313 Orange Automotive Refinishing Masking Tape

“`html

Product Information

Specifications

• Color: Orange
• Backing: Crepe Paper
• Adhesive: Natural Rubber (8 N/25mm)
• Adhesion to Steel: 8 N/25mm
• Tensile Strength: >75N/25mm
• Elongation: Standard
• Thickness: Standard
• Cohesion: Standard (H/25mm)
• UV Resistant: Yes
• Waterproof: Yes
• Temperature Resistance: Standard

Product Usage Instructions

The Orange Automotive Refinishing Masking Tape is designed for a
variety of car repair applications, painting purposes, general wall
painting on buildings, and industrial use.

Follow these steps for effective usage:

1. Clean the surface where the tape will be applied to ensure
   proper adhesion.

2. Cut the desired length of tape using scissors or a cutting
   tool.

3. Apply the tape evenly to the surface, ensuring it is securely
   attached.

4. Press down on the tape to activate the adhesive for better
   adhesion.

5. Paint or perform the necessary task while ensuring the tape
   stays in place.

6. To remove, gently peel off the tape in the opposite direction
   of application.

FAQ

Q: Can this tape be used on uneven surfaces?

A: Yes, this tape has good adhesion to even and uneven
surfaces.

Q: Is this tape suitable for outdoor use?

A: Yes, the tape is waterproof, UV resistant, and can withstand
temperature variations, making it suitable for outdoor
applications.

Q: Will this tape leave adhesive residue upon removal?

A: No, this tape is designed to be easy to remove without
leaving any adhesive residue.

“`

313
ORANGE AUTOMOTIVE REFINISHING MASKING TAPE

TECHNICAL DATA SHEET

DESCRIPTION
313 Orange Tape is a waterproof masking tape designed specifically for the automotive sector and paint shops. Compatible with both solvent and water base paints, not only is this tape engineered to resist bleed through, but is thin profile provides a fine-line paint edge. making it ideal for a wide variety of car repair applications and painting purposes. easy to remove and made with solvent based adhesive, this high performance masking tape is also temperature resistant up to 212°F (100°C) / 40 min.
PRODUCT APPLICATION
Ideal for a wide variety of car repair applications and painting purposes. Can also be used for general wall painting on buildings as well as for various applications in the industrial sector.
FEATURES

• Waterproof Temperature resistant Easy to remove Hand tearable No adhesive residue Good adhesion to even and uneven surfaces Compatible with most traditional paints and
  lacquers Will not break during removal UV resistant

NOMINAL VALUES
The following data are nominal values based on PSTC, ASTM and other standard tests. The data should not be considered as specifications.

Color Backing Adhesive Adhesion to Steel

Orange Crepe Paper Natural Rubber (8 N/25mm)

Tensile Strength

(>75N/25mm)

Elongation Thickness (um)

6% 140um±10%um

Cohesion (H/25MM)

24H

UV Resistant

5 days

Waterproof

Yes

Temperature Resistance

212°F (100°C) / 40 min.

PO Box 592548 | Orlando, FL, 32859 | USA
Customer Service: 800 535 5053
Tape Technical Service: 800 535 5053
info@abcies.com
Product shelf life and storage: 12 months. Suggested storage temperature shall range from 15°C to 25°C with max. relative humidity of 65%. Material shall be stored away from heat sources and possibly kept in original package, avoiding light exposure as well. When temperatures are lower than suggested, it is always required to recondition the tape at normal temperature before use. This information is given to the best of LAUCO’S knowledge. Values are typical and do not constitute a specification. Customers are required to do their own testing under their working conditions for their intended application. Any liability arising in respect of our products will be limited to the value of those products charged to the customer excluding any consequential loss.
EFFECTIVE: 06/24

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>