Rheem RP15AZ18AJ2NA Heat Pumps Instruction Manual

: September 3, 2024
: Rheem

Table of Contents

RP15AZ18AJ2NA Heat Pumps
Specifications
Product Information
Installation and Setup
Product Usage Instructions
FAQ
Q: What should I do if my Heat Pump RP15AZ is not
Q: Can I install additional accessories on the RP15AZ Heat

RP15AZ18AJ2NA Heat Pumps

“`html

Specifications

Cooling Efficiencies: Up to 16 SEER / 11.7 EER
Heating Efficiencies: Up to 8.1 HSPF
Nominal Sizes: 1.5 to 5 Tons [5.3 to 17.6 kW]
Cooling & Heating Capacities: 13.36 kBTU to 45.6 kBTU

Product Information

The Heat Pumps RP15AZ offer efficient cooling and heating
solutions with SEER ratings up to 16 and EER ratings up to 11.7.
They provide heating efficiencies up to 8.1 HSPF, making them
suitable for various climates. The units come in nominal sizes
ranging from 1.5 to 5 tons, catering to different space
requirements.

Installation and Setup

Proper sizing and installation of the equipment are crucial for
achieving optimal performance. It is essential to match the split
system air conditioners and heat pumps with appropriate coil
components to meet Energy Star standards. For detailed installation
guidelines, consult your Contractor or visit
www.energystar.gov.

Product Usage Instructions

Model Number Identification: The model number
contains information about the brand, product category, capacity,
voltage, type, and controls.
General Data: Includes information on nominal
tonnage, valve connections, motor specifications, and electrical
data such as line voltage details and compressor
specifications.
Accessories: Lists optional accessories like
compressor crankcase heaters, low ambient control, compressor sound
covers, and more.

FAQ

Q: What should I do if my Heat Pump RP15AZ is not

cooling/heating properly?

A: If your unit is not performing as expected, check the air
filters for blockages, ensure proper airflow around the outdoor
unit, and verify that the thermostat settings are correct. If
issues persist, contact a qualified HVAC technician for further
inspection.

Q: Can I install additional accessories on the RP15AZ Heat

Pump?

A: Yes, you can enhance your unit with optional accessories like
compressor crankcase heaters, low ambient control devices, and
compressor sound covers. Ensure that any add-ons are compatible
with your specific model for optimal performance.

“`

Heat Pumps RP15AZ
Endeavor® Line Classic Plus® Series iM Heat Pumps
RP15AZ
Cooling Efficiencies up to: 16 SEER2 / 11.7 EER2 Heating Efficiencies up to: 8.1 HSPF Nominal Sizes: 1.5 to 5 Tons [5.3 to 17.6 kW] Cooling & Heating Capacities: 13.36 kBTU to 45.6 kBTU

*Proper sizing and installation of equipment is critical to achieve optimal performance. Split system air conditioners and heat pumps must be matched with appropriate coil components to meet Energy Star. Ask your Contractor for details or visit www.energystar.gov.
FORM NO. P11-827 REV. 2

Table of Contents RP15AZ

Table of Contents
Features & Benefits …………………………………………………………3 Model Number Identification …………………………………………….4 General Data/Electrical Data …………………………………………….5 Accessories ……………………………………………………………………6 Weighted Sound Power …………………………………………………. 6 Unit Dimensions ……………………………………………………………..7 Clearances …………………………………………………………………….8 Refrigerant Line Size Information ………………………………… 9-10 Performance Data …………………………………………………………11 Limited Warranty …………………………………………………………..12

2

Features and Benefits
· Two-Stage Scroll Compressor: Features two speeds (high and low) of cooling and heating, providing more precise temperature control, lower humidity and greater efficiency when compared to single stage compressors
· 7 mm Condenser Copper Coil1: Requires less refrigerant allowing for a smaller and lighter footprint while enhancing reliability
· Inverted Reversing Valve: Allows for faster heat transfer with gravity assist shifting and reduced joint stress for increased reliability

Features and Benefits RP15AZ
· PlusOne® Expanded Valve Space: 3 in. 4 in. 5 in. service valve space — provides a minimum working area of 27-square inches for easier access
· PlusOne® Triple Service Access: 15″ wide, industry leading corner service access, two fastener, removeable corner and individual louver panels — makes repairs easier and faster

1Does not apply to the 5 ton model 3

Model Number Identification RP15AZ

Heat Pumps

R

P

15

A

Z

18

A

J

2

N

A

Brand

Product Category

R – Rheem P – Heat Pump

SEER2 15 – 15.2 SEER2

Region A – All Regions

Refrigerant Z – R-410A

Capacity
18 – 18,000 [5.28 kW] 24 – 24,000 [7.03 kW] 30 – 30,000 [8.79 kW] 36 – 36,000 [10.55 kW] 42 – 42,000 [12.31 kW] 48 – 48,000 [14.07 kW] 60 – 60,000 [17.58 kW]

Major Series

Voltage

Type

Controls

Minor

Series

A – 1st Design J – 208/230/1/60 2 – 2+ Stage N – Non-Comm. A – 1st Design

[ ] Designates Metric Conversions

AVAILABLE MODELS RP15AZ18AJ2NA RP15AZ24AJ2NA RP15AZ30AJ2NA RP15AZ36AJ2NA RP15AZ42AJ2NA RP15AZ48AJ2NA RP15AZ60AJ2NA

DESCRIPTION Endeavor® Line Classic Plus ® Series 1 1/2 ton 15.2 SEER2 2-Stage iM Heat Pump-208/230/1/60 Endeavor® Line Classic Plus ® Series 2 ton 15.2 SEER2 2-Stage iM Heat Pump-208/230/1/60 Endeavor® Line Classic Plus ® Series 2 1/2 ton 15.2 SEER2 2-Stage Heat iM Pump-208/230/1/60 Endeavor® Line Classic Plus ® Series 3 ton 15.2 SEER2 2-Stage iM Heat Pump-208/230/1/60 Endeavor® Line Classic Plus ® Series 3 1/2 ton 15.2 SEER2 2-Stage iM Heat Pump-208/230/1/60 Endeavor® Line Classic Plus ® Series 4 ton 15.2 SEER2 2-Stage iM Heat Pump-208/230/1/60 Endeavor® Line Classic Plus ® Series 5 ton 15.2 SEER2 2-Stage iM Heat Pump-208/230/1/60

STANDARD EQUIPMENT R-410A Refrigerant Scroll Compressor Field Installed Filter Drier Front Seating Service Valves Internal Pressure Relief Valve Internal Thermal Overload Long Line capability Low Ambient capability with Kit 3-4-5 Expanded Valve Space Composite Basepan 2 Screw Control Box Access 15″ Access to Internal Components Quick release louver panel design No fasteners to remove along bottom Optimized Venturi Airflow Single row condenser coil Powder coated paint Rust resistant screws QR code External gauge ports Service trays

4

General Data/Electrical Data RP15AZ

General Data
MODEL NO.
Nominal Tonnage Valve Connections
Liquid Line O.D. in. Suction Line O.D. in. Refrigerant (R410A) furnished oz.¹ Compressor Type Outdoor Coil Net face area Outer Coil Net face area Inner Coil
Tube diameter in. Number of rows Fins per inch
Outdoor Fan Diameter in.
Number of blades Motor hp CFM RPM watts
Shipping weight lbs. Operating weight lbs.

(-)P15AZ 18AJ2NA
0.375 0.75 118
10.9 10.5 0.276
2 22
20 2 1/6 2582 1075 145 157 150

(-)P15AZ 24AJ2NA
0.375 0.75 118
10.9 10.5 0.276
2 22
20 2 1/6 2582 1075 145 157 150

(-)P15AZ 30AJ2NA

(-)P15AZ 36AJ2NA

(-)P15AZ 42AJ2NA

(-)P15AZ 48AJ2NA

(-)P15AZ 60AJ2NA

0.375 0.75 120
19.5
0.276 1 22
24 3 1/5 4077 850 222 209 202

0.375 0.75 127 2-stage Scroll
21.5
0.276 1 22
24 3 1/5 4206 850 246 221 214

0.375 0.875 143
21.5
0.276 1 22
24 3 1/5 4206 850 246 247 240

0.375 0.875 146
21.5
0.276 1 22
24 3 1/5 4206 850 246 247 240

0.375 0.875 220
32.5
0.375 1 20
26 3 1/5 5106 850 294 298 291

Electrical Data

Line Voltage Data (Volts-Phase-Hz)

208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60

Maximum overcurrent protection (amps)²

15

25

30

45

50

Minimum circuit ampacity³

11

15

18

20

26

28

31

Compressor

Rated load amps

8

11

14

15

20

21

24

Locked rotor amps

56

61

87

102

151

143

151

Condenser Fan Motor

Full load amps

0.75

1.0

Locked rotor amps

1.5

2.56

¹Refrigerant charge sufficient for 15 ft. length of refrigerant lines. For longer line set requirements see the installation instructions for information about set length and additional refrigerant charge required. ²HACR type circuit breaker of fuse. ³Refer to National Electrical Code manual to determine wire, fuse and disconnect size requirements.

5

Accessories/Weighted Sound Power RP15AZ

Accessories

MODEL NO.

(-)P15AZ18

(-)P15AZ24

Compressor crankcase heater*

44-17402-44

Low ambient control

RXAD-A08

Compressor sound cover

68-23427-26

Compressor hard start kit Low pressure control

SK-A1

Factory Standard Factory Standard

High pressure control

Factory Standard Factory Standard

Liquid Line Solenoid (24 VAC, 50/60 Hz)
Liquid Line Solenoid (120/240 VAC, 50/60 Hz)

Solenoid Valve 200RD2T3TVLC

Solenoid Coil

61-AMG24V

200RD2T3TVLC 61-AMG24V

Solenoid Valve 200RD2T3TVLC 200RD2T3TVLC

Solenoid Coil 61-AMG120/240V 61-AMG120/240V

Classic Top Cap w/Label

91-101123-21

*Bi-flow kits are required when installing a liquid line solenoid on a heat pump.

(-)P15AZ30 44-17402-44 RXAD-A08 68-23427-26
SK-A1 Factory Standard Factory Standard 200RD2T3TVLC
61-AMG24V 200RD2T3TVLC
61-AMG120/240V 91-101123-21

(-)P15AZ36 44-17402-44 RXAD-A08 68-23427-26
SK-A1 Factory Standard Factory Standard 200RD2T3TVLC
61-AMG24V 200RD2T3TVLC
61-AMG120/240V 91-101123-21

(-)P15AZ42 44-17402-45 RXAD-A08 68-23427-25
SK-A1 Factory Standard Factory Standard 200RD2T3TVLC
61-AMG24V 200RD2T3TVLC
61-AMG120/240V 91-101123-21

(-)P15AZ48 44-17402-45 RXAD-A08 68-23427-25
SK-A1 Factory Standard Factory Standard 200RD3T3TVLC
61-AMG24V 200RD3T3TVLC
61-AMG120/240V 91-101123-21

(-)P15AZ60 Factory Standard
RXAD-A08 68-23427-25
SK-A1 Factory Standard Factory Standard 200RD3T3TVLC
61-AMG24V 200RD3T3TVLC
61-AMG120/240V 91-101123-21

Weighted Sound Power Level (dBA)

UNIT SIZE –

LOW STAGE

STANDARD

VOLTAGE, SERIES

RATING (DBA)

125

RP15AZ18A

73

58.0

RP15AZ24A

72

73

56.6

RP15AZ30A

72

73

55.1

RP15AZ36A

73

74

51.2

RP15AZ42A

74

56.6

RP15AZ48A

74

57.3

RP15AZ60A

73

74

58.9

NOTE: Tested in accordance with AHRI Standard 270-08 (not listed in AHRI)

TYPICAL OCTAVE BAND SPECTRUM (dBA without tone adjustment)

250

500

1000

2000

4000

58.8

62.0

62.3

59.2

56.6

59.6

62.2

62.1

58.8

55.4

58.3

65.6

63.5

58.5

54.9

56.4

63.1

63.8

60.8

57.4

64.9

64.0

62.0

57.4

56.6

64.1

64.0

61.1

58.0

58.7

61.4

64.6

60.1

57.1

8000 50.5 50.8 48.5 56.5 50.4 56.5 53.7

6

Unit Dimensions RP15AZ

Unit Dimensions

MODEL NO.
(-)P15AZ18AJ2NA (-)P15AZ24AJ2NA (-)P15AZ30AJ2NA (-)P15AZ36AJ2NA (-)P15AZ42AJ2NA (-)P15AZ48AJ2NA (-)P15AZ60AJ2NA

H (Height) INCHES mm 25.00 635.00 25.00 635.00 35.00 889.00 39.00 990.60 39.00 990.60 39.00 990.60 51.00 1295.40

OPERATING L (Length) INCHES mm 29.75 755.65 29.75 755.65 33.75 857.25 33.75 857.25 33.75 857.25 33.75 857.25 35.75 908.05

W (Width) INCHES mm 29.75 755.65 29.75 755.65 33.75 857.25 33.75 857.25 33.75 857.25 33.75 857.25 35.75 908.05

H (Height) INCHES mm 27.90 708.66 27.90 708.66 38.35 974.09 42.35 1075.69 42.35 1075.69 42.35 1075.69 54.50 1384.30

SHIPPING L (Length) INCHES mm 33.25 844.55 33.25 844.55 37.64 956.06 37.64 956.06 37.64 956.06 37.64 956.06 39.37 1000.00

W (Width) INCHES mm 33.25 844.55 33.25 844.55 37.64 956.06 37.64 956.06 37.64 956.06 37.64 956.06 39.37 1000.00

[ ] Designates Metric Conversions

ST-A1226-02-00 7

Clearances RP15AZ

8

WALL

CLEARANCES
WALL

6 (152.4)

24 (609.6)
Service

12 (304.8)
6 (152.4)

WALL
24 (609.6) Service

12 (304.8)

6 (152.4)

12 (304.8)

24 (609.6)
Service

WALL
24 (609.6) Service

24 (609.6)
Service

18 (457.2)

24 (609.6)
24 recommended 6 minimum

NOTE: NUMBERS IN () = mm
IMPORTANT: When installing multiple units in an alcove, roof well or partially enclosed area, ensure there is adequate ventillation to prevent re-circulation of discharge air.

ST-A1225-01-00

Refrigerant Line Size Information RP15AZ

Refrigerant Line Size Information

SINGLE AND TWO-STAGE HEAT PUMPS

OUTDOOR UNIT ABOVE OR BELOW INDOOR UNIT

UNIT SIZE

LIQUID LINE SIZE

SUCTION LINE SIZE

0-15

16-25

EQUIVALENT LENGTH IN FEET

26-50

51-80

81-100

101-125

MAXIMUM VERTICAL SEPARATION/CAPACITY MULTIPLIER

1/4″

1/2″

15 / 1

25 / 0.99

50 / 0.98

75 / 0.97

60 / 0.94

40 / 0.93

5/16″

1/2″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

100 / 0.94

110 / 0.93

3/8″

1/2″

15 / 1

25 / 1

50 / 0.99

80 / 0.97

100 / 0.97

115 / 0.96

1/4″

5/8″

15 / 1

25 / 1

50 / 0.99

75 / 0.99

60 / 0.98

40 / 0.98

1.5 TON

5/16″

5/8″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

100 / 0.98

110 / 0.98

3/8″

5/8″

15 / 1

25 / 1

50 / 1

80 / 0.99

100 / 0.99

115 / 0.99

1/4″

3/4″

15 / 1

25 / 1

50 / 1

75 / 0.99

60 / 0.99

40 / 0.99

5/16″

3/4″

15 / 1

25 / 1

50 / 1

80 / 0.99

100 / 0.99

110 / 0.99

3/8″

3/4″

15 / 1

25 / 1

50 / 1

80 / 0.99

100 / 0.99

115 / 0.99

1/4″

5/8″

15 / 1

25 / 0.99

50 / 0.99

40 / 0.98

15 / 0.97

0 / 0.96

5/16″

5/8″

15 / 1

25 / 0.99

50 / 0.99

80 / 0.98

100 / 0.97

95 / 0.96

3/8″ 2 TON
1/4″

5/8″

15 / 1

25 / 1

50 / 0.99

80 / 0.98

100 / 0.97

100 / 0.96

3/4″

15 / 1

25 / 1

50 / 0.99

40 / 0.99

15 / 0.99

0 / 0.99

5/16″

3/4″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

100 / 0.99

95 / 0.99

3/8″

3/4″

15 / 1

25 / 1

50 / 1

80 / 0.99

100 / 0.99

1/4″

5/8″

15 / 1

25 / 0.99

50 / 0.98

0 / 0.97

0 / 0.96

0 / 0.94

5/16″

5/8″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

85 / 0.96

75 / 0.94

3/8″ 2.5 TON
1/4″

5/8″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

95 / 0.96

90 / 0.94

3/4″

15 / 1

25 / 1

50 / 0.99

0 / 0.99

0 / 0.98

5/16″

3/4″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

85 / 0.98

75 / 0.98

3/8″

3/4″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

95 / 0.98

90 / 0.98

5/16″

5/8″

15 / 1

25 / 0.99

50 / 0.97

75 / 0.95

65 / 0.94

45 / 0.92

5/16″

3/4″

15 / 1

25 / 1

50 / 0.99

75 / 0.98

65 / 0.98

45 / 0.97

3/8″

5/8″

15 / 1

25 / 0.99

50 / 0.97

80 / 0.95

85 / 0.94

80 / 0.92

3 TON

3/8″

3/4″

15 / 1

25 / 1

50 / 0.99

80 / 0.98

85 / 0.98

80 / 0.97

3/8″

7/8″

15 / 1

25 / 1

50 / 1

80 / 0.99

85 / 0.99

80 / 0.99

1/2″

3/4″

15 / 1

25 / 1

50 / 0.99

80 / 0.98

100 / 0.98

125 / 0.97

1/2″

7/8″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

100 / 0.99

125 / 0.99

3/8″

3/4″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

70 / 0.96

3/8″ 3.5 TON
1/2″

7/8″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

70 / 0.98

3/4″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

100 / 0.97

125 / 0.96

1/2″

7/8″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

100 / 0.97

125 / 0.96

3/8″

3/4″

15 / 1

25 / 0.99

50 / 0.98

75 / 0.97

70 / 0.96

60 / 0.95

3/8″ 4 TON
1/2″

7/8″

15 / 1

25 / 1

50 / 0.99

75 / 0.99

70 / 0.98

60 / 0.98

3/4″

15 / 1

25 / 0.99

50 / 0.98

80 / 0.97

100 / 0.96

125 / 0.95

1/2″

7/8″

15 / 1

25 / 1

50 / 0.99

80 / 0.99

100 / 0.98

125 / 0.98

3/8″

3/4″

15 / 1

25 / 0.99

50 / 0.97

65 / 0.95

45 / 0.94

30 / 0.92

3/8″ 5 TON
1/2″

7/8″

15 / 1

25 / 0.99

50 / 0.99

65 / 0.98

45 / 0.97

30 / 0.96

3/4″

15 / 0.99

25 / 0.99

50 / 0.97

80 / 0.95

100 / 0.94

120 / 0.92

1/2″

7/8″

15 / 1

25 / 0.99

50 / 0.99

80 / 0.98

100 / 0.97

120 / 0.96

NOTES: 1) Maximum Equivalent Line Length may not exceed 250′. 2) Maximum Actual Line Length may not exceed 200′. 3) Light Grey shaded areas are considered long line and may require accessories as recommended in Long Line Set Guide. 4) DO NOT use suction line traps in the suction riser as this adds additional unwanted pressure drop in the system.

126-150
20 / 0.91 115 / 0.91 115 / 0.95 20 / 0.98 115 / 0.98 115 / 0.98 20 / 0.99 115 / 0.99 115 / 0.98
0 / 0.95 85 / 0.95 95 / 0.95 0 / 0.98 85 / 0.98 95 / 0.98 0 / 0.93 60 / 0.93 85 / 0.93 0 / 0.97 60 / 0.97 85 / 0.97 30 / 0.9 30 / 0.96 75 / 0.9 75 / 0.96 75 / 0.98 130 / 0.96 130 / 0.99 65 / 0.95 65 / 0.98 125 / 0.94 125 / 0.94 50 / 0.94 50 / 0.97 125 / 0.94 125 / 0.97 15 / 0.9 15 / 0.96 115 / 0.9 115 / 0.96

9

Refrigerant Line Size Information RP15AZ

Refrigerant Line Size Information (Con’t.)

SINGLE AND TWO-STAGE HEAT PUMPS

OUTDOOR UNIT ABOVE OR BELOW INDOOR UNIT

UNIT SIZE

LIQUID LINE SIZE

SUCTION LINE SIZE

0-5

5.5-8

EQUIVALENT LENGTH IN METERS

8.5-15

15.5-24

24.5-30

30.5-38

MAXIMUM VERTICAL SEPARATION/CAPACITY MULTIPLIER

1/4″

1/2″

5 / 1

8 / 0.99

15 / 0.98

23 / 0.97

18 / 0.94

12 / 0.93

5/16″

1/2″

5 / 1

8 / 0.99

15 / 0.98

24 / 0.97

30 / 0.94

34 / 0.93

3/8″

1/2″

5 / 1

8 / 1

15 / 0.99

24 / 0.97

30 / 0.97

35 / 0.96

1/4″

5/8″

5 / 1

8 / 1

15 / 0.99

23 / 0.99

18 / 0.98

12 / 0.98

1.5 TON

5/16″

5/8″

5 / 1

8 / 1

15 / 0.99

24 / 0.99

30 / 0.98

34 / 0.98

3/8″

5/8″

5 / 1

8 / 1

15 / 1

24 / 0.99

30 / 0.99

35 / 0.99

1/4″

3/4″

5 / 1

8 / 1

15 / 1

23 / 0.99

18 / 0.99

12 / 0.99

5/16″

3/4″

5 / 1

8 / 1

15 / 1

24 / 0.99

30 / 0.99

34 / 0.99

3/8″

3/4″

5 / 1

8 / 1

15 / 1

24 / 0.99

30 / 0.99

35 / 0.99

1/4″

5/8″

5 / 1

8 / 0.99

15 / 0.99

12 / 0.98

5 / 0.97

0 / 0.96

5/16″

5/8″

5 / 1

8 / 0.99

15 / 0.99

24 / 0.98

30 / 0.97

29 / 0.96

3/8″ 2 TON
1/4″

5/8″

5 / 1

8 / 1

15 / 0.99

24 / 0.98

30 / 0.97

30 / 0.96

3/4″

5 / 1

8 / 1

15 / 0.99

12 / 0.99

5 / 0.99

0 / 0.99

5/16″

3/4″

5 / 1

8 / 1

15 / 0.99

24 / 0.99

30 / 0.99

29 / 0.99

3/8″

3/4″

5 / 1

8 / 1

15 / 1

24 / 0.99

30 / 0.99

1/4″

5/8″

5 / 1

8 / 0.99

15 / 0.98

0 / 0.97

0 / 0.96

0 / 0.94

5/16″

5/8″

5 / 1

8 / 0.99

15 / 0.98

24 / 0.97

26 / 0.96

23 / 0.94

3/8″ 2.5 TON
1/4″

5/8″

