Lemorele LC06 Plus USB to HDMI Adapter User Manual

LC06 Plus USB to HDMI Adapter

“`html

Specifications

• Product Name: USB to HDMI Adapter
• Size: Compact
• Material: ABS + Aluminum alloy
• Connectors: HDMI Out, USB-A
• Resolution: 1080P
• Compatible Systems: Windows 10 and above, Mac
  OS 10.15 and above

Product Usage Instructions

Connection Diagram

Connect the adapter as follows:

UDisplay Instructions for Windows

1. Connect the adapter to your computer.
2. Install the UDisplay driver from the provided CD.
3. Open the UDisplay application and follow the on-screen
   instructions to connect and display your screen.

UDisplay Instructions for Macbook

1. Connect the adapter to your MacBook.

2. Install the UDisplay application from the CD that pops up on
   your desktop.

3. Follow the on-screen prompts to set up the extension switch and
   complete necessary settings.

Equipment Upgrade Steps

To upgrade your device:

1. Open UDisplay and go to Device Settings – Device Version.
2. Select the device for upgrade and follow the on-screen
   instructions to complete the upgrade process.

Precautions

• Manually open UDisplay on Mac computers during the first
  run.

• If an exception occurs in extended mode, ensure Mac is set as a
  built-in display in Mac display settings.

• UDisplay supports 1080P output only.

• This product supports Windows 10 and above, and Mac OS 10.15
  and above.

• This product does not record personal data.

Frequently Asked Questions (FAQ)

Q: Can this adapter support resolutions higher than 1080P?

A: No, this adapter supports a maximum resolution of 1080P.

Q: Is this adapter compatible with Linux systems?

A: No, this adapter is not compatible with Linux systems. It
supports Windows 10 and above, as well as Mac OS 10.15 and
above.

“`

USB-A to HDMl Adapter
Cast small screen to big screen
MODEL: LC06 Plus USER MANUAL

Product introduction
Portable USB-A to HDMI adapter. It can connect desktop computers or laptops with USB-A port to monitors, projectors, HDTVs or other devices with HDMI port, and can extend the laptop screen to the monitor.

Product parameters

2

1 1.USB-A 2.HDMI Out

Product Name

USB to HDMl Adapter

Size

55×36×15mm

Material Connectors HDMI Out

ABS+Aluminum alloy USB-A, HDMI 1080P

Compatible Systems

Windows10 and above, Mac OS10.15 and above

Connection diagram
Monitor/Projector/TV

HDMI cable

UDisplay

Please must install the UDisplay driver before using the docking station!

laptop/PC

UDisplay instructions
Windows
Connect this product for the first time, you need to first enter my computer double-click to run the program

My computer: CD Drive (E:) UDisplay

CD (E:)UDisplay 4.83 MBCDFS
Double-click this drive letter to install

Windows
After entering the application interface, it can be used normally. The connection status displays as connected, and the screen can be displayed.
Opening the extended screen function for the first time requires confirmation according to prompts Install the device as shown in Figure 1 or Figure 2 (Note: During the installation process, the computer may restart, which is a normal phenomenon.)

Figure(1)

Figure(2)

Macbook Air/Pro 1 First time connecting to this product, click on the icon and run the program

UDisplay
Macbook

After inserting the product into the MacBook, the CD-ROM driver pops up in the upper right corner of the
desktop, and click to install the UDisplay application. Finally, follow the prompts and follow up.

2
Extension switch

The first use requires opening the following three permissions Click the lock button, enter the computer password, and click unlock; Click on “screen recording” and check UDisplay

Macbook

Please follow the next steps to complete this necessary setting!

Click to “Quit and reopen” Turn on”Keystroke Receiving” Click on “Input Monitoring” and check UDisplay

Click to “Quit and reopen”
Turn on”Accessibility Access” Click on “Accessibility” and check UDisplay

Equipment upgrade steps:
Windows 1. Enter the “UDisplay” and click on “Device Settings – Device Version”;

2. Select the device to be upgraded, click “Wait for Upgrade – Start Upgrade”;

3. After the progress bar is completed and the device is restarted, the upgrade will be successful.
Macbook Air/Pro 1. Enter the “UDisplay” and click on “Device Settings – Device Version”;

2. Select the device to be upgraded, click “Wait for Upgrade – Start Upgrade”;

Precautions:
1. Mac computers need to manually open the UDisplay application during the first run.
2. When there is an exception in the extended mode, please confirm that the Mac is used as a built-in display in the Mac display settings.
3. UDisplay only supports 1080P output. 4. The supporting system is Windows 10 and above, and
Mac OS10.15 and above. Please upgrade your computer to the latest system. (Android and Linux are not supported) 5. This product does not record any personal data, please rest assured to use it!

Once the settings are completed, the screen can be projected.

3. After the progress bar is completed and the device is restarted, the upgrade will be successful.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>