XTREME XWS7-2002-BLK Smart WiFi Outdoor Plug User Manual
- June 4, 2024
- Xtreme
Table of Contents
XWS7-2002-BLK Smart WiFi Outdoor Plug
User Manual
GETTING STARTED
Thank you for choosing the Xtreme Connected Home Smart Outdoor Plug. This
quick start guide will help you with setup and installation.
Package Includes:
- Smart Outdoor Plug
- Quick Start Guide
What You Need:
**** Before setup. make sure your phone Is connected to the 2.46Hz WI network that your device will be placed on. You may also need to turn on location and Bluetooth to find nearby networks.
CONNECT THE DEVICE
STEP 1
Download the free Xtreme’s Connected Home app from the AppStore (for iPhones)
or Google Play Store (for Android phones).
STEP 2
Make sure your mobile device is connected to your 2.46Hz WiFi network.
Open the app and click “Register? by following the on-screen instructions.
After your Initial Sign In. your app will remember your password and log you
in automatically.
You can also choose to manually log out under Settings In the Main menu.
** You may need to check your Spam folder for the verification code
STEP 3**
Plug the Smart Outdoor Plug into a wall outlet.
Note: The indicator tight on the plug should 6– start blinking rapidly
(about 4 times per second) for EZ pairing mode.
| LED Behavior | Device Status |
|---|---|
| Flashing Rapidly | EZ Pairing |
| Flashing Slowly | AP Pairing |
Button Operation
Single Click| On/Off
Hold for 5 Seconds| Enter/Clyde through Pairing Modes
STEP 4
Make sure your Bluetooth® is enabled.
After logging in. ‘ on the top right of the screen and ‘Add device’.
The app will detect the WIFI+1311 enabled device and ask you if you want to add It
Make sure the check is marked next to the device you want to add, click the + button
Make sure your 2.46Hz network is selected. input the password and press confirm
NOTE: Once successful then go directly to Step 7. If the app does not detect your device, skip this Daft and proceed to Step 5.
STEP 5
Select the Outdoor Plugs category and confirm that the indicator light Is
still rapidly blinking.
Click “Confirm Indicator rapidly blink”.
Help: Switch between pairing modes. See troubleshooting page 12.
STEP 6
Confirm that the displayed WiFi network is your 2.4GHz WiFi network. r your
WiFi password and “Next”
Help: If you need information about 2.46Hz WA networks, click the lit to go to our Connect FAQs on our website.
FCC STATEMENT
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>