SHARGE 2BB2Z-C3 Carbon Mag Power Bank Instructions

September 5, 2024
SHARGE

SHARGE 2BB2Z-C3 Carbon Mag Power Bank

Package Contents

  • Power Bank x l
  • Cable x l
  • User Manual x 2

Product Information

Product Name: CarbonMag Power Bank
Model: C3
Port Type: USB-C
Input:
USB- C: SV⎓3A/9V⎓2.2A/12V⎓l.67A
Output:
USB-C : SV⎓3A/9V⎓2.2A/12V⎓l.67A
Total Output: SV⎓3A
Wireless Output: 15W Max
Battery Capacity: 5,000mAh/3.85V/19.25Wh
Rated Capacity: 3,000mAh (5V- 2A)
Conversion Rate:≥ l:.77%
Dimensions: 102 x 70 x 8.8mm
Weight: 120g

Product Introduction

  1. Use the charging cable to charge your power bank.

  2. The USB-C and wireless charging of the power bank can automatically recognize the output. When wireless charging is active, the blue light stays on, and the white light displays real-time battery level. When USB-C output is active, the white light stays on, displaying real-time battery level.

  3. The power bank supports simultaneous charging and discharging. At this time, the blue light remains on, and the white light flashes. When the power bank is fully charged, the white light stays on.

  4. Single press the button to check the power level of the power bank, double press the button to turn off the output, and the power bank enters shutdown mode.

  5. When the power bank detects metal objects, the blue light flashes rapidly for 5 seconds before turning off, and the power bank enters shutdown mode. Note: Do not place the power bank too close to cards with magnetic strips or chips (such as ID cards, bank cards, etc.) to avoid deactivation of the cards.

FCC warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiatian Expasure Statement

The device has been evaluated ta meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Join our Discard SHARGE

Follow us on lnstagram @SHARGE_OFFICIAL

CUSTOMER SUPPORT

E-mail: info@sharge.com
Official Website: www.sharge.com
Manufacturer : Sharge Technology (Shenzhen) Co., Ltd.
Address: Room 305, 3rd Floor, Xinzhongtai Industrial Park, Building 3, Hengfeng Community, Longhua Street, Longhua District, Shenzhen, Guangdong, China

This symbol Indicates thot this product sholl not be treated os household waste. Instead It shall be handed over to the appllcable collection JX)lnt for the recycling of electrical and electronic equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals