SHARGE SP020A Icemage Power Bank 1000mah User Manual

ICEMAG POWER BANK

10000mAh

Product Parameters

Product name: SHARGE ICEMAG power bank 10000mAh
Product model: SP020A
Product dimensions: 115.2×70.5x18mm
Product weight: ≈ 225g
Port type: USB-C
USB-C input: 5V⎓3A, 9V⎓2A, 18W (Max)
USB-C output: 5V⎓2.4A, 9V⎓2.22A, 12V⎓1.67A
Wireless charging output: 5W, 7.5W
Total output: 5V⎓3A
Conversion efficiency: ≥70%
Battery capacity: 10000mAh 3.7V/37Wh
Rated capacity: 5800mAh
Package list: Power bank x1, User manual x1, CC cables x1

Manufacturer name: Sharge Techonology (Shenzhen) Co., Ltd.
Address: Room 305, 3rd Floor, Xinzhongtai Industrial Park, Building 3, Hengfeng Community, Longhua Street, Longhua District, Shenzhen, Guangdong, China
E-mail: [email protected]
Official website: www.sharge.com

Product introduction

01. Description:

Ultimate Choice for EDC Devices This product is a compact portable power bank, supporting 18W Max input fast charging, 20W Max output fast charging, and 7.5W Max magnetic wireless charging. It contains high-quality Li-ion batteries and charging-discharging chip, providing outstanding performance in safety, efficiency, compatibility, etc. Meanwhile, the power bank has a cooling fan for heat dissipation during wireless charging.
The button serves as a power level check function, but not power on/off. This product automatically detects charging and discharging without the need for button operation.
Wireless charging supports auto detection. When a device is approaching to the wireless charging postion on the powerbank, wireless charging and cooling fan will start automatically, with LED light on.

1. Wireless charging indicator light
2. The battery level indicator lights from top to bottom are LED1 – LED4
3. Air intake pole
4. Button
5. Air outlet pole

Battery level display for reference:

02. Button Operation:

Single click: power check display.
Long-press for 3s: switch to low current mode.

03. Low Current Charging Mode:

When not charging, long press the power check button for 3s to enter low current charging mode, which can charge low-current devices such as Bluetooth headsets and wristbands. The LED lights will light up in sequel to remind you that the power bank is in low current charging mode. To exit this mode, just long press the power check button again for 3s. The working time of this mode is set to 2 hours and will exit automatically after 2 hours.

04. FOD:

If foreign objects are detected, the wireless charging indicator will flash.

Exclusions from Warranty

01. Unauthorized repairs, misuse, collision, negligence, abuse, liquid ingress, accidents, modifications, and incorrect use of accessories.
02. The warranty period has expired.
03. Damages caused by force majeure factors.
04. Cases that do not meet the performance faults listed in the “Product Performance Failure”.
05. Performance failure listed in the “Product Performance Failure” caused by human factors.

Product Performance Failure

structural or material factors
02. Unable to display battery level
03. Unable to charge electronic devices

Product safety information

Before using this product, please read all instructions and warnings. Improper use may result in damage to the product or personal safety.
01. Store this product in a cool, dry place.
02. Do not store this product in high-temperature or humid environments.
03. Use of power supply or chargers not recommended or sold by the manufacturer may result in fire or risk of injury to persons.
04. Operating temperature should be between 32 and 104°F (0 and 40°C).
05. Do not disassemble the product. If the product needs service or repair, please contact qualified service persons. Incorrect reassembly may cause a fire or risk of injury to persons.
06. If the product is not used for a long time, it should be charged and discharged every three months.
07. When charging a device, the product may feel warm. This is a normal condition and should not be a cause for concern.
08. Battery performance will decline over several years under normal o perating conditions.
09. Do not dispose of the product in heat or fire.
10. Do not clean this product with harmful chemicals or detergents.
11. Misuse, dropping, or excessive force may cause damage to the product.
12. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems seperate from each other.
13. Note that discharged batteries may cause fires or smoke.
14. Be aware that if the battery (battery pack or installed battery) is replaced with incorrect types, there may be a risk of explosion.
15. Be aware that the battery (battery pack or installed battery) must not be exposed to excessive heat environments such as sunlight or fire.
16. Batteries may explode or leak flammable liquids or gases at extremely low pressures.

Declaration of Toxic and Hazardous Substances in Electronic Information

Products

This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that the content of the toxic and hazardous substance in all homogeneous materials of the component is below the limit specified by GB/T 26572.
X: Indicates that the content of the toxic and hazardous substance exceeds the limit specified by GB/T 26572 in at least one homogeneous material of the component.

The information in this table is provided to suppliers in the form of data and testing results that comply with RoHS environmental requirements.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Customer Service

The following services are available for you to enjoy free of charge according to this policy: returns, exchanges, and repairs. Repairs, exchanges, and returns must be processed with a receipt.

01. Within 7 days of receipt, you may return the product without reasons, but you must bear the shipping costs.
02. 12-month warranty in the event that the product experiences any performance failure as specified in the “Product Performance Failure” list and is duly confirmed upon inspection.

Join our Discord           Join our FB Group

Made in China

Documents / Resources

| SHARGE SP020A Icemage Power Bank 1000mah [pdf] User Manual
SP020A Icemage Power Bank 1000mah, SP020A, Icemage Power Bank 1000mah, Power Bank 1000mah, Bank 1000mah
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>