Flex-Force 86910 Power System 1 AMP 60V MAX Battery Charger Instruction Manual

Form No. 3466-655 Rev A
Operator’s Manual
Flex-Force Power System®
1 AMP 60V MAX Battery Charger
Model No. 86910—Serial No. 324000000 and Up

Introduction

This battery charger is intended to be used by residential homeowners.
This charger is designed to charge only Flex-Force 60V lithium-ion battery packs. It is not designed to charge any other batteries. Using this product for purposes other than its intended use could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely.
Whenever you need service, genuine parts, or additional information, contact an Authorized Service Dealer or distributor, or the tool manufacturer’s Customer Service, and have the model and serial numbers of your product ready. Figure 1 identifies the location of the model and serial numbers on the product. Write the numbers in the space provided.
Important: With your mobile device, you can scan the QR code on the serial number decal (if equipped) to access warranty, parts, Operator’s Manuals, and other product information.

1. Model and serial number location.

Model No……………..
Serial No……………..

Safety-Alert Symbol

The safety-alert symbol (Figure 2) shown in this manual and on the machine identifies important safety messages that you must follow to prevent accidents.

Figure 2
Safety-alert symbol

The safety-alert symbol appears above information that alerts you to unsafe actions or situations and is followed by the word DANGER, WARNING, or CAUTION.
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
This manual uses two other words to highlight information. Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention.

Safety
IMPORTANT SAFETY INSTRUCTIONS

1. SAVE THESE INSTRUCTIONS—This manual contains important safety and operating instructions for Flex-Force 60V lithium-ion battery packs and Flex-Force 60V lithium-ion battery chargers.
2. Before using the battery charger or battery pack, read all the instructions and cautionary markings on the battery charger, battery pack, and product using the battery pack.
3. CAUTION—To reduce risk of injury, charge Flex-Force 60V lithium-ion battery packs with Flex-Force 60V lithium-ion battery chargers only. Other brands of battery packs may burst, causing personal injury and damage.
4. WARNING—Plugging the battery charger into an outlet that is not 220 to 240V can cause a fire or electric shock. Do not plug the battery charger into an outlet other than 220 to 240V. For a different style of connection, use an attachment plug adapter of the proper configuration for the power outlet if needed.

I. Training

1. Do not allow children or untrained people to operate or service this device. Allow only people who are responsible, trained, familiar with the instructions, and physically capable to operate or service the device.
2. Do not allow children to use or play with the battery pack or battery charger; local regulations may restrict the age of the operator.

II. Preparation

1. Use appliances only with specifically designated battery packs.
   Using other types of battery packs may create a risk of injury and/or fire.

2. Do not use a damaged or modified battery pack or battery charger.
   It may exhibit unpredictable behavior, resulting in fire, explosion, or risk of injury.

3. If the supply cord to the battery charger is damaged, contact an Authorized Service Dealer to replace it.

III. Operation

1. Do not use non-rechargeable batteries.

2. Charge the battery pack with only the battery charger specified by the tool manufacturer. A charger suitable for 1 type of battery pack may create a risk of fire when used with another battery pack.

3. Charge the battery pack in a well-ventilated area only.

4. Follow all charging instructions and do not charge the battery pack outside of the temperature range specified in the instructions. Otherwise, you may damage the battery pack and increase the risk of fire.

5. Under abusive conditions, the battery pack may eject liquid; avoid contact. If you accidently come into contact with the liquid, flush with water. If the liquid contacts your eyes, seek medical help. Liquid ejected from the battery pack may cause irritation or burns.

6. Do not expose a battery pack or tool to fire or excessive temperature.
   Exposure to fire or temperature above 130°C (265°F) may cause explosion.

7. CAUTION—A mistreated battery pack may present a risk of fire, explosion, or chemical burn.
   • Do not disassemble the battery pack.
   • Replace the battery pack with a genuine Flex-Force battery pack only; using another type of battery pack may cause a fire or risk of injury.
   • Keep battery packs out of the reach of children and in the original packaging until you are ready to use them.

