SHARGE SP020 Flow Power Bank User Manual
- June 9, 2024
- SHARGE
Table of Contents
SHARGE SP020 Flow Power Bank
Introduction
Thank you for your order from SHARGE. Before using the product, review this manual.
Package List
-
Power Bank x 1
-
Cable x 1
-
Manual x 1
Illustration
- Battery Indicator
- Circuit Board
- On/Off
- USB-A Output Port
- USB-C Input/Output Port
Specifications
Model : SP020| Battery capacity : 10000mAh 36.9Wh 3.69V| Dimension: so·60
*28.5mm| Capacity: 5800mAh (5V/3A)
---|---|---|---
Weight: 200g| Input: 5V⎓ 3A, 9V⎓2A, 12V⎓ 1.5A| Max Output: 20W| Standard :
GB/T 35590-2017
Output : USB-C: 5V⎓3A, 9V⎓ 2.22A, 12V⎓1.67A, USB-A: 5V⎓3A, 9V⎓ 2A, 12V⎓ 1.5A,
USB-A+USB-C: 5V⎓3A
User Guide
-
Power On
This product is equipped with automatic detection function, and it will start to work when the device is connected. -
Power Off
When no device is connected for 30 seconds, it will automatically shut down.
Double click the switch button to power off when powered on. -
Remain Battery Display
Press the power button to show the remaining battery. Display will turn off after 30 seconds. -
Input
Each indicator light represents 25% of the battery. During the charging process, the indicator lights flash. All lights are on when charging is complete
It can be charged with the charger
Support fast charging function. It can be charged fast by the fast charging charger.
To ensure the normal use of this product. please use a charger that meets the input specifications of this product. -
Output
a. Charge your device:
Connect the product to your device with a charging cable to charge your device.
b. Support fast charging:
Both the USB-A port and the USB-C port support the fast charging function independently
When using 2 ports for charging, the product will turn off the fast charging function and only support ordinary 5V charging for security
Device switches to fast charging mode only when the device is compatible with the fast charging protocol supported by this product. Otherwise, only normal SV charging is supported.
c. Discharge display:
As the power decreases during the output process, the 4 indicator lights will go out one by one. When the last indicator light starts flashing, it means the remaining power is less than 10%, please charge the product in time
Low Current Mode
- Long Press for 5 seconds, switch to small current mode. Four lights will turn on and off one by one.
- Long Press for 3 seconds, small current mode automatically turns off
- Stay by for 2 hours, small current mode automatically turns off. * In normal status, device will shut down when current is less than 60mAh. It won’t work well for watches, earphones and some small devices. To charge watches, earphones and some small devices. please start the small current mode by long pressing for 3 seconds or unplugging the device for 2 hours.
FAQ
- It is a normal that the output ends if the current charged to the device continues to be too small.
- Once the product drained, it will automatically stop output. Please charge the product in time
- When the product are in protection state due to short-circuit, over-discharge, etc. (No output after pressing the ‘on-off key”), please use an external charger to connect the product to charge to restore the output
- When the product is used in a non-applicable ambient temperature, it may enter the over-temperature protection state (shown as stop discharge). At this point, just move the product to a suitable temperature environment, and short press the “on-off key” to resume charging.
Note
- For the first use, please fully charge the product.
- To protect your device, please do not use the all-in-one data cable to charge multiple devices at the same time in case of device damaged
- After the product is charged, please unplug the charging cable in time to avoid battery loss.
- In order to get a better product experience, use accessories such as SHARGE charging cables and power adapters
- Please stop using this product if there are abnormalities such as battery swelling, leakage, deformation, etc.
- Please keep t his product away from children.
- If the product won’t be used for a long time, please store it in a dry environment. To keep battery life, please fully charge and discharge the product at least once every 3 months
Warning
- Do not expose this product to high-temperature environments or around heat generating equipment, such as cars, sun exposure heaters, microwave ovens, ovens and other high-temperature environments, as it may cause an explosion
- It is strictly forbidden to use unapproved or incompatible power adapters. charging cables, etc., which may cause fire, explosion or other dangers
- Do not !eave this product in an investigated space for a long time, such as handbags, etc. The confined space may cause fire and other dangers.
- Product contains lithium-ion batteries. It is strict ly forbidden to disassemble the product casing without permission to avoid damage to the batteries or fire hazard.
- Do not drop, squeeze. puncture, short-circuit the product, or throw it into water or f ire for the risk of fire
- Please dispose in accordance with local regulations. Do not dispose it as household waste. Improper disposal may result in an explosion
- Do not use product under thunderstorms, as it may cause product failure or risk of electric shock.
Declaration of Toxic and Hazardous Substances in Electronic Information
Products
| Part Name | Toxic and hazardous substance and elements |
|---|---|
| Pb | Hg |
| PCB |
X
|
0
|
0
|
0
|
0
|
0
Plastics|
0
|
0
|
0
|
0
|
0
|
0
Metals|
X
|
0
|
0
|
0
|
0
|
0
Components|
0
|
0
|
0
|
0
|
0
|
0
This form is prepared according to the provisions of SJ/T 11364.
0: Indicates that the content of this toxic and hazardous substance in
all homogeneous materials of this part is below the limit requirement
specified in GB/T 26572 standard
X: Indicates that the content of this toxic and hazardous substance in at
least one homogeneous material of this part exceeds the limit requirement
specified in the GB/T 26572 standard.
The information in this form is the data provided to the supplier and the test
results that meet the RoHS environmental protection requirements.
Customer Support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>