auraLED 7358 ColorDuo/ColorStrip Remote Controlled Color Changing LED Light Bulbs with Light Strip User Guide
- June 7, 2024
- auraLED
Table of Contents
FRONT
The Ultimate Home Experience
ColorBulbs and ColorStrips work together, transforming your home atmosphere
with a personalized lighting experience. Operate the color, pattern, and
brightness settings of both via remote to create the perfect ambiance
anywhere.
PACKAGE CONTENTS
2 LED ColorBulbs
1 ColorStrip
1 Remote
COLORSTRIP INSTALLATION
NOTE: Please make sure that the back surface of your TV is clean from dust, oils, or fingerprints before attempting to apply your ColorStrip. Use an alcohol-based cleaning cloth to wipe the back of your TV.
-
Locate the USB port on the back of your TV. If your TV does not have a USB port, you may use any other USB power source.
-
Make sure that you are satisfied with the coverage area of the LED strip prior to peeling off the adhesive tape. Make sure that the USB cable is placed near the USB port and has enough slack to reach safely. The Remote Receiver must also be visible in order to work properly.
-
Peel off the backing of the strip to expose the adhesive.
-
Apply to the cleaned surface of the back of the TV. Press down for a couple of seconds to secure.
-
Connect the ColorStrip with the USB Cable and insert the cable into the USB port.
-
Open back of remote and insert 2 AAA batteries and close cover.
-
Press the ON button to turn on the ColorStrip.
-
Refer to the color combinations settings on the remote to customize your ColorStrip.
ASSEMBLY
See below for suggested placement depending on your TV size:
COLOR BULB INSTALLATION
- Screw into bulb socket, and the bulb will turn on.
- Use remote or app to control bulb.
Please note that the top of the bulb needs to be visible for the remote to control it, the AuraLED app will work even if the bulb is not visible.
INFRARED REMOTE CONTROL
- Power ON
- Power OFF
- Color Changing Ring: Touch a point on the Color Changing Ring to change color. (A Maximum of 15 Colors)
- Increase Brightness
- Decrease Brightness
- Increase the Speed at which the Light Colors Alternately Blink/Flash
- Decrease the Speed at which the Light Colors Alternately Blink/Flash
- Press “+” to select the Next Lighting Mode
- Press “-” to select the Previous Lighting Mode
Buttons 8 & 9 Lighting Mode Order: White-Flash-StrobeFade-Smooth.
SPECIFICATIONS
Infrared Remote Control Coverage area:
up to 20 feet (6m) max
ABOUT THE AURA LED APP
- Allows you to choose from a wide range of colors.
- Enables you to save default settings such as favorite colors and illumination patterns.
- Enables you to match the rhythm of any of your own music.
- Can also sync LED illumination with your voice, in the app’s microphone voice detection feature.
- Lets you set custom light-activated alarms and sync them to your schedule and lifestyle.
USING YOUR COLOR BULBS & COLOR STRIP
- Download the free AURA LED App from the App Store or Google Play Store. You may also scan the QR code below
to download.
|
---|---
2. Make sure your Illumalight is plugged into a power supply via the USB charging cable.
3. Open the app in your device. Tap to select the menu in the upper-left corner of your screen.
4. Select your preferred LED color/pattern from the menu of options. Tap the link icon to connect or disconnect a specific LED light (if you have paired multiple units to your device).
5. Use the navigation buttons found at the bottom of the screen to manually adjust your colors, illumination style/pattern, and perform all light controls.
Pay attention to the brightness intensity level as you adjust. The LED display will blink white when it reaches the maximum brightness level.
COLORSTRIP SPECIFICATIONS
Input: DC 5V/0.5A 2A;
Power Consumption: 2.5W -10W
LED Chip: 5050, RGB
Color: 16 colors with 4 ColorStrip settings
Beam Angle: 120 degrees
LED Strip: 30 LED lights / 6.5 foot ( 78”)
Back Adhesive: 3M self adhesive
Working Temperature: -20°C – 45°C
Working Humidity: 0% – 80% RH Usage: 40,000 hours ~
COLORBULB SPECIFICATIONS
Working Voltage: AC 100-220V
Working Frequency: 50/60HZ
Highest Power: 5W
Operating Temperature: -20°C – -60°C ~
Working Humidity: 10% – 90% RH
Usage: 40,000 hours
Coverage: The infrared light receiving effect is within 20 feet, and the
Bluetooth receiving is 50-98 feet. Remote controller: 20 ft/6m (max) 2 AAA
batteries (not included)
IMPORTANT SAFEGUARDS
- Keep ColorStrip away from flammable objects.
- Always make sure that all parts have been connected properly to avoid short circuits.
- Check to make sure the voltage of the power source (USB) is 5V.
- Do not connect the ColorStrip to the power source until all of the installations have been completed.
- Do not cut any part of the ColorStrip or its connectors.
- Always make sure that the Remote Receiver is not covered or blocked. This will ensure proper operation using the remote control.
- If this product malfunctions, please do not try to repair it yourself, take it to a qualified electrician.
tzumi® auraLED™. Distributed by Izumi inc. NY, NY, 10016. ©Copyright 2019 Izumi. All Rights Reserved. Made In China. Samsung and Galaxy S are both registered trademarks of Samsung Electronics Co., Ltd. All pictures showed are for illustration purposes only. The actual products may vary due to product enhancement. Other trademarks and trade names on this package are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>