JENNAIR W11680101A Dishwasher User Guide
- September 2, 2024
- JENNAIR
Table of Contents
JENNAIR W11680101A Dishwasher
Specifications
- Brand: JennAir
- Model: Dishwasher
- Recommended Loading: 14 Place Settings
- Location: Benton Harbor, MI / Mississauga, Ontario
Product Usage Instructions
Product Registration & Warranty Information
Locate the QR code on your product’s serial tag. Register to access warranty
information and receive important notifications by scanning the Photo
Registration Card or QR code.
Important Safety Instructions
Before installing or operating the appliance, read the safety and
installation instructions provided to reduce the risk of fire, electric shock,
or injury.
User Maintenance Instructions
Clean the filter regularly, especially if it’s stuck on food. Replace the
filter plate if needed. Ensure proper seating of the filter plate and filter
cup. Do not operate the dishwasher with loose or missing filters.
FAQ
Q: What should I do if the dishwasher doesn’t start?
A: Make sure the door is closed within 4 seconds for top control models. Check
for any error codes or issues with power supply.
QUICK START GUIDE JENNAIR® DISHWASHER
PRODUCT REGISTRATION & OWNER INFORMATION
-
YOUR QR CODE UNLOCKS… product registration and warranty information, installation instructions, how-to videos, and additional accessories to get the most out of your product. If you purchased a smart appliance, your QR code will provide instructions on how to download the app and connect. You can access the full Installation, User Maintenance and Operating Instructions, Warranty details, and more by visiting our website at www.jennair.com or www.jennair.ca. This may save you the cost of a service call. To receive a free printed copy of the information online, call us at 1-800-536-6247 (U.S.A.) /1-800-536-6247 (Canada) or write to us at:
-
JennAir Brand Home Appliances Customer eXperience Center 533 Benson Road
Benton Harbor, MI 49022-2692
JennAir Brand Home Appliances Customer eXperience Center 200-6750 Century Ave. Mississauga,Ontario L5N 0B7 -
Register to access warranty information and receive important notifications related to your product. Scan the Photo Registration Card or QR code to register your product.
-
WARNING: To reduce the risk of fire, electric shock, or injury to person, read the Important Safety Instructions located in the Safety and Installation Instructions provided before installing or operating this appliance.
OPERATING INSTRUCTIONS
WARNING
Tip Over Hazard
- Do not use dishwasher until completely installed.
- Do not push down on open door.
- Doing so can result in serious injury or cuts.
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the Installation, User Maintenance and Operating Instructions printed and online before installing or operating this appliance.
- Prepare and Load the Dishwasher (14 Place Setting Recommended Loading Pattern)
- Add Detergent and Rinse Aid (as needed) to the Dishwasher
- Check that All Arms Spin Freely (Items in the rack can block the spray arms.)
- Select the desired Cycle for your load.
- Select Additional Options.
- Start / Resume Cycle. Close the door within 4 seconds for top control models.
Additional Loading tips
NOTE: Not all cycles, options, and features are available on all models. Appearance may vary.
USER-MAINTENANCE INSTRUCTIONS
Filter Cleaning
Filters should be removed and cleaned every 1–3 months for best performance.
To remove filter, pull out lower rack, grasp Filter Cup, and rotate it 1/4
turn counterclockwise. Pull up to remove. Remove the Filter Plate. Rinse both
under cold water in the sink. A soft brush can be used to remove stuck-on
food. Replace filter plate. Ensure filter plate is correctly seated under
tabs. To install the filter cup, push down through the opening. Turn clockwise
to seat. Filter cup will click in to place when seated properly. Do not
operate the dishwasher with loose or missing filters.
® /™ ©2023 JennAir. All rights reserved. Used under license in Canada.