5 / 1

8 / 0.99

15 / 0.98

24 / 0.97

29 / 0.96

27 / 0.94

3/4″

5 / 1

8 / 1

15 / 0.99

0 / 0.99

0 / 0.98

5/16″

3/4″

5 / 1

8 / 1

15 / 0.99

24 / 0.99

26 / 0.98

23 / 0.98

3/8″

3/4″

5 / 1

8 / 1

15 / 0.99

24 / 0.99

29 / 0.98

27 / 0.98

5/16″

5/8″

5 / 1

8 / 0.99

15 / 0.97

23 / 0.95

20 / 0.94

14 / 0.92

5/16″

3/4″

5 / 1

8 / 1

15 / 0.99

23 / 0.98

20 / 0.98

14 / 0.97

3/8″

5/8″

5 / 1

8 / 0.99

15 / 0.97

24 / 0.95

26 / 0.94

24 / 0.92

3 TON

3/8″

3/4″

5 / 1

8 / 1

15 / 0.99

24 / 0.98

26 / 0.98

24 / 0.97

3/8″

7/8″

5 / 1

8 / 1

15 / 1

24 / 0.99

26 / 0.99

24 / 0.99

1/2″

3/4″

5 / 1

8 / 1

15 / 0.99

23 / 0.98

30 / 0.98

38 / 0.97

1/2″

7/8″

5 / 1

8 / 1

15 / 0.99

23 / 0.99

30 / 0.99

38 / 0.99

3/8″

3/4″

5 / 1

8 / 0.99

15 / 0.98

24 / 0.97

21 / 0.96

3/8″ 3.5 TON
1/2″

7/8″

5 / 1

8 / 1

15 / 0.99

24 / 0.99

21 / 0.98

3/4″

5 / 1

8 / 0.99

15 / 0.98

23 / 0.97

30 / 0.97

38 / 0.96

1/2″

7/8″

5 / 1

8 / 0.99

15 / 0.98

23 / 0.97

30 / 0.97

38 / 0.96

3/8″

3/4″

5 / 1

8 / 0.99

15 / 0.98

23 / 0.97

21 / 0.96

18 / 0.95

3/8″ 4 TON
1/2″

7/8″

5 / 1

8 / 1

15 / 0.99

23 / 0.99

21 / 0.98

18 / 0.98

3/4″

5 / 1

8 / 0.99

15 / 0.98

23 / 0.97

30 / 0.96

38 / 0.95

1/2″

7/8″

5 / 1

8 / 1

15 / 0.99

23 / 0.99

30 / 0.98

38 / 0.98

3/8″

3/4″

5 / 1

8 / 0.99

15 / 0.97

20 / 0.95

14 / 0.94

9 / 0.92

3/8″ 5 TON
1/2″

7/8″

5 / 1

8 / 0.99

15 / 0.99

20 / 0.98

14 / 0.97

9 / 0.96

3/4″

5 / 0.99

8 / 0.99

15 / 0.97

23 / 0.95

30 / 0.94

37 / 0.92

1/2″

7/8″

5 / 1

8 / 0.99

15 / 0.99

23 / 0.98

30 / 0.97

37 / 0.96

NOTES: 1) Maximum Equivalent Line Length may not exceed 76 Meters. 2) Maximum Actual Line Length may not exceed 61 Meters. 3) Light Grey shaded areas are considered long line and may require accessories as recommended in Long Line Set Guide. 4) DO NOT use suction line traps in the suction riser as this adds additional unwanted pressure drop in the system.

