LAUCO 95113 Superlite Lightweight Body Filler Instructions
- August 31, 2024
- LAUCO
Table of Contents
95113 Superlite Lightweight Body Filler
“`html
Product Specifications
-
Product Name: 95113 Superlite Lightweight Body
Filler(BPO) -
Texture: Creamy
-
Characteristics: Fine, smooth, excellent
filling, no-shrinkage, easy sanding -
Adhesion: Steel, galvanized steel, aluminum,
fiberglass
Product Usage Instructions
SURFACE PREPARATION
Clean and degrease the panel with soap and water, then use a
mild cleaning solvent. Ensure the surface is completely dry before
proceeding. Remove paint and feather edge using 80 grit.
APPLICATION & SANDING
BPO
- Mix ratio: 100 parts filler to 3 parts hardener
- Gel time: 9-10 minutes
- Infrared Bake distance: 50-80 cm
- Sanding: Initial – P80, Final – P180
REMARKS
Ensure not to exceed the specified hardener amount. Mix
thoroughly before application. Apply in layers with firm pressure
and avoid applying all at once. Do not put mixed filler back into
the can. Store in a cool, dry place with the lid closed.
STORAGE
Store in a cool, dry place with the lid closed.
FAQ
Q: Can I store the mixed filler for later use?
A: No, it is recommended not to return mixed filler to the can.
Use it all once mixed.
Q: What should I do if the filler is too hard or too soft after
application?
A: Adjust the mixing ratio of filler to hardener as per the
provided guidelines to achieve the desired consistency.
“`
95113 Superlite Lightweight Body Filler(BPO)
PRODUCT DESCRIPTION
It features creamy texture with extreme fine and smooth body, easy spreading
during application. Excellent filling, no-shrinkage, super easy sanding
without clogging abrasive paper. Super excellent adhesion to steel, galvanized
steel, aluminum and fiberglass.
TECHNICAL CHARACTERISTICS
Color: white Specific weight: 1,0 kg/l at 20ºC Shelf life of Body Filler : 24
months Shelf life of BPO Hardener: 12 months
SURFACE PREPARATION
Clean and degrease the entire panel to be repaired with soap and water,
followed by a mild cleaning solvent. Thoroughly dry the surface before
repairing. Use 80 grit to remove the paint and feather edge.
APPLICATION & SANDING
BPO
Hardener
Gel time
10ºC(50) 20oC(68) 30oC(86)
100:3
100:2 100:2
9- 10 7- 8 3- 5
30
Infrared Bake:
50 – 80 cm
20
MAX. T: 80 °C 5 minutes
15
Sanding: Initial: P80 Final: P180
REMARKS
Do not add more hardener than specified. Mix thoroughly. Apply in layers with
even firm pressure,do not apply all at once. Never return mixed filler to can.
Keep can closed and store in a cool dry place.
STORAGE
Store the product in a ventilated place far from direct exposure to sunlight.
Keep between +5ºC and +30ºC.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>