Lemorele LC06Y-1 USB to HDMI VGA Adapter User Guide
- June 6, 2024
- Lemorele
Table of Contents
Lemorele LC06Y-1 USB to HDMI VGA Adapter User Guide
- Name: USB to HDMI/VGA Adapter
- Function: this product is a kind of potable USS adapter, which is inverted into HDMI/VCA output through the computer with USB interface, and widely applied in notebooks computers and other devices with USB interface.
- Product Connection
-
Parameters
Supported resolution: 1080P@60Hz / 720P@OOHz /-480@(i()Hz Supported system: Windows, macOS -
Windows Operating Instructions
- Download EZCast softw.re from:vww.ezcast.com. (Note: the software does not need to be opened manually after installation. It will run automatically after the device is inserted into the USS interface.)
- Mirror Mod~ HDM/VGA display and notebook show the same content
3) Extend Mod : drag the running content from the right side of the PC screen,
which will drag the software to the screen to display, so as to realize the
extension.
4) Disconnect: disconnected laptop computer from TV.
5) Pause: pause Mirror/Extend.
6) Modify Resolution: open EZCast software, click “”Setting· in the left
column, and click the right of “Resolution” to select the resolution you need.
7) Video/Game switch: open EZCast software, click “Setting” in the left
column, and click the right of “Display” to select “Video” or “Game”.
8) Language Setting. open EZCast software, click “Setting” in the left column,
and click the right of “Langue” to select the language you need.
- macOS Operating Instructions
l)EZCast Software Download: www.ezcastcom
- Open the computer settings, select security & privacy, and allow the instillation of the third Party application program , as shown in the following figure, and install the software installation according to the prompts.
3) Select privacy, click microphone, and tick the box in front of EZCast app
on the right, as shown in the following figure.
4) insert the equipment, run EZCast software, dick search device, select
magiclin1<** click mirror to realize screen shoaling click airplay switch
of Apple computer, and select magi clink *** to realize screen expansion
(the connection with EZCast will be disconnected when selecting screen
expansion, please click ok to confirm).
- When choosing ‘Extend Mode’, and if the large screen can not display I full screen, please select the right resolution of the large screen in the Settings to get full screen.
This manual takes 16:9 screen as an example, please follow the steps below.(Notice: Please choose extend mode first, and then follow the steps below)
macOS
Windows
