XTREME POWER XBE90136 True Wireless Stereo Earbuds User Manual
- May 15, 2024
- XTREME POWER
Table of Contents
- XTREME POWER XBE90136 True Wireless Stereo Earbuds
- INTRODUCTION
- SPECIFICATIONS
- WHAT’S INSIDE
- FEATURES
- GETTING TO KNOW YOUR PRODUCT RIGHT EARBUD
- SMART TOUCH CONTROLLED EARBUDS
- WEARING YOUR EARBUDS
- CHARGING THE CHARGING CASE
- BATTERY LOW WARNING
- CHARGING THE EAR BUDS
- POWERING THE EARBUDS ON/OFF
- BLUETOOTH PAIRING
- CALL MODE
- VOICE ASSISTANT MODE
- MUSIC MODE
- TROUBLESHOOTING
- TIPS
- SAFETY AND CARE INSTRUCTIONS
- FCC STATEMENT
- FCC RADIATION EXPOSURE STATEMENT
- ONE-YEAR LIMITED WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XTREME POWER XBE90136 True Wireless Stereo Earbuds
INTRODUCTION
Thank you for your purchasing of the True Wireless LED Earbuds & Charging Case. This unit is perfect for hands-free calling, and music.
SPECIFICATIONS
- Power input:SV /1 A
- Charging time(earbuds):1.5 hours
- Charging time(Charging case): 2.0 Hours Playtime(Earbuds): 5 Hours
- Playtime(with Charging case):16 Hours
- Battery type: Earbuds 30MAh, charging Case SOOMAh
WHAT’S INSIDE
- LED Earbuds
- interchangeable Earbuds Tips (S, M, L)
- Charging Case
- USB-C Cable
- User Manual
FEATURES
True wireless Bluetooth 5.3® stereo earbuds and pocket-sized RGB charging case with LED indicator
- Touch control on earbuds for play/pause & answering phone calls
- Earphones can be used as a single-use earbuds or as a pair
- Wirelessly recharge your earbuds with included charging case
- Portable and lightweight
GETTING TO KNOW YOUR PRODUCT RIGHT EARBUD
SMART TOUCH CONTROLLED EARBUDS
Function sensor allows turn on/off, play & pause your music answer/end calls, and use voice prompt with one simple touch.
WEARING YOUR EARBUDS
- Secure earbud tips on earbud.
- Secure earbuds in ear.
CHARGING THE CHARGING CASE
Insert the included USB-C cable to your charging source. When charging starts the last digit of the battery below 100% flashes & the LED lights go on for 30 seconds.
- Charging: The last digit of the battery below 100% flashes
- Fully charged: The charging case power indicator will read 100%
Note: When not in use the device will automatically shut down after 5 minutes.
BATTERY LOW WARNING
When battery is low, the charging case will slowly blink green every 30 seconds and the charging case power indicator will show the exact percentage of charge.
CHARGING THE EAR BUDS
Simply place your earbuds in the correct position in the charging case to start recharging. When charging, the charging case LEDs will light up in addition to green lights from the ear buds as well.
POWERING THE EARBUDS ON/OFF
Your earbuds will power on automatically when picked up from the charging case, no manual touch needed.
BLUETOOTH PAIRING
When the earbuds are picked up from the charging case, it is instantly in pairing mode. Search for “Xtreme XBE9-0l 36” on intended Bluetooth device. When successfully connected, you will here a sound.
CALL MODE
VOICE ASSISTANT MODE
MUSIC MODE
TROUBLESHOOTING
If you are unable to connect your earbuds to your bluetooth device, please try the following steps:
- Ensure your earbuds are turned on and fully charged
- Make sure your bluetooth setting is on
- Restart your bluetooth device
TIPS
- Turn off your earbuds before placing it in your pocket or bag, if the MFB is accidently activated, you may place an unintended call
- Performance can be affected by the environment
- Interruption can be caused by obstacles between the earphones and the Bluetooth device, by wi-fi or other high frequency signals, or if the earphones are brought out of range of the Bluetooth device (approx. 33 ft)
- To maintain healthy battery performance, charge the charging case (and earphones) periodically, if not in use
- Once turned off, only way to turn on is to place and displace earbuds from the charging case’
- When only using 1 earbud, call mode functions are disabled
SAFETY AND CARE INSTRUCTIONS
This product contains a non-replaceable rechargeable lithium-ion battery. When discarding, follow your local/state guidelines.
- Do not use abrasive cleaning solvents to clean the unit.
- Disconnect the USB cable once the product is fully charged.
- Do not expose to heat sources or leave in a location that is likely to get excessively hot.
- Do not let the product get wet.
- Do not disassemble.
- Performance can be affected by the environment or when the product becomes discharged.
- Interruption can be caused by obstacles between the product and the Bluetooth device, by Wi-Fi or other high frequency signals, I or If the product is brought out of range of the Bluetooth device.
- Charge fully before storing for a long period. Note: Lithium-ion batteries will self-discharge over time.
To ensure battery life, do not store the product in an uncharged state for a length of time. If left in a discharged state for too long a lithium-ion battery will no longer have the ability to be recharged.
FCC STATEMENT
Any changes or modifications not expressly approved by the part responsible
for compliance could void this user’s authority to operate the equipment. This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. I These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
ONE-YEAR LIMITED WARRANTY
Xtreme warrants its products for one year against defects in manufacturing
under regular consumer use with the original receipt of retail purchase. We
believe in our products and want to provide you with a replacement if needed,
but we have to know about the problem while the product is still under
warranty. If you discover a defect covered by this warranty, please contact us
about receivinga replacement. In order to use the product’s warranty the
customer must provide proof of the retailer’s receipt. * Any customers outside
of the U.S. will be responsible for shipping and handling charges if a
replacement is required that is not due to a manufacturing defect. If there is
not a manufacturing defect, shipping and handling will be applied.
Xtreme’s warranty is limited to our products only. Our warranty does not cover
the replacement or repair cost of any third-party accessory, electronic device
or personal property.
For instructions about how to obtain warranty service for your product, please
contact Customer Service:
customerservice@xtremecables.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>