COMMSCOPE 860674608-006 Grip Anchor Cable Ladder Installation Guide
- September 2, 2024
- CommScope
Table of Contents
860674608-006 Grip Anchor Cable Ladder
“`html
Specifications
Manufacturer: CommScope, Inc.
Dimensions: Height: 8.25”, Length: 19.64”,
Width: [X.X]
Maximum Loading Capacity: 1000 lbs per eyebolt,
1000 lbs in any combination
Product Usage Instructions
1. General Notes
- All metric dimensions are in brackets [X.X].
- For patent info, visit https://www.cs-pat.com.
2. Design Notes
Prior to installing the appurtenance, identify any hazards or
obstructions to the climbing facility and safety climb. Additional
products may be needed to maintain safety. During installation,
take temporary and/or permanent precautionary measures to preserve
the climbing facility and safety climb.
3. Manufacturing/Special Requirements
Tighten all bolts securing flat plates using the turn-of-nut
method. Tighten all U-bolts with equal distance and force on each
leg using the turn-of-nut method.
4. Test
No specific test instructions provided.
5. Packaging
-
Packaging must meet CommScope requirements per document
IS-PL-3005. -
Printed documents should be placed inside a polybag and then in
a shipping container. -
Extra hardware may be supplied, bagged, and shipped.
FAQ
Q: What is the maximum loading capacity of the product?
A: The maximum loading capacity per eyebolt is 1000 lbs, and in
any combination, it is also 1000 lbs.
Q: Are there any specific safety precautions to consider during
installation?
A: Yes, it is important to identify any hazards or obstructions
before installation and take necessary precautionary measures to
maintain safety.
“`
4
3
1.0 GENERAL NOTES
1.1 ALL METRIC DIMENSIONS ARE IN BRACKETS [X. X]
1.2 FOR PATENT INFO: https://www.cs-pat.com
2.0 DESIGN NOTES
2.1 ANY HAZARDS OR OBSTRUCTIONS TO THE CLIMBING FACILITY AND SAFETY CLIMB MUST BE
IDENTIFIED PRIOR TO INSTALLING THE APPURTENANCE. ADDITIONAL PRODUCTS MAY BE
REQUIRED TO MAINTAIN THE INTEGRITY OF THE SAFETY CLIMB. DURING INSTALLATION,
TEMPORARY AND/OR PERMANENT PRECAUTIONARY MEASURES SHOULD BE TAKEN TO
PRESERVE THE CLIMBING FACILITY AND/OR SAFETY CLIMB.
D
3.0 MANUFACTURING/SPECIAL REQUIREMENTS 3.1 TIGHTEN ALL BOLTS SECURING FLAT PLATES BY THE TURN-OF-NUT METHOD. TIGHTEN ALL U-BOLTS
USING TURN-OF-NUT METHOD WITH ATTENTION TO LEAVE EQUAL DISTANCE AND EQUAL FORCE ON
EACH LEG OF THE U-BOLT.
4.0 TEST
5.0 PACKAGING
5.1 PACKAGING SHALL MEET COMMSCOPE REQUIREMENTS PER DOCUMENT IS-PL-3005
5.2 PRINTED DOCUMENT TO BE PLACED INSIDE POLYBAG AND THEN IN SHIPPING CONTAINER
5.3 EXTRA HARDWARE MAYBE SUPPLIED, BAGGED AND SHIPPED
2
7 11 10 9 8
1
REVISIONS
REV.
DESCRIPTION
DATE
APPROVED
A
INITIAL RELEASE
RY1002
EB1063
23OCT23 40181149CMO
B
QTY FOR 9674-1(ITEM 2) & GWL-05(ITEM 4) WAS 1EA, GWF05A(ITEM 3) & GN-05(ITEM 5) WAS 2EA; ADDED NOTE FOR EYEBOLT; CHG BOX FROM BX92 TO BXGB2
RY1002 19FEB24
EB1063 40188637CMO
D
6
C
1
C
5432 RECOMMENDED LOCATION 12
19.64 498.9
NOTE: -ANY ARRANGEMENTS OF THE EYEBOLTS IS ACCEPTABLE B
B
-MAXIMUM LOADING CAPACITY PER EYEBOLT = 1000 LBS
B
-MAXIMUM LOADING CAPACITY IN ANY COMBINATION = 1000 LBS
-NOT TO BE USED FOR HOISTING
-CABLE LADDER TO BE INSPECTED BY COMPETENT PERSON
TO ENSURE PROPER INSTALLATION PRIOR TO INSTALL
-DESIGNED TO BE UTILIZED ON “CL-0610-U” OR “CL-0620-U”
COMPONENT PART NUMBERS PROVIDED FOR ASSEMBLY PURPOSES; INDIVIDUAL COMPONENTS MAY BE SHIPPED AS PARTS WITHIN AN INCLUDED KIT.
