HERCULES 2-Bar and 3-Bar Footing Stands User Guide
- September 4, 2024
- Hercules
Table of Contents
2-Bar and 3-Bar Footing Stands
Specifications:
- Product Name: 2-Bar & 3-Bar Footing Stands
- Recommended Placement: Every 4 feet
- Installation: Snap reinforcement into clips
- Additional Feature: No wire tying needed
- Function: Ensures reinforcement stays in place before, during,
and after concrete pour
Product Usage Instructions:
Step 1: Placement
Ensure the surface is clean and clear of any debris before
placing the footing stands. Position a stand every 4 feet along the
reinforcement area.
Step 2: Snap Reinforcement
Take the reinforcement bars and snap them securely into the
clips of the footing stands. Make sure they are fitted snugly to
prevent any movement during the concrete pour.
Step 3: Finishing Touches
Double-check the placement of all footing stands and
reinforcement bars to ensure they are properly aligned. Once
confirmed, the setup is ready for the concrete pour.
Frequently Asked Questions (FAQ):
Q: Do I need to wire tie the reinforcement bars with these
footing stands?
A: No, our 2-Bar & 3-Bar Footing Stands are designed to
securely hold the reinforcement bars without the need for wire
tying.
Q: Can these footing stands be reused?
A: Yes, these stands are reusable. After use, simply clean them
from any concrete residues for future projects.
Recommended Placement Guide
2-Bar & 3-Bar Footing Stands
For our 2-Bar and 3-Bar Footing Stands, we recommend placing a stand every 4
feet. Simply snap the reinforcement into the clips, and you are finished. No
wire tying needed. Our footing stands ensure the reinforcement stays in the
right place
before, during, and after the concrete pour.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>