SKYLUX VPL1342 Vertical Sunblind Canopy Instruction Manual

VPL1342 Vertical Sunblind Canopy

“`html

Specifications:

• Product Name: Canopy Vertical Sunblind

• Safety Precautions: Safety nets, lifelines, safety goggles,
  gloves, hard hat

• Installation Requirements: Proper measurements, parallel rails,
  perpendicular casing

• Electrical Connection: Drill hole for motorized controls, power
  cable placement

• Installation Options: On the frame, in the frame, with adapter
  profiles

• Maintenance: Cleaning with soft sponge, tepid water,
  non-aggressive cleaning products

Product Usage Instructions:

Safety Precautions:

Before installation, ensure necessary safety measures such as
safety nets, lifelines, safety goggles, gloves, and hard hat are in
place. Avoid stepping on the glass to prevent accidents.

Preparing the Installation:

Prior to attaching the rail to the posts, recheck the
measurements provided. Ensure the rails are parallel to each other
and perpendicular to the casing to prevent fabric wrinkles or
damage.

Electrical Connection of the Actuator:

Before installing the screen, drill a hole for motorized
controls. Check the actuator cable position (left or right) and run
the power cable through the carrier or next to the side clips.

Installation Situation Options:

Choose the installation location – on the frame or in the frame
with or without adapter profiles as per your requirements.

Installation of the Screen:

Refer to the installation instruction of the screen for detailed
steps. Use the Somfy app for adjustments and troubleshooting.
Ensure correct direction of rotation and avoid parallel actuator
connections.

Maintenance:

Regularly clean the casing, rails, and bottom rail with a soft
sponge or cloth, tepid water, and non-aggressive cleaning products.
Avoid scourers or pressure washers as they can damage the
product.

Frequently Asked Questions (FAQ):

Q: How should I clean the product?

A: Use a soft sponge or cloth with tepid water and
non-aggressive cleaning products. Avoid scourers or pressure
washers.

Q: What safety precautions should I take during

installation?

A: Use safety nets, lifelines, safety goggles, gloves, and hard
hat. Avoid stepping on the glass and follow all provided safety
guidelines.

“`

CANOPY
EN
Vertical sunblind
Mounting instructions

Safety
Take the necessary and required safety precautions, such as safety nets and lifelines when installing from the outside, safety goggles, gloves, hard hat, etc. Do not step on the glass.
Falling from height
· When using ladders to go on the roof: – Ladder in good condition? – Set up correctly at an angle of 75°? – Secured below and on top against moving? – Don’t take heavy material with you on the ladder (3-point contact rule)! If possible, use a crane to lift the material.
· If you are going on the roof, make sure there is a walking surface that is wide enough and that supports on the beams of the lower structure.
· When using an aerial work platform: always wear and secure your harness (mandatory)! Leaving the cage is forbidden.
· Never walk backwards on a roof, always walk forwards. · Make sure there’s enough light in the working zone.
Low-hanging obstacles and falling loads
· Forbidden to walk under or within a radius of 1 m of a hanging or lifted load. · Demarcate the danger zone below the zone where there is a risk of material falling down
during the installation of the veranda. · It’s prohibited to enter these danger zones during construction.
Crushing hazard
· All working tools are in good condition, provided with a valid CE label and all necessary safety regulations. These cannot be removed.
· People who use these working tools are educated for this purpose. Protections are always present on all working tools. They are in good condition and need to be set correctly.
Tripping/falling
· Safety is key and it begins with order and tidiness. Clean everything immediately, leave nothing lying around.
· Trash needs to be sorted. · Be cautious with electric cables (danger of tripping/falling). Never walk backwards! · Make sure there’s enough light in the working zone.

2/16

E_MH_Mounting_instructions_Skylux_Vertical_sunblind

20/11/2023

Sharp objects
· Make sure your fingers/hands are not pinched and watch out for cuts while handling veranda parts.
· Be careful where you put your hands during the installation. · Wearing cut- resistant gloves is mandatory.
Ergonomics
· Always lift loads correctly: bend your knees, move your feet instead of forcing your spine, lift as close to your body as possible.
· Parts of more than 25 kg must be lifted with at least 2 persons.

Personal protective equipment
· Work clothes, safety shoes and helmet are mandatory for everyone.
· Lifeline and harness are mandatory if the edge is not secured enough or if there are no safety nets below the veranda roof. They are also necessary when using an aerial working platform.
· Use gloves when handling veranda parts.
· Safety glasses and hearing protection are mandatory when using saws / grinders. Always perform a Last Minute Risc Analysis! If in doubt: STOP! Do not take unnecessary risks. Ask your supervisor if needed.

20/11/2023

E_MH_Mounting_instructions_Skylux_Vertical_sunblind

3/16

Preparing the installation
Before attaching the rail to the posts, we advise you to recheck the measurements.

90°

Hscn +0/-1 mm

=

=

D +0/-1mm

(HG + HN)+0/-1mm

=

=

B +0/-1mm

Please make sure that the rails are always parallel towards each other and perpendicular towards the casing. This is very important because an incorrect installation causes wrinkles in the fabric or permanent damage.

