PISEN TP-C70 Mag Depot Qi2 Wireless Car Mount Charger User Manual
- September 6, 2024
- PISEN
Table of Contents
PISEN TP-C70 Mag Depot Qi2 Wireless Car Mount Charger
Important Information
We appreciate your purchase of Pisen Mag Depot Qi2 Wireless Car Mount Charger.
Please read these instructions carefully to ensure safe and smooth operation,
and keep this instructions properly for future reference.
This product is used for car mounts and charging devices that support the Qi
wireless charging protocol.
Technical Specifications
Pisen Mag Depot Qi2 Wireless Car Mount Charger
Product model| TP-C70
Dimensions| 64•6432mm (2. 52•2.521.26 in) (base not included)
Weight| Approx. 95g (3.35oz)
Input| Type-C:5V= 3A 9V=3A
Output| 15W MAX Power:5W/7.5W/l 5W
Working Temperature| o·c~35°C (32°F~95°F)
Transmission distance| 6mm (0.24in)
Packing List| Car Phone Holder1
Collet1
Guide Ring1
Charging Cable 1
User Manual*1
Note:
In order to ensure good conversion efficiency during charging, please
support the power adapter of PD/QC protocol when using. The magnetic function
is only available on the iPhone 12 and later Magsafe models, and other phones
need to be paired with a magnetic case.
Usage Step
- Fix the holder base to the air outlet of the air conditioner or other places where it can be fixed with clips.
- Loosen the fixing knob in the direction of “UNLOCK”, connect the support fixing chuck to the air outlet base, adjust the Angle and tighten the locking knob in the direction of “LOCK”
- Connect the Type-C charging cable to the Type-C port of the holder and the car charger.
- Put the phone on the charging panel of the stand, you can adsorb and fix it and charge it.
Indicator Light Description
State | Lamplight |
---|---|
Power on | Light up from left to right, and then the blue light is all on |
Standby Time | No light |
Charging | The red light keeps on |
Fully Charged | The blue light keeps on |
Malfunction | Blinking blue lamp |
Product Appearance Diagram
Note:
Please confirm whether your device supports Qi wireless charging before using
this product!
Matters Needing Attention
- When using this product. do not cover it with any items.
- Please do not expose this product to direct sunlight, humid environments for use or storage.
- Do not disassemble, modify, or repair this product by yourself.
- Do not put this product into fire, water, or other corrosive liquids.
- Suggest using with PISEN or other cables with relevant qualifications and certifications.
- Please do not plug, unplug or adjust the product during driving to prevent accidents.
- lf there are abnormal phenomena such as high temperature or no charging during use, please stop using immediately and contact after-sales service.
- Please keep away from children to avoid accidents.
- Unless supervised or guided by professionals, the following individuals (including children) are not suitable for using this product: those with physical or mental impairments, lack of awareness of this equipment, and lack of operating experience. It is essential to supervise children to ensure safe use.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
Customer Support
Design By Pisen Made in China
Manufactu r ed by: Guangdong PISEN Electronics Co., Ltd.
Address: Building 5, 1st Floor, No. 9, Qinfu 1st Street, Liuyue Nan
Community, Henggang Town, Longgang District, Shenzhen City, Guangdong
Province, China
The brand belongs to Guangdong PISEN Electronics Co., Ltd.
For FAQs and more help information,
please visit: https://en.pisengroup.com
Contact: support@pisengroup.com