38.5-46
6 / 0.91 35 / 0.91 35 / 0.95 6 / 0.98 35 / 0.98 35 / 0.98 6 / 0.99 35 / 0.99 35 / 0.98 0 / 0.95 26 / 0.95 29 / 0.95 0 / 0.98 26 / 0.98 29 / 0.98 0 / 0.93 18 / 0.93 26 / 0.93 0 / 0.97 18 / 0.97 26 / 0.97
9 / 0.9 9 / 0.96 23 / 0.9 23 / 0.96 23 / 0.98 40 / 0.96 40 / 0.99 20 / 0.95 20 / 0.98 38 / 0.94 38 / 0.94 15 / 0.94 15 / 0.97 38 / 0.94 38 / 0.97 5 / 0.9 5 / 0.96 35 / 0.9 35 / 0.96

10

Performance Data RP15AZ

Performance Data @ AHRI Standard Conditions Cooling

DESIGNATED TESTED COMBINATION (DTC)

OUTDOOR UNIT

AIR HANDLER

TOTAL CAPACITY BTU/H [kW]

NET SENSIBLE BTU/H [kW]

NET LATENT SEER2 EER2 BTU/H [kW]

INDOOR CFM [L/S]

47 DEGREE HEATING CAPACITY BTU/H [KW]

47 DEGREE
COP

17 DEGREE HEATING CAPACITY BTU/H [KW]

17 REGION DEGREE IV
COP HSPF2

(-)P15AZ18AJ2N RH2TZ2417STANN 17,100 [5.0] 13,100 [3.8] 4,000 [1.2] 15.2 11.7 625 [295.0] 17,100 [5.0] 3.87 11,600 [3.4] 2.6 7.8

(-)P15AZ24AJ2N RH2TZ2417STANN 22,800 [6.7] 17,400 [5.1] 5,400 [1.6] 15.2 11.7 775 [365.8] 22,600 [6.6] 3.88 15,600 [4.6] 2.8 7.8

(-)P15AZ30AJ2N RH2TZ3617STANN 28,400 [8.3] 21,800 [6.4] 6,600 [1.9] 15.2 11.7 900 [424.8] 28,400 [8.3] 3.62 19,700 [5.8] 2.6 7.8

(-)P15AZ36AJ2N RH2TZ3617STANN 34,200 [10.0] 26,200 [7.7] 8,000 [2.3] 15.2 11.7 1,050 [495.5] 34,200 [10.0] 3.62 24,400 [7.2] 2.7 7.8

(-)P15AZ42AJ2N RH2TZ4821STANN 40,000 [11.7] 30,500 [8.9] 9,500 [2.8] 15.2 11.7 1,325 [625.3] 39,500 [11.6] 3.95 28,200 [8.3] 2.9 7.8

(-)P15AZ48AJ2N RH2TZ4821STANN 45,500 [13.3] 35,000 [10.3] 10,500 [3.1] 15.2 11.7 1,450 [684.3] 45,000 [13.2] 3.92 33,200 [9.7] 2.9 7.8

(-)P15AZ60AJ2N RH2TZ6024STANN 57,000 [16.7] 43,500 [12.7] 13,500 [4.0] 15.2 11.7 1,800 [849.5] 57,000 [16.7] 4.04 42,500 [12.5] 3.0 7.8

NOTE: This data includes DTC (Designated Test Combination) ratings and is for reference purposes only. A full listing of official ratings and system match- ups, along with downloadable certificates, will be accessible from the AHRI website: www.ahridirectory.org later this year.

[ ] Designates Metric Conversions

11

GENERAL TERMS OF LIMITED WARRANTY
Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty.
For complete details of the Limited and Conditional Warranties, including applicable terms and conditions, contact your local contractor or the Manufacturer for a copy of the product warranty certificate.

Conditional Parts (Registration Required)……………………………Ten (10) Years

Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and Local codes, regulations, and practices.

© 2023 Rheem Manufacturing Company. Rheem trademarks owned by Rheem Manufacturing Company. In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.

5600 Old Greenwood Road Fort Smith, Arkansas 72908 · www.rheem.com

125 Edgeware Road, Unit 1 Brampton, Ontario · L6Y 0P5 · rheem.ca

PRINTED IN U.S.A. 10/23 QG FORM NO. P11-827 REV. 2