DIGITUS DN-95317 Gigabit Ethernet PoE Switch Instruction Manual
- September 6, 2024
- DIGITUS
Table of Contents
DIGITUS DN-95317 Gigabit Ethernet PoE Switch
Product Specifications:
- Fixed port: 8x 10/100/1000Base-TX ports
- LED Indicators: PWR, PoE, Link/Act LED
- Input voltage: 100V~240V AC, 50/60Hz (for power adapter), 48VDC (for switch)
- Network Media: 10BASE-TX: UTP category 5, 5e cable, 100BASE-TX: UTP category 5, 5e cable, 1000BASE-TX: UTP category 5, 5e cable
- Forwarding Rate: 10BASE-T: 14880pps/port, 100BASE-TX: 148800pps/port, 1000BASE-TX: 1488000pps/port
- Power Supplies: 96W
- Operating temperature: Relative humidity 20% ~ 85% (non-condensing)
- Storage temperature: Thermal methods Fanless
- Switching capacity: 16G
- MAC address table: 8K
- Weight: 1000g
Product Usage Instructions
Installation:
- Connect the AC power cable to the switch and plug it into a power outlet.
- Connect your network devices to the switch using Ethernet cables.
Power Over Ethernet (PoE) Setup:
- Ensure the devices you want to power via PoE are compatible.
- Connect the PoE-enabled devices to the PoE ports on the switch.
LED Indicators:
Monitor the status of each port using the LED indicators. Green indicates a connection while blinking signifies data transfer.
Troubleshooting:
If you encounter any issues, refer to the manual for troubleshooting steps or contact customer support.
Frequently Asked Questions
- Q: Can this switch be mounted on a wall?
- A: No, this switch is designed for desktop use and cannot be wall-mounted.
- Q: What is the maximum power output of this switch?
- A: The switch has a maximum power output of 96 Watts distributed across the PoE ports.
- Q: Does this switch require any configuration?
- A: No, this is an unmanaged switch, so it does not require any configuration.
Product Description
The DIGITUS Gigabit Ethernet PoE Switch with eight Power over Ethernet ports, offers your network significant improvement in terms of performance and efficiency. Thanks to PoE support, you only need a single (network) cable for power and data transfer. This switch makes it much easier to connect devices such as access points, network cameras, and IP telephones, an d requires far less cabling than alternatives. It also allows you to extend your network in places where there are no power supply cables or sockets available. The switch does not require any configuration and therefore guarantees quick and seamless integr nation into the network. Moreover, the fanless design of the Switch ensures soundless operation, which makes this device the perfect solution foroffice environments and meeting rooms.
Product Features
- 8-Port 10/100/1000 Mbps PoE Gigabit Desktop Switch
- Ethernet IEEE802.3/802.3u/802.3x/802.3ab/IEEE802.3 af/at
- Power over Ethernet (PoE) – You only need one cable for power and data transfer
- PoE power budget: 96 Watts (one to eight ports)
- Supports PoE: Provides 8 PoE Port, each port output 30W maximum power
- No configuration necessary
- Maximum power output: 96 Watts
- Status LEDs on each port
- Pin Feet: V- (RJ45 Pin 1, 2) V+ (RJ45 Pin 3, 6)
- Circuit isolation protection
- Backplane: 16Gbps
- MAC address table: 8K
- Dimensions (L x W x H): 250 mm x 150mm x 42 mm
- Weight: 1000 g
- Color: Black
Package Content
- Port Gigabit Switch
- Manual
- AC Power cable
Product Specifications
| Item | Description |
|---|
Summarize
Fixed port| 8x 10/100/1000Base-TX ports
LED Indicators| PWR, PoE, Link/Act LED
Input voltage| 100V~240V AC, 50/60Hz (for power adapter)
48VDC (for switch)
Network Media
| 10BASE-TX: UTP category 5, 5e cable 100BASE-TX: UTP category 5, 5e cable
1000BASE-TX: UTP category 5, 5e cable
Forwarding Rate
| 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port
1000BASE-TX: 1488000pps/port
Power Supplies| 96W
Operating
temperature
| 0°C ~ 40°C
Storage temperature| -10°C ~ 70°C
Relative humidity| 20% ~ 85% (non-condensing)
Thermal methods| Fanless
Switching capacity| 16G
MAC address table| 8K
Weight| <2 Kg
PoE
PoE port| 8 10/100/1000Base-TX ports
All 8 PoE ports
PoE Standard| IEEE802.3af, IEEE802.3at,
per port 15.4W, max 30W
Pin assignment| V – (RJ45 Pin1, 2), V+ (RJ45 Pin 3, 6)
Hardware Description
The Front Panel
The front panel consists of LED Indications.
Indicators
| LED | Status | Color | Description |
|---|---|---|---|
| Power | On | Green | The switch is supplied with suitable power. |
LINK/ACT
| On| Green| The port is connecting.
Blinks| –| The port is receiving or transmitting data.
Off| –| The port is not linked successfully with the device.
PoE
| On| Green| PD is connected
Off| –| No PD is connected, or power forwarding fails
RJ 45 Ports (Auto MDI/MDIX)
8 auto sensing ports of 10Base T, 100Base TX or 1000Base TX connections.
All ports can support Power over Ethernet to power devices.
Remark: MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you can connect to another Switch or workstation without changing pin to pin or crosso ver cabling.
Back view
- Grounding: Please connect the grounding screw when using this switch.
- AC Power Connector: Plug the female connector into the switch and male connector into a power outlet. Support input voltages 100~240 VAC.
This is a Class A product. In home environment, this product may cause radio interference. In this case, the user may be required to take appropriate measures. Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the manufacturer’s address.
- info@assmann.com
- Assmann Electronic GmbH
- Auf dem Schüffel 3
- 58513 Lüdenscheid
- Germany