PACKAGE
ITEM
PART NO.
DESCRIPTION
QTY.
WEIGHT
NOTE NO.
COMMSCOPE, INC. OF NORTH CAROLINA
TOLERANCES
1 PLACE .X[.X] ± 0.2[6.3]
3 PLACE.XXX[.X] ± 0.060[1.5]
2 PLACE .XX[.X] ± 0.12[3.0]
ANGLES ± 2°
SAP MATERIAL MASTER
860674608-006
1 MTC4164-020-00
20 INCH CROSSMEMBER GALV
1
6.14 LBS
FINISH
MATERIAL
2 9674-1
BOLT,EYE,5/8X3,STL,ZN PLD
2
0.08 LBS
3 GWF05A 4 GWL-05
GALV FLAT WASHER HARDENED 5/8″, 1.3OD
4
5/8″ GALV LOCK WASHER
2
0.04 LBS 0.03 LBS
B
NAME
DATE TITLE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES INTERPRET PER ANSI Y 14.5M-1994
5 GN-05
5/8″ GALV HEX NUT
4
A 6 GB-03145
3/8″ X 1-1/2″ GALV BOLT KIT
2
7 HKCLU.02
BACKING PLATE
2
8 GJB0380
8″ GALV J-BOLT KIT
4
9 GN-03
3/8″ GALV HEX NUT
4
10 GWL-03
3/8″ GALV LOCK WASHER
4
11 GWF-03
3/8″ GALV FLAT WASHER
4
12 MTC4164-LAB01
LABEL, GRIP ANCHOR, CABLE LADDER,006
1
0.08 LBS 0.07 LBS 0.95 LBS 0.23 LBS 0.02 LBS 0.01 LBS 0.01 LBS 0.01 LBS
C 2024 CommScope, Inc. Confidential
DENSITY MASS 9.98
VOLUME 39.24 SURFACE AREA 365.17
HEIGHT 8.25” LENGTH 19.64”
WIDTH
lbs/in³
CE RY1002 RW RY1002
23OCT23 02/21/2024
GRIP ANCHOR, CABLE LADDER,006
A
lbs
AD EB1063
02/26/2024
in³ in²
1:3 860674608-006 RE LMCDOWEL
03/05/2024
ECN 40188637CMO
SCALE DOCUMENT NO.
SIZE Auth Group INSL
MODEL
DRAWING
SHEET
C
VERSION
01
STATUS
RE
REVISION VERSION STATUS
A
01
RE
REVISION
B
1 OF 2
4
3
2
1
4 D
3
2
SIDE RAIL AND ANGLE MEMBER SOLD SEPARATELY
1
CL-0610-U OR CL0620-U SOLD SEPARATELY
D
C
C
ANGLE MEMBER SET-UP
SIDE RAIL AND ROUND MEMBER SOLD SEPARATELY
RECOMMENDED LOCATION
B
B
ROUND MEMBER SET-UP
NOTE: -ANY ARRANGEMENTS OF THE EYEBOLTS IS ACCEPTABLE
A
-MAXIMUM LOADING CAPACITY PER EYEBOLT = 1000 LBS -MAXIMUM LOADING CAPACITY IN ANY COMBINATION = 1000 LBS
-NOT TO BE USED FOR HOISTING
-CABLE LADDER TO BE INSPECTED BY COMPETENT PERSON
TO ENSURE PROPER INSTALLATION PRIOR TO INSTALL
-DESIGNED TO BE UTILIZED ON “CL-0610-U” OR “CL-0620-U”
4
3
COMMSCOPE, INC. OF NORTH CAROLINA
TITLE
GRIP ANCHOR, CABLE LADDER,006
A
SIZE
C
C 2024 CommScope, Inc. Confidential
SCALE
1:5
DOCUMENT NO.
860674608-006
VERSION
01
DRAWING STATUS
RE
REVISION
B
SHEET
2 OF 2
2
1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>