LAUCO 333 Industrial Masking Green Tape User Manual
- August 31, 2024
- LAUCO
Table of Contents
333 Industrial Masking Green Tape
“`html
Product Information
Specifications:
- Color: Green
- Backing: Crepe Paper
- Adhesive: Natural Rubber
- Adhesion to Steel: >75N/25mm
- Tensile Strength: 8.5 N/25mm
- Elongation: 7%
- Thickness: 12um
- Cohesion: H/25mm
- Temperature Resistance: High
Product Usage Instructions:
Description: DINOGREN High-Performance Masking
Tape is designed for various applications such as car repairs,
painting purposes, wall painting in buildings, and industrial
sector use.
Features:
- Temperature resistant
- Easy to remove
- Hand tearable
- No adhesive residue
- Good adhesion to even and uneven surfaces
- Compatible with most traditional paints and lacquers
- Will not break during removal
Product Application:
1. Ensure the surface is clean, dry, and free of dust or debris
before applying the masking tape.
2. Cut the desired length of tape using scissors or a cutting
tool.
3. Apply the tape smoothly onto the surface, ensuring it adheres
properly without air bubbles.
4. Press down on the tape to secure it in place.
5. Paint or perform the necessary task over the taped area.
6. Once completed, gently remove the tape by pulling it at a
45-degree angle to avoid damaging the surface.
FAQ (Frequently Asked Questions)
Q: Is this masking tape suitable for outdoor use?
A: Yes, this masking tape can be used for outdoor applications
as well.
Q: Can this tape be used on delicate surfaces?
A: While the tape is designed for good adhesion, it is
recommended to test a small area first on delicate surfaces to
ensure it does not cause damage upon removal.
Q: How long can the tape be left on a surface?
A: It is recommended to remove the tape within 14 days of
application to avoid any difficulty in removal or potential residue
left behind.
“`
333 DINOGREN HIGH PERFOMANCE TECHNICAL DATA SHEET
MASKING TAPE
DESCRIPTION
333 DINOGREN Masking Tape is a high perfomance crepe paper designed for the
automotive sector and paint shops. Compatible with both solvent and water base
paints not only is this tape engineered to resist bleed through, but is thin
profile provides a fine-line paint edge. Making it ideal for a wide variety of
car repair applications and painting purposes. Easy to remove and made with
solvent based adhesive, this high performance masking tape is also temperature
resistant up to 230°F (110°C) / 40 min.
PRODUCT APPLICATION
Ideal for a wide variety of car repair applications and painting purposes. Can
also be used for general wall painting on buildings as well as for various
applications in the industrial sector.
FEATURES
- Temperature resistant Easy to remove Hand tearable No adhesive residue Good adhesion to even and uneven surfaces Compatible with most traditional paints and
lacquers Will not break during removal
NOMINAL VALUES
The following data are nominal values based on PSTC, ASTM and other standard
tests. The data should not be considered as specifications.
Color Backing Adhesive Adhesion to Steel Tensile Strength Elongation
Green Crepe Paper Natural Rubber (8.5 N/25mm) (>75N/25mm) 7%
Thickness (um)
160um±10um
Cohesion (H/25MM)
24H
InitialTack
12
Temperature Resistance
266°F (130°C) / 40 min.
PO Box 592548 | Orlando, FL, 32859 | USA
Customer Service: 800 535 5053
Tape Technical Service: 800 535 5053
info@abcies.com
Product shelf life and storage: 12 months. Suggested storage temperature shall
range from 15°C to 25°C with max. relative humidity of 65%. Material shall be
stored away from heat sources and possibly kept in original package, avoiding
light exposure as well. When temperatures are lower than suggested, it is
always required to recondition the tape at normal temperature before use. This
information is given to the best of LAUCO’S knowledge. Values are typical and
do not constitute a specification. Customers are required to do their own
testing under their working conditions for their intended application. Any
liability arising in respect of our products will be limited to the value of
those products charged to the customer excluding any consequential loss.
EFFECTIVE: 06/24
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>