YARD FORCE LX SPP10 100W Solar Flex Panel Instructions

LX SPP10/ LX SPP20
100W/ 200W SOLAR FLEX PANEL
Original Instructions

SYMBLOS

Read the instructions for use before use!
The product complies with the applicable European directives and an evaluation method of conformity for these directives was done.
**** WEEE symbol. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

GENERAL SAFETY WARNINGS

• Do not bend the solar panel, it will damage the solar panel.
• Do not clean the solar panel with water, with the wet cloth gently scrub it.
• Do not use or store the solar panel near sources of heat such as fire or heater.
• Do not put the solar panel into a fire or apply direct heat to it.
• Do not pierce the solar panel casing with a nail or other sharp object, break it open with a hammer, or step on it.
• Do not attempt to disassemble the solar panel in any way.
• This product cannot contact with strong corrosive objects.
• Do not charge automotive battery directly. For other batteries, please follow the charging requirments on the specification.

DESCRIPTION OF PRODUCT

PACKAGE CONTENT LIST

TECHNICAL DATA

Output port
USB-A| 5 V 12 W Max (1 Port)| 5V 12 W Max (1 Port)
USB-A QC| 5-12 V 18 W (1 Port)| 5-12 V 18 W (1 Port)
Type C| Max 65 W| Max 65 W
DC 5521| |
Anderson interface| |
Weight| 4.2 kg| 7.9 kg

OPERATION

Using Your Product
Unfold solar panel, use the legs to support it, align the panel directly to the sun. the blue LED on the output box will be ON if solar panel is working correctly NOTE:

• The solar panel can’t store electricity directly. You will need a power station to store power or connect the solar panel directly to your devices to charge.
• Charging efficiency is subject to sunlight intensity.
• Keep your phones and tablets away from direct sunlight. Excessive heat may cause damage.
• 100/ 200W refers to the power of the solar panel, which is not equal to the actual power of the output ports. There will be some power loss when solar energy is transferred into electrical energy, so the actual power of the output ports will be less than the power of the solar panel.
• Solar panel charge conversion depends on the angle of direct sunlight, temperature, weather and charging time.
• Always face the front side of solar panel toward the sun to get maximum efficiency.
• Please make sure the solar panel is completely unfolded when using.
• Solar panel cannot store power, can only convert the sun power to electricity energy.

MAINTENANCE AND STORAGE

CLEAN
Caution! Protect the product from direct contact with water, and make sure that water doesn’t get the opportunity to get in. do not use the device on the rainy days.

• Always clean the product thoroughly after each use with a damp cloth, sponge or brush.
• Avoid oil and grease contamination (especially to gripping parts).
• Never use aggressive cleaning agents, solvents or chemicals for cleaning. Permanent damage to plastic parts could occur.

STORAGE

• For safety reasons worn or damaged parts should be replaced.
• Store in the original packaging (if possible) in a clean, dry, dark and frost-free place protected from dust and out of reach of children.
• Cover unit with a suitable protective cover that does not retain moisture. Do not use sheet plastic as a dust cover. A nonporous cover will trap moisture around the machine, promoting rust and corrosion.
• The ideal storage temperature is between 5 and 30 °C.

DISPOSAL

• Dispose your device, accessories and packaging in accordance with the requirements of environmental protection into the recycling collection center.

DECLARATION OF CONFORMITY

To the provisions of Council Directives
We
MEROTEC GmbH
Otto-Brenner-Str. 8
47877 Willich
Germany
Declare that the product:
Machine Description: Solar flex panel
LX SPP10/ DS-100W
LX SPP20/ DS-200W
Complies with the essential health and safety requirements of the following directives:
Electromagnetic Compatibility Directive 2014/30/EU
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)
Standards and technical specification referred to:
EN 55032:2015/ A11:2020
EN 55035:2017+A11:2020
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013/ A2:2021

MEROTEC GmbH
Otto-Brenner-Str. 8, 47877 Willich, Germany

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>