FORCE 74003 Plastic Box Instruction Manual
- September 2, 2024
- FORCE
Table of Contents
FORCE 74003 Plastic Box
INSTRUCTION
- Clean the place of puncture properly with sandpaper.
- Always clean a place bigger than a patch. Apply a thin layer of glue and let it dry. Avoid contact with water. When the glue is dry, remove the foil from the patch and stick it in the place of the puncture. Do not touch the back side of the patch.
- Press the patch by finger until the patch is glued properly.
CONTENT
- 1 x oval shaped (24 x 35 mm, 2 x circular (diameter 15 mm), 2 x circular (diameter 25 mm), 1 x 8 ml tube of glue, 1 x sandpaper (40 x 25 mm)
- DANGER H336 May cause drowsiness or dizziness. P101
- If medical advice is needed, have a product container or label at hand. P102 Keep out of reach of children. P261
- Avoid breathing vapors. P271 Use only outdoors or in a well-ventilated area. P312 Call a POISON
- CENTER/doctor if you feel unwell. P403+P233 Store in a well-ventilated place. Keep the container tightly closed.
- P405 Store locked up. P501 Dispose of contents/container to an approved waste disposal facility.
- Contains: methylcyclohexane.
SCAN
www.kckcyklosport.cz,
www.force.cz
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>