MAGEASY MCG123030BK22 MagPad Kickstand Magnetic Wireless Charger User Guide
- June 5, 2024
- MAGEASY
Table of Contents
MAGEASY MCG123030BK22 MagPad Kickstand Magnetic Wireless Charger User
Guide
PRODUCT DESCRIPTION
PRODUCT SPECIFICATIONS
Name： MagPad
Input： Kickstand
Magnetic Wirless Charge
Output： 5V⎓3A, 9V⎓2.22A
Dimensions： 15W Max (compatible
with 10W, 7.5W, 5W) 64 x 64 x 14 mm (2.5 x 2.5 x 0.55 inches)
Net Weight： 56 g (1.98 oz)
Power Cable Length： 1.5 m
USER GUIDE
Connect the MCG123030BK22 to the power source via the USB-C cable
- Please use the USB cable included in the MCG123030BK22 package to ensure the best charging efficiency.
- The MCG123030BK22 can be connected to USB-C-port-supported power sources.
- Please use any existing USB-C plugs that are suitable for power supply.
- The charging duration is affected by the phone battery capacity, phone (Rx) maximum charging rate per hour, the accuracy of the alignment between TX and RX, and the power provided by the source.
- A DC of at least 5V/3A is recommended for best charging efficiency.
- The LED indicator light was designed to be only visible under dark places to maintain the user experience.
- The indicator light will turn on when your power source is correctly connected to the MCG123030BK22 and vice versa when disconnected.
GENERAL PRECAUTIONS
- Please do not place any objects, such as coins, on top of the charger while charging.
- Please charge with a wireless charging compatible phone case or without phone case while charging.
- A phone case that is more than 3 mm in thickness may affect charging efficiency.
- When using the MCG123030BK22, please do not place too much weight over it or drop the device.
- Please do not attempt to repair the MCG123030BK22 wireless charger on your own by taking it apart.
- Please do not twist or squeeze the USB-C cable.
- If you need to change the USB cable, please make sure that the product meets the manufacturer’s specifications
- Please do not operate the charger when your hands are wet to prevent electric shocks or fire hazards.Please do not place the MCG123030BK22 wireless charger in a humid area.
- A power supply unit is not included with this product, we recommend that you use a 5V/3A power supply
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body