SILVERSTONE RM41-506 5.25 Inch Rackmount Server Chassis Instruction Manual
- September 7, 2024
- SilverStone
Table of Contents
RM41-506 5.25 Inch Rackmount Server Chassis
“`html
Specifications:
- Model: RM41-506
- Type: 4U 6-bay 5.25 rackmount server chassis
- Front Panel:
- POWER ON SWITCH
- SYSTEM RESET SWITCH
- USB 3.1 Gen1 x 2 ports
- POWER ON LED (BLUE)
- HDD ACTIVITY LED (GREEN)
- LAN1 LED (GREEN)
- LAN2 LED (GREEN)
Product Usage Instructions:
Slim ODD Cage Assembly:
1. Remove the slim ODD blank cover by loosening 2 screws.
Drive Cage Removal:
1. Loosen 2 screws and lift off the drive cage.
2. Once the hard drive is assembled, secure the drive cage back
with the same 2 screws.
Top Cover Removal:
1. Release 2 screws of the top cover on each side.
2. Push the top cover backward about 1 inch and lift it off the
chassis.
Cooling Fan Installation:
Optional 8cm fans can be placed on the rear plate of the
chassis.
Slim ODD Assembly:
1. Fix the slim ODD bracket with the slim ODD using 2
screws.
2. Insert and secure the slim ODD assembly into the drive bay
with 1 screw.
Cooling Fan Assembly:
Fix an 80 x 25mm fan with 4 screws.
3.5 HDD Assembly:
1. Place the HDD in the drive bay.
2. Secure the HDD with screws (4 pcs – 6#32 x 6mm).
2.5 Drive Cage Assembly:
The slim ODD drive cage can be used as a 2.5 drive cage
alternatively.
1. Insert the 2.5 device into the drive bay.
2. Secure the device with 4 screws on the top.
FAQ:
Q: What is the warranty information for this product?
A: This product has a limited 1-year warranty in North America
and Australia. For information on warranty periods in other
regions, please contact your reseller or SilverStone authorized
distributor. For detailed warranty terms & conditions, visit
SilverStone Technology’s
website.
“`
Front panel IO and indicators
RM41-506
4U 6-bay 5.25″ rackmount server chassis
1 POWER ON SWITCH 2 SYSTEM RESET SWITCH 3 USB 3.1 Gen1 x 2 ports 4 POWER ON LED (BLUE)
5 HDD ACTIVITY (GREEN) 6 LAN1 LED (GREEN) 7 LAN2 LED (GREEN)
1
4
3
5
1
6
2
3 2
4
5
8
6
7
7
8
WWW.SILVERSTONETEK.COM
9 9
Slim ODD cage assembly
4bays-3.5″ HDD cage and cooling fan assembly
Remove the slim ODD blank cover
Loose 2-screws and remove the blank cover
How to remove the drive cage
1. Loose 2 screw and lift off the drive cage 2. Once hard drive assembled,
secure the drive
cage back with the same 2-screws
Removing the top cover
1. Release 2-screws of the top cover on each side 2. Push the top cover
backward about 1″ and lift it off the chassis
Cooling fan
Optional 8cm fans
Place the 80 x 25mm fan to the rear plate of chassis
Slim ODD assembly
1. Fix the slim ODD bracket with slim ODD with 2 pcs screws
2. Insert and secure the slim ODD assembly into the drive bay with 1-screw
Optional cooling fan assembly
Fix 80 x 25mm fan with 4-screws
3.5″ HDD assembly
1. Place the HDD in the drive bay 2. Secure HDD with screws (4 pcs – 6#32 x
6mm)
2.5″ Drive cage assembly
The slim ODD drive cage can be used as a 2.5″ drive cage alternatively
1. Insert the 2.5″ device into the drive bay 2. Secure the device with 4 pcs
screws on the top
The 2.5″ drive bay undemeath 3 bays-5.25″ drive
1. Remove the 3bays-5.25″ drive cage from the chassis as the previous step
illustrated 2. Insert the 2.5″ device into the 2.5″ bay 3. Secure the device
with 4 pcs screws on two sides
3bays-5.25″ drive cage assembly
How to remove the drive cage
1. Loose 2-screws on the chassis side 2. Loose 2-screws on the top and lift
off the drive cage 3. Once devices assembled, secure the drive cage
back with the same 4-screws
5.25″ devices assembly
1. Place the 5.25″ devices into drive cage 2. Secure with screws (4 pcs-M3 X
5mm
screws for each bay)
Remove the dummy covers
Loose screws of each bay’s sides
PSU Assembly
1.ATX PSU Installation
Install the PSU to the PSU mount inside the chassis
Secure with four screws Secure with 4 screws
3.2U Redundant PSU installation
