable once the product is fully charged.
· Keep close supervision of this product if being used around children.
· Do not expose the product to rain or moisture, and do not use nearby water
such as swimming pools, bathtubs, or sinks.
· Do not expose the product to heat sources, the sun, or leave in a hot
vehicle.
· Do not place metal items on the surface of the product.
· Do not modify or try to use the product for a non-intended purpose.
· Do not cover the product with paper or other materials. Use in a well-
ventilated area when charging.
· Wireless chargers generate heat when charging, and the wireless charger may
temporarily stop charging if it gets too hot.
· Do not use if damaged or modified.
· Do not dissemble. There are no serviceable parts inside.
· Do not place magnetic strip cards or similar magnetically sensitive items
between the phone and the charger. Wireless charging uses magnetic induction
that could damage these items.
· Your phone will not charge wirelessly if it is connected to your computer’s
USB port, or if it’s connected to a USB power adapter or other USB charging
source.
· Do not use abrasive cleaning solvents to clean the unit.
· If you have a pacemaker or other such device, consult a physician before
using this product.
FCC COMPLIANCE PART 18:
This device complies with part 18 of the FCC Rules. Operation is Subject To
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures: · Reorient or relocate the receiving antenna. · Increase
the separation between the equipment and receiver. · Connect the equipment to
an outlet on a circuit different from
that to which the receiver is connected. · Consult the dealer or an
experienced radio/TV technician for help
Changes or modifications not explicitly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
ONE YEAR WARRANTY
Xtreme warrants its products for one year against defects in manufacturing
under regular consumer use with original receipt of retail purchase. We
believe in our products and want to provide you with a replacement, if needed,
but we have to know about the problem while the product is still under
warranty. If you discover a defect covered by this warranty, please contact us
about receiving a replacement. In order to use the products warranty the
customer must provide proof of the retailers receipt. *Any customers outside
of the U.S. will be responsible for shipping and handling charges if a
replacement is required that is not due to a manufacturing defect. If there is
not a manufacturing defect, shipping and handling will be applied. Xtreme’s
warranty is limited to our products only. Our warranty does not cover the
replacement or repair cost of any third-party accessory, electronic device or
personal property. For instructions about how to obtain warranty service for
your product, please contact Customer Service at
customerservice@xtremecables.com
WHAT’S INSIDE: 5 in 1 Wireless Charging LED Desk Lamp 4ft TypeC Power Cable
User Manual
SPECIFICATIONS: Input: 9V/2A LED Power: 5W USBC + USB Output: for Smart Watch
Charging Wireless Charger Output: 5W7.5W10W15W