IP-INTEGRA TECHNOLOGIES Network Configurator Password Reset Application User Guide
- September 3, 2024
- IP-INTEGRA TECHNOLOGIES
Table of Contents
- Network Configurator Password Reset Application
- Product Information
- Specifications:
- Step 1: Power Off the Device
- Step 2: Download and Unzip the IP-INTEGRA Network
- Step 3: Run the IP-INTEGRA Network Configurator
- Step 4: Generate Configuration File
- Step 5: Transfer File to USB Stick
- Step 6: Connect USB Stick to Device
- Step 7: Power On the Device
- Q: Can I use the IP-INTEGRA Network Configurator for devices
- Q: Do I need an internet connection to use this tool?
Network Configurator Password Reset Application
“`html
Product Information
Specifications:
- Product Name: IP-INTEGRA Network Configurator
- Password Reset Method: USB Configuration File
- Supported Devices: Compatible with devices requiring admin
password reset
Product Usage Instructions
Step 1: Power Off the Device
Ensure that the device for which you need to reset the password
is powered off.
Step 2: Download and Unzip the IP-INTEGRA Network
Configurator
Download the IP-INTEGRA Network Configurator software from the
official website and unzip the files.
Step 3: Run the IP-INTEGRA Network Configurator
Launch the IP-INTEGRA Network Configurator software on your
computer.
Step 4: Generate Configuration File
In the Network Configurator, select “Reset Admin Password Only”
and click on “Generate Configuration File”.
Step 5: Transfer File to USB Stick
Insert a USB thumb drive into your computer and move the
generated configuration file to the USB stick.
Step 6: Connect USB Stick to Device
Remove the USB stick from the computer and insert it into the
device that requires the password reset.
Step 7: Power On the Device
Power on the device. During boot-up, the device will load the
configuration file from the USB stick and restore the default admin
password.
Frequently Asked Questions (FAQ)
Q: Can I use the IP-INTEGRA Network Configurator for devices
other than password resets?
A: The IP-INTEGRA Network Configurator is specifically designed
for resetting admin passwords on compatible devices.
Q: Do I need an internet connection to use this tool?
A: No, the tool operates locally on your computer and does not
require an active internet connection.
“`
Application Note Device Login Password Reset Introduction In the document
bellow, we will instruct you to reset your IP-INTEGRA device password. Tools
required for this procedure are an IP-INTEGRA Network Configurator and a USB
thumb stick. The Procedure
1. First power of the device that requires a password reset. 2. Download and
unzip the IP-INTEGRA Network Configurator. 3. Run the IP-INTEGRA Network
Configurator. Following screen will show:
4. Tick the “Reset Admin Password Only” and click on Generate Configuration
File. 5. Plug in the USB thumb stick and move the generated file to the stick.
6. Unplug the USB stick from PC. 7. Plug in the USB stick in the device that
requires password reset. 8. Power on the device. During boot-up the device
will load the generated file and restore the default admin password.