Costway HW71562 Outdoor Daybed with Canopy Instruction Manual

Costway HW71562 Outdoor Daybed with Canopy

Product Information

Specifications:

• Model: HW71562
• Manufacturer: Costway
• Available Offices: USA, AUS, ITA, POL, GBR, DEU, FRA, ESP

Product Usage Instructions

Before You Start:

This product comes with important safety information. Please read the instruction booklet before use and keep it for future reference.

Assembly Instructions:

1. Identify the different frames and components as labeled in the manual.
2. Use the provided bolts, washers, and nuts to connect the different frame parts as instructed.
3. Secure the seat cushion and pillows in place.
4. Attach the canopy frame following the specified steps.

Usage Guidelines:

Ensure all connections are tight and secure before use. Avoid exceeding the maximum weight capacity specified by the manufacturer. Keep the product clean and dry to maintain its condition.

FAQs

Q: Where can I reach customer service for assistance?

A: You can contact our friendly customer team at the following addresses:

• USA: cs.us@costway.com
• AUS: cs.au@costway.com
• GBR: cs.uk@costway.com
• ITA: cs.it@costway.com
• POL: sklep@costway.com
• DEU: cs.de@costway.com
• FRA: cs.fr@costway.com
• ESP: cs.es@costway.com

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

OVERVIEW

Notice

1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all the screws, adjust it on a flat ground, and tighten up all screws again.
6. Note: If one or some screws are fully tightened during assembly, chances are the others will not align with the holes. However, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.

Part List

Hardware List

INSTALLATION

1. Connect Right frame (A) & Side right frame (C) with Bolt (3) & Washers (7).
2. Connect Left frame (B) & Side left frame (T) with Bolt (3) & Washers (7).
3. Connect Seat frame (D) & Seat frame (D) with Bolt (5) & Washers (7) & Nut (6).
4. Connect Seat frame (D) & Seat frame (D) with Bolt (5) & Washers (7) & Nut (6).
5. Connect part from Step 3 & Part from Step 4 with Bolt (5) & Washers (7) & Nut (6).
6. Connect the Front Right frame (E) & Front Left frame (F) with Bolt (3) & Washers (7).
7. Connect Back Right frame (G) & Back Left frame (H) with Bolt (4) & Washers (7).
8. Connect part from Step 1 & Part from Step 6 with Bolt (3) & Washers (7).
9. Connect part from Step 8 & Part from Step 5 with Bolt (3) & Washers (7).
10. Connect part from Step 9 & Part from Step 7 with Bolt (3), (4) & Washers (7).
11. Connect part from Step 10 & Part from Step 2 with Bolt (3), (4) & Washers (7)
12. Connect part from Step 11 & Leg frame (I) with Bolt (1) & Washers (7)
13. Connect part from Step 12 & Plastic feet corner (8) & Plastic feet (9) with Bolt (2).
14. Connect part from Step 13 & Part from Step 1 & Part from Step2 & Part from Step 7 with Bolt (4) & Washers (15).
15. Connect part from Step 14 & Arm right frame (L) & Arm left frame (M) with Bolt (2) & Washers (7)
16. : Connect the Canopy frame (N) & Canopy frame (R) with Screw (11).
17. Connect Canopy frame (O) & Canopy frame (R) with Screw (11).
18. Connect Canopy frame (P) & Canopy frame (R) with Screw (11).
19. Connect the part from Step 16, the part from Step 17 & the part from Step 18 with Waterproof canopy (U).
20. Connect part from Step 15 & Part from Step 19 with Bolt (3) & Washers (7), (10).
21. Connect part from Step 20 with Gas bar (12).
22. Put on Seat cushion (J) & Pillow (K) to complete Daybed.
23. Combination and Arrangement

Return / Damage Claim Instructions

• DO NOT discard the box / original packaging.
  • In case a return is required, the item must be returned in the original box. Without this, your return will not be accepted.
• Take a photo of the box markings.
  • A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
• Take a photo of the damaged part (if applicable).
  • A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
• Send us an email with the images requested.
  • Email us directly from the marketplace where your item was purchased with the attached images and a description of your claim.

CONTACT INFORMATION

• USA office: Fontana
• AUS office: Truganina
• ITA office: Milano
• POL office: Gdańsk
• DEU office: FDS
• GmbH, Neuer Höltigbaum 36, 22143 Hamburg, Deutschland
• FRA office: Saint Vigor d’Ymonville
• GBR office: FDS Corporation Limited, Unit 4, Blackacre Road, Great Blakenham, Ipswich, Ip6 0FL, United Kingdom

If you’re having difficulty, our friendly customer team is always here to help.

• USA:cs.us@costway.com
• AUS:cs.au@costway.com
• GBR:cs.uk@costway.com
• ITA:cs.it@costway.com
• POL:sklep@costway.com
• DEU:cs.de@costway.com
• FRA:cs.fr@costway.com
• ESP:cs.es@costway.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>