WGP IP67 Smart Bluetooth Audio Glasses Instructions
- June 6, 2024
- WGP
Table of Contents
WGP IP67 Smart Bluetooth Audio Glasses
Product parameters
Frame color blank
Transmission distance 10m
Charging time 1-2 hours
Pairing name Audio eyewear
Bluetooth protocol Bluetooth 5.0
Usage time 5 hours
Frame material resin
Battery capacity 110mAh
Standby time 200 hours
Packing list Glasses, charging cable. glasses box, manual. warranty card
Compatible with Bluetooth devices such as mainstream brand mobile phones and
panel computers.
left and right double speakers, directional playback, true stereo sound.
Button description
Charging OFF/ON
Use the magnetic suction charger attached to the charging contact.
Charging status : The indicator light stays red.Fun charge shows blue
Low power: The Indicator light shows red Hght every 2 seconds end
Power ON: Long press the left and right function keys for 4 seconds. the blue light will turn on once until you hear the sound of the speaker: (Power on) means that the eyewear Is turned on.
Power OFF: In the state of play, pause. call. etc . choose the left/right function keys to press and hold for J seconds. the red light will be on for times, until you hear the sound of speaker: (Power of means that the eyewear is turned of f through Bluetooth.
Bluetooth pairing
- Turn on The eyewear and turn on the Bluetooth of the mobile phone, search for the device name Audio eyewear and connect.
- The eyewear and the phone are paired successfully. Prompt tone: connected
- The eyewear are disconnected from the phone. Prompt tone; Disconnected
Red and blue LED lights flash al1ernately end quickly waiting for Bluetooth pairing. When paired successfully, the blue LED light flashes once every 5 seconds.
language switch
When Bluetooth Is OFF. Click left/right leg function keys 8 times 10 switch
between Chinese and English.
Using a state
Play music status
- Short press the left temple button or ! the right temple button (shorl press for 1 second) to play/pause music.
- Double-click the left temple button to Increase the volume by one level. Double-click the left temple button again to increase the volume by two levels. Double-click the left temple button again to Increase the volume by three levels. Double-click the left temple button again to Increase the volume by four levels. Double-click the left temple button again to increase the volume by five levels 10 reach the hlghes! level. The speaker makes a “di di di” sound. The volume increase is divided into 5 levels. The default Is level 3.
- Doubte-click the right temple button to decrease the volume by one level. Double-click the right temple button to decrease the volume by two levels. Then double-click the right temple button to reduce the volume by three levels. Double-click the right temple button again to reduce the volume by four rivets.
Voice state
When it is standby or you are listening to music. long-press the left/right
temple button for 2 seconds (the speaker will prompt 8 Mdi di di” sound during
the process and press for 1 second) to activate the Sir voice assistant. When
activated. short press again to turn off the Sir voice assistant. There will
be a prompt sound on the mobile phone. The phone wm also pop up a voice
interface.
Call state
- When eyewear·s Bluetooth is con1’18Cted with phone. short press the left/right temple to answer/hang up the Incoming call
- When eyeweaf s Blue tooth is connected with phone, long press the left/right temple button to reject the Incoming call.
- Adjust the volume during a call: double-click the left temple 10 decrease the volume. Double—click the right temple to increase the volume (do not support volume adjustmef11 for the third party call).
- In the call state, shon press the left/right temple button once to connect the second call/switch to three-way calling.
- In the call state, long press the left/right temple button once 10 hang up the current call and answer,- the second call
Sleep state/power state
- When the glasses are In the search state after being turned on. they will automatically shut down after 3 minutes if the Bluetooth of the mobile phone is not found.
- When the glasses are in a suspended state. the blue light is always on. Aft&f” J minutes, the blue light Is off and the glasses are in a sleep sleep state
- When the battery capacity is less than 5% of the total battery capacity, the sys1em wi!I release the prompt tone ttPleasecharge the eyewear”.
- When the battery capacity less than 15% of 1he total battery capacity. the red light will flash to indicate that the battery is low.
Attentions
- Please fully charge the product for first use
- Do not wipe the dirty lenses directly. The lenses should be moistened first. and then dried with a lens cloth Try to use suede and strong absorbent glasses cloth to wipe It clean. do not wipe with too much force. wipe 1n the same direction. do not wipe back and forth. and do not rotate around the lens.
- Do not dismantle or repair or remodel this product for any reason. otherwise, 11 may cause fire. electronic breakdown or even complete damage to this product.
- Do not place the device in an environment that Is too hot or too cold (below o•c or above 45″C)
- Do not soak the production liquid
- The eyewear cannot be exposed to the sun for a long 11me. otherwise, they will be easily deformed. aged and broken.
- Do not put the magnetic suction of the charging cable close to metal ob1ects to prevent the danger of short circuits caused by the magnetic suction or metal objec1s.
- If the charging is complete. please disconnect the charger from the device, unplug the charger, and do not charge more than 12 hours continuously.
- Please do not throw the old battery In the domestic garbage for disposal. Improper battery disposal may cause the battery to ca1ch fire or explode, please follow local regulations when disposing of I his product. battery and other accessories.
To avoid hearing damage, do not use high volume for a long time.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>