Electrical connection of the actuator Before installing the screen, you must provide a drill hole for the motorised controls. – Check the position of the actuator cable (left or right). – Run the power cable through the carrier or next to the side clips.

Power cable

4/16

E_MH_Mounting_instructions_Skylux_Vertical_sunblind

20/11/2023

Installation situation options

“On the frame” = in front of the roof

“In the frame” = below the roof

“In the frame” = below the roof + adapter profiles

20 mm

2

1

4

3

46 mm 46 mm

32 mm

32 mm

Pre-installation adapter profile

VPL1342
Climalux GX

ø 5 mm

Climalux GXLX Climax GD1 Side of canopy
Climax Panorama GDG Climax GD2
20/11/2023

ø 5 mm

ø 5 mm

E_MH_Mounting_instructions_Skylux_Vertical_sunblind

5/16

VPL1342

71989

Pre-drill reinforcement profile with Ø 4 mm.

Climalux GX

Climalux GXLX

71989 Climax Panorama

71989

71989 Climax GD1

Climax GD2

71989

ZSG

6/16

E_MH_Mounting_instructions_Skylux_Vertical_sunblind

20/11/2023

Installation of the screen
See installation instruction of screen.
Somfy app: manual for adjustments, use, troubleshoot
Installation app – QR code:
Troubleshoot
Remote control: 1. Is the remote control suited for the actuator (RTS, IO, WT …)? 2. Is the remote control connected to the actuator? 3. Does the remote control have multiple control channels? Is it set on the right channel? 4. Did you programme a favourite position? 5. Is the battery of the remote control dead? 6. Have the actuator settings been reset which removed all settings? 7. If necessary, transfer the original actuator to a backup remote control and adjust the sunblind again. Sensors: 1. Is there a wind sensor (wired/wireless) that prevents the screen from being controlled because of strong wind? 2. Is there a solar sensor/rain sensor (wired/wireless)? 3. Is the screen connected to a house automation system? Electrical connection: 1. Did a fuse fail in the distribution box? 2. Is there damage to cables or a connector that has not been connected correctly? 3. Has the actuator been connected correctly?
o Direction of rotation is correct? This can be reversed by programming. o Screen actuators cannot be in parallel! Actuators have different running times
(tube diameter/screen height/end point setting). Actuators connected in parallel will always interfere with each other, resulting in voltage peaks and damage.

20/11/2023

E_MH_Mounting_instructions_Skylux_Vertical_sunblind

7/16

Thermal safety: Keep in mind that tubular motors can only move up and down a few times (depending on the size of the screen before they get too hot and go in thermal safety for about 10 minutes.
External obstacle: Ice formation at freezing temperatures or mechanical obstacles can cause too much resistance, causing the actuator to stop or fail.
Installation: 1. Are the rails parallel to each other and perpendicular on the casing? 2. Are the PVC zip rails neatly installed behind the rubber dampers in the aluminium rails?
Fabric roll-up (open the casing if necessary): 1. Is the fabric under slight tension in the PVC zip rail? 3. Is the fabric rolled up correctly? 4. Is the fabric nicely in the middle of the tube? 5. Does the fabric slope too much to one side? 6. Is the ballast in the fabric slat nicely distributed, or does it feel like everything has been pushed to 1 side? 7. Does the fabric falter when rolling up/unrolling? 8. Does the engine make abnormal noise at any given time? 9. Does the zipper guide nicely in the PVC zipper guides without difficulties to lower or too much tension?
Actuator: 1. Is the actuator type correct? And the actuator power? 2. Are the adapters between the actuator & the tube (tail & head) damaged? Some actuators use this ring to
recognise their position.
Maintenance
The casing, rails and bottom rail should be cleaned with a soft sponge or cloth, tepid water and non-aggressive cleaning products. We strongly advise against cleaning with scourers or pressure washers as they will damage the product.
The canvas must also be cleaned with a soft sponge or brush and tepid water.
Avoid rolling up the canvas when it’s wet as this can cause mould. Let the canvas dry after cleaning or after rain.
The sunblind should not be used during freezing temperatures. The frost can freeze the canvas, which causes damage when the canvas is rolled up or down. We advise to roll up the sunblinds and not to use them in case of temperatures below 3° Celsius.
Failing to comply with the above mentioned maintenance and user advice voids the guarantee.
ONLY USE ORIGINAL PARTS SUPPLIED BY SKYLUX. FAILURE TO USE ORIGINAL PARTS VOIDS THE GUARANTEE. THESE GUIDELINES ONLY SERVE AS ADVICE AND INFORMATION. INSTALLATION IS CONDUCTED UNDER THE SOLE RESPONSIBILITY OF THE CUSTOMER.

SKYLUX IS A REGISTERED BRAND OF SKYLUX SPINNERIJSTRAAT 100 – B-8530 STASEGEM T +32 (0)56 20 00 00 – F +32 (0)56 21 95 99 INFO@SKYLUX.BE WWW.SKYLUX.EU
E_MH_Mounting_instructions_Skylux_Vertical_sunblind

20/11/2023

References

• Het grootste aanbod lichtkoepels & platdakvensters ✓ Skylux

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>