Remove the ATX PSU bracket pre-installed on the PSU mount, then install the 2U
Redundant PSU to the PSU mount
Secure with 4 screws
Warranty Information
This product has a limited 1 year warranty in North America and Australia. For
information on warranty periods in other regions, please contact your reseller
or SilverStone authorized distributor. https://silverstonetek.com.cn/
Warranty terms & conditions
1. Product component defects or damages resulted from defective production is
covered under warranty. Defects or damages with the following conditions will
be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no
misuse, overuse, or other inappropriate actions. b) Damage not caused by
natural disaster (thunder, fire, earthquake, flood, salt, wind, insect,
animals, etc…) c) Product is not disassembled, modified, or fixed. Components
not disassembled or replaced. d) Warranty mark/stickers are not removed or
broken. Loss or damages resulted from conditions other than ones listed above
are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to
the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible
for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace
its defective products. Under no circumstances will SilverStone Technology be
liable for damages in connection with the sale, purchase, or use including but
not limited to loss of data, loss of business, loss of profits, loss of use of
the product or incidental or consequential damage whether or not foreseeable
and whether or not based on breach of warranty, contract or negligence, even
if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone
distributors and resellers and is not transferable to a second hand purchaser.
5. You must provide sales receipt or invoice with clear indication of
purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your
retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com. Please note that: (i) You must provide proof of
original purchase of the product by a dated itemized receipt; (ii) You shall
bear the cost of shipping (or otherwise transporting) the product to
SilverStone authorized distributors. SilverStone authorized distributors will
bear the cost of shipping (or otherwise transporting) the product back to you
after completing the warranty service; (iii) Before you send the product, you
must be issued a Return Merchandise Authorization (“RMA”) number from
SilverStone. Updated warranty information will be posted on SilverStone’s
official website. Please visit http://www.silverstonetek.com for the latest
updates.
2.Mini Redundant PSU Installation
Secure the screws at the end of the 2U Redundant PSU
Remove the ATX PSU bracket pre-installed on the PSU mount Place and secure the ventilation cover above the power supply
Install the Mini Redundant PSU and secure with 4 screws at the rear of the chassis
When installing a 2U Redundant PSU, remove the original bracket at the rear and replace with the extended bracket
Additional info & contacts
For North America (usasupport@silverstonetek.com) SilverStone Technology in
North America may repair or replace defective product with refurbished product
that is not new but has been functionally tested. Replacement product will be
warranted for remainder of the warranty period or thirty days, whichever is
longer. All products should be sent back to the place of purchase if it is
within 30 days of purchase, after 30 days, customers need to initiate RMA
procedure with SilverStone Technology in USA by first downloading the “USA RMA
form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only (support@silverstonetek.com) Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply)
For Europe (support.eu@silverstonetek.de) For China (support@silverstonetek.com.cn) For all other regions (support@silverstonetek.com)
(Pb)
×
×
(Hg)
(Cd)
/
(Cr(VI))
(PBB)
(PBDE)
×
×
SJ/T11364-2014 ×SJ/T11364-2014
× R o H S 2011/65/EU
G11237481
01