ASUS PEN SA300 User Guide
- June 6, 2024
- Asus
Table of Contents
- Getting to know your ASUS Pen (Active stylus)
- Inserting the battery
- Replacing the tip
- Convenient storage
- Replacing the holder
- Package contents
- Getting to know your ASUS Pen (Active Stylus)
- Notices
- Technical Support
- ASUS COMPUTER INTERNATIONAL (America)
- Technical Support
- ASUS COMPUTER GmbH (Germany and Austria)
- Technical Support
- Documents / Resources
ASUS PEN SA300
Getting to know your ASUS Pen (Active stylus)
Inserting the battery
Replacing the tip
Convenient storage
WARNING! Keep the magnetic attachment away from external storage drives and cards with magnetic strips to prevent demagnetization.
Replacing the holder
Package contents
- ASUS Pen (Model Name: Active Stylus SA300) x 1
- AAAA battery x 1
- Magnetic pen holder x 2
- Replacement tip x 1
Getting to know your ASUS Pen (Active Stylus)
Inserting the battery
- Remove the top half of the stylus.
- Remove the sticker and insert the battery, noting the correct polarity.
- Return the top half of the stylus into place.
Replacing the tip
- Use your fingernails to grab the tip and pull it out.
- Insert a replacement tip into the stylus.
Replacing the pen holder
Remove the magnetic pen holder by pulling it straight out from the stylus and
replacing it with a new one.
Notices
Simplified EU Declaration of Conformity:
ASUSTeK Computer Inc. hereby declares that this device is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU. Full text of EU declaration of conformity available at:
www.asus.com/support.
CE RF:
Function | Frequency | H-field strength (dBuA/m) |
---|---|---|
Active stylus | 250 | -10.49 BuA/m |
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
EQUIPMENT AUTHORIZATION REQUIREMENT.
Devices operating below 490 kHz in which all emissions are at least 40 dB
below the limits in §15.209 shall be verified pursuant to the procedures in
Subpart J of part 2 of this chapter prior to marketing. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the equipment.
Compliance Statement of Innovation, Science, and Economic Development
Canada (ISED)
This device complies with Innovation, Science, and Economic Development
Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause
undesired operation of the device.
Translation:
This is a Class B product based on the standard of the VCCI Council. If this
is used near a radio or television receiver in a domestic environment, it may
cause radio interference. Install and use the equipment according to the
instruction manual.
KC: Korea Warning Statement
This wireless/radio equipment has a possibility of radio interference
during operation.
This wireless/radio equipment can’t be used for services of safety in human
life because it has a possibility of radio interference.
ASUS contact information
ASUSTeK COMPUTER INC.
Address: 1 F., No. 15, Lide Rd., Beitou Dist.,
Taipei City 112, Taiwan
Telephone: +886-2-2894-3447
Fax: +886-2-2890-7798
Web site: https://www.asus.com
Technical Support
Telephone: +86-21-38429911
Online support: https://qr.asus.com/techsery
ASUS COMPUTER INTERNATIONAL (America)
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Telephone: +1-510-739-3777
Fax: +1-510-608-4555
Web site: https://www.asus.com/us/
Technical Support
Support fax: +1-812-284-0883
Telephone: +1-812-282-2787
Online support: https://
ar.asus.com/techsery
ASUS COMPUTER GmbH (Germany and Austria)
Address: Harkortstrasse 21-23, 40880 Ratingen, Germany
Web site: https://www.asus.com/de
Online contact: https://www.asus.
com/support/Product/ContactUs/Services/buestionform/?lang=de-
de
Technical Support
Telephone (DE): +49-2102-5789557
Telephone (AT): +43-1360-2775461
Online support: https://www.asus.com/
de/support
Documents / Resources
| ASUS
ASUS PEN
SA300
[pdf] User Guide
ASUS, PEN, SA300, Active Stylus
---|---
References
- ÐžÑ„Ð¸Ñ†Ð¸Ð°Ð»ÑŒÐ½Ð°Ñ Ñлужба поддержки | ASUS РоÑÑии
- Official Support | ASUS Global
- ASUS в СÐГ
- ASUS Global
- ASUS Global
- ASUS Deutschland
- ASUS USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>