IKEA RANARP Household Ceiling Lamp Instruction Manual
- June 6, 2024
- Ikea
Table of Contents
IKEA RANARP Household Ceiling Lamp
GENERAL INFORMATION
The product was designed for general use in indoor spaces. The product is certified.
TECHNICAL FEATURES
Source voltage (alternating current), V ……………………………………………………..110-240V
Network power frequency, Hz …………………………………………………………………..50-60Hz
Maximal total capacity of the lamp, W ………………………………………………………22W
Lamp voltage, V Sold without light source ………………………………………………..220-240V
Bulb socket type ……………………………………………………………………………………….E27
Maximum capacity of the bulb, W Sold without light source ……………………..22W
Number of bulbs, pcs. ………………………………………………………………………………1
Operating temperature, °С ……………………………………………………………………….+5 – +40
Relative humidity, %, not exceeding ………………………………………………………….80
The product’s protection rating ………………………………………………………………..IP20
Material ……………………………………………………………………………………………………Steel
Service Life………………………………………………………………………………………………..10 years
The product can still be used after the end of service life, if you follow the safety information and other instructions in the user manual. When you decide to stop using the product, please contact your local recycling facility regarding disposal of the product.
Safety measures
Important! All works on assembly and installation of the lamp should be performed only with a disconnected power supply!
- It is prohibited to use the lamp in a very humid environment (bathroom, etc.).
- If you use bulbs with higher capacity or of a structure different than those indicated in the user manual and on the lamp’s marking, the lamp may stop working and result in the loss of the right for warranty service.
- Clean the lamp with a soft dry cloth.
- Do not use chemically active or aggressive cleaning agents to clean the lamp.
How to use
Inspect the product in order to ensure the integrity of the plug, the power
cord and the lamp. Put the bulb into the lamp. Insert the plug into the
socket.
MAINTENANCE
To replace the bulb:
- Disconnect the lamp from the power supply network.
- Give the bulb and the lamp case time to cool down.
- Make sure, that the replacement bulb suits the lamp in terms of type and capacity.
- Remove the old bulb and install the new bulb.
TRANSPORTATION AND STORAGE
The product should be transported and stored in the package in compliance with
safety precautions to avoid mechanical damage and exposure to atmospheric
precipitation.
DISPOSAL
The product should be disposed of in compliance with local legal requirements.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize
any potential negative impact on human health and the environment. For more
information, please contact your IKEA store.
PROBABLE MALFUNCTIONS AND METHODS FOR REMEDY
Important! All works targeted at the remedy of possible malfunction of the product should be performed only with a disconnected power supply!
The lamp doesn’t work
- check the supply-line voltage
- make sure that the bulb has suitable voltage and capacity
- check the bulb’s performing capacity
- check the bulb’s position
PRODUCT DATA
Product name | RANARP |
---|---|
Product type | Household Ceiling Lamp |
Product model or Art.nr | Typ T1641 RANARP |
Trademark | IKEA |
Country of origin | Romania |
Manufacturer | IKEA of Sweden AB |
Address | Box 702, ÄLMHULT, S-343 81, Sweden |
Regarding the quality of IKEA products contact seller | LLC IKEA DOM, |
Russia, 141400, Moscow Region, Khimki, IKEA microdistrict, bldg. 1 – through the form on website http:// www.IKEA.ru/, by phone 8 (800) 234-55-66 or to the IKEA
Service department in any IKEA store.
Importer| LLC “IKEA TORG”, bld. 1, microraion IKEA, Khimki, Moscow region, 141400 Russia, tel.: +7(495) 737-5301, fax: +7(495)
737-5324
Manufacture date:| Date of manufacture specified in the format DD.MM.YY on
the label or package
IMPORTANT
Always shut off power to the circuit before starting installation work. In
some countries, electrical installation work may only be carried out by an
authorized electrical contractor. Contact your local electricity authority for
advice.
Installation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>