GUSSLM Wireless CarPlay Adapter User Guide
- September 5, 2024
- GUSSLM
Table of Contents
GUSSLM Wireless CarPlay Adapter
CarPlay Update Instructions
-
Step 1:
CarPlay connect to charger.
Note: When upgrading, don’t directly connect to the USB port on the car.
Image Description: A CarPlay device connected to a power strip. -
Step 2:
Connect to CarPlay Wi-Fi.
Password: 88888888
Image Description: A smartphone screen showing the Wi-Fi settings with “smartDongle-FC0C” selected. -
Step 3
Open Safari.
Enter 192.168.1.101
Image Description: A smartphone home screen with the Safari browser icon highlighted. -
Step 4:
Click to update.
Note: During the update, the signal light of CarPlay will flash, and it will return to normal after successful update.
Image Description: A smartphone screen showing an update page with a button labeled “Update” and a CarPlay device with a flashing signal light. -
Step 5:
Update successful.
Image Description: A smartphone screen showing a message “Your software is up to date.” -
Step 6:
Fill in the information and submit.
Note: Please fill in this information if your car is not compatible during connection.
Image Description: Two smartphone screens. The first screen shows a form to fill in car details and submit. The second screen shows a message “Operation successful.”
Specifications
| Step | Description |
|---|---|
| Step 1 | Connect CarPlay to charger |
| Step 2 | Connect to CarPlay Wi-Fi with password 88888888 |
| Step 3 | Open Safari and enter 192.168.1.101 |
| Step 4 | Click to update |
| Step 5 | Update successful |
| Step 6 | Fill in information and submit |
FAQ
-
What should I do if the update fails?
Ensure that the CarPlay device is properly connected to the charger and try the update process again. -
What should I do if my car is not compatible during connection?
Fill in the information on the update page and submit it for further assistance. -
How can I tell if the update is successful?
The signal light on the CarPlay device will stop flashing and the update page will show a message “Your software is up to date.”
CarPlay Update Instructions
-
Step 1 : Carplay connect to charger.
(Ps: When upgrading, don’t directly connect to the USB port on the car )
-
Step 2 : connect to Carplay WIFI.
Password: 88888888
-
Step 3 : Open Safari. Enter 192.168.1.101
-
Step 4 : Click to update.
(Ps: During the update, the signal light of carplay will flash, and it will return to normal after successful.)
-
Step 5 : Update successful.
-
Step 6 : Fill in the information and submit.
(Ps: Please fill these information If your car is not compatible during connect )
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>