PISEN TP-C69 15W Wireless Auto Clamping Car Mount Charger User Manual
- September 6, 2024
- PISEN
Table of Contents
- PISEN TP-C69 15W Wireless Auto Clamping Car Mount Charger
- Technical Specifications
- Usage Step
- Indicator Light Description
- Product Appearance Diagram
- Matters Needing Attention
- PISEN
- FCC Warning
- Specifications:
- Frequently Asked Questions (FAQ)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PISEN TP-C69 15W Wireless Auto Clamping Car Mount Charger
USER MANUAL
MODEL: TP-C69
We Clamping appreciate Car your Mount purchase Charger. of Pisen 15W Wireless Auto Please smooth read operation, these and instructions keep this carefully instructions to ensure properly safe for future reference. The products charging or digital and product which is used can be for charged in a mobile wireless phones manner.
Technical Specifications
Note:
Please confirm whether your device support the wireless charging function before charging the product.
Usage Step
1. Fix the holder base to the air outlet of the air conditioner or other
places where it can be fixed with clips.
2. Connect the holder fixing collet to the air outlet base, adjust the angle
and tighten the locking knob on the collet.
3. Connect the Type-C charging cable to the Type-C port of the holder and the
car charger.
4. Place your phone on the holder and pull the bottom bracket to adjust the
height of the phone.
5. Press any button on the side and the clamping arms on both sides of the
holder will automatically retract and clamp the phone.
6. Press any button on the side again, and the clamps on both sides of the
holder will open, allowing you to take out your phone.
Indicator Light Description
Product Appearance Diagram
Matters Needing Attention
1 . When using this product, do not cover it with any items.
2. Please do not expose this product to direct sunlight, humid environments for use or storage.
3. Do not disassemble, modify, or repair this product by yourself.
4. Do not put this product into fire, water, or other corrosive liquids.
5. Suggest using with PISEN or other cables with relevant qualifications and certifications.
6. Please do not plug, unplug or adjust the product during driving to prevent accidents.
7. If there are abnormal phenomena such as high temperature or no charging during use, please stop using immediately and contact after-sales service.
8. Please keep away from children to avoid accidents.
9. When charging, do not place magnetic CARDS such as magnetic CARDS and bank CARDS on the wireless charging device.
10. Unless supervised or guided by professionals, the following individuals (including children) are not suitable for using this product: those with physical or mental impairments, lack of awareness of this equipment, and lack of operating experience. It is essential to supervise children to ensure safe use.
PISEN
Design By Pisen Made in China
Manufactured by: Guangdong PISEN Electronics Co., Ltd.
Address: Building 5, 1 st Floor, No. 9, Qinfu 1st Street, Liuyue Nan Community, Henggang Town, Longgang District, Shenzhen City, Guangdong Province, China ,
PISEN® The brand belongs to Guangdong PISEN Electronics Co., Ltd.
For FAQs and more help information, please visit : https://en.pisengroup.com
Contact: support@pisengroup.com
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
Specifications:
-
Compliance: FCC radiation exposure limits
-
Environment: Uncontrolled
-
Recommended Minimum Distance: 20cm between the radiator and body
-
-
Frequently Asked Questions (FAQ)
Q: What are the FCC radiation exposure limits?
A: The FCC sets specific limits on the amount of radio frequency (RF) radiation that electronic devices can emit to ensure safety in various environments.
Q: Why is it important to maintain a minimum distance between the
radiator and the body?
A: Maintaining a minimum distance helps reduce the potential health risks associated with prolonged exposure to RF radiation.