IV. Maintenance and Storage

1. Do not allow children to clean or maintain the battery charger.
2. When the battery pack is not in use, keep it away from metal objects such as paper clips, coins, keys, nails, and screws that can make a connection from 1 terminal to another. Shorting the battery terminals may cause burns or a fire.
3. Do not attempt to repair the battery pack or battery charger. Have an Authorized Service Dealer or distributor perform service on the battery pack or battery charger using identical replacement parts to ensure that the product is safely maintained.
4. Check with local codes for possible special battery disposal instructions.

SAVE THESE INSTRUCTIONS

Product Overview

Specifications
Battery Charger

Appropriate Temperature Ranges

*Charging time will increase if you do not charge the battery within this range. Store the tool, battery pack, and battery charger in an enclosed clean, dry area.
Store the machine, battery pack, and battery charger in an enclosed clean, dry area.

Operation

Charging the Battery Pack
Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to Specifications (page 6).
Note: At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators).

1. Line up the cavity in the battery pack (Figure 3) with the tongue on the charger.1. Battery pack cavity
   2. Battery pack terminals
   3. Battery-charge-indicator button
   4. LED indicators (current charge)
   5. Handle

2. Slide the charger into the battery pack until it is fully seated (Figure 3).

3. To remove the battery pack, slide the charger backward out of the battery pack.

4. Refer to the following table to interpret the LED indicator light on the battery charger.

temperature range
Red blinking| Battery pack charging fault*

*Refer to Troubleshooting (page 10) for more information.
Important: The battery can be left on the charger for short periods between uses.
If the battery will not be used for longer periods, remove the battery from the charger; refer to Storage (page 9).

Maintenance

Maintenance and servicing are not required under normal conditions.
When you clean the surface of the equipment, wipe it only with a dry cloth.
Do not disassemble the equipment; if it is damaged, contact your Authorized Service Dealer or distributor.
Storage
Important: Store the charger only in temperatures that are within the appropriate range; refer to Specifications (page 6).
Important: If you are storing the charger for the off-season, ensure that it is unplugged and that there are no batteries installed.

• Disconnect the product from the power supply (i.e., remove the battery pack) and check for damage after use.
• Do not store the charger with the battery pack installed.
• Clean all foreign material from the product.
• Do not store any machine with the battery pack installed.
• When not in use, store the tool, battery pack, and battery charger out of the reach of children.
• Keep the tool, battery pack, and battery charger away from corrosive agents, such as garden chemicals and de-icing salts.
• To reduce the risk of serious personal injury, do not store the battery pack outside or in vehicles.
• Store the tool, battery pack, and battery charger in an enclosed clean, dry area.

Troubleshooting

Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself.

the appropriate temperature range.
2. The outlet that the battery charger is plugged into does not have power.| 1. Unplug the battery charger and move it to a place where it is dry and the temperature is between 5°C (41°F) and 40°C (104°F).
2. Contact your licensed electrician to repair the outlet.
The LED indicator light on the battery charger is blinking red.| 1. There is an error in the communication between the battery pack and the charger.
2. The battery pack is weak.| 1. Remove the battery pack from the battery charger, unplug the battery charger from the outlet, and wait 10 seconds. Plug the battery charger into the outlet again and place the battery pack on the battery charger. If the LED indicator light on the battery charger is still blinking red, repeat
this procedure again. If the LED indicator light on the battery charger is still blinking red after 2 attempts, properly dispose of the battery pack at a battery recycling facility.
2. Contact your authorized service dealer or distributor if the battery
is in warranty, or properly dispose of the battery pack at a battery recycling facility.

Notes:

………………….

Printed in China
All Rights Reserved

Documents / Resources

| Flex-Force 86910 Power System 1 AMP 60V MAX Battery Charger [pdf] Instruction Manual
86910 Power System 1 AMP 60V MAX Battery Charger, 86910, Power System 1 AMP 60V MAX Battery Charger, System 1 AMP 60V MAX Battery Charger, MAX Battery Charger, Battery Charger
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>