Cobra SC 220C Smart Dash Cam Owner’s Manual
- August 31, 2024
- Cobra
Table of Contents
SC 220C Smart Dash Cam
“`html
Product Specifications
-
Model: SC 220C Dash Cam
-
Display Interface Languages: English, Spanish, French,
German -
Storage: 16 GB Micro SD Card
-
Power Input: USB-C
-
Features: Interior Camera, Electrostatic Films, Vehicle
Charger, Adjustable Front Lens
Product Usage Instructions
Mounting
-
Find a clean area on the windshield that is centrally located
and close to the top. -
Mount the dash cam ensuring the display is easily visible to
the driver. -
(Optional) Use the electrostatic film for a semi-permanent
installation. -
Plug the power cable into the dash cam and route it along the
headliner using the provided tool and clips.
Powering On
-
Plug the 12V vehicle power adapter into the vehicle’s port and
the USB-C port of the dash cam. -
The unit will automatically turn on and start recording.
-
To manually power on, press and hold the Action Button until
the display activates.
Continuous Loop Recording
Once powered on, the dash cam will start loop recording. When
the SD card is full, it will overwrite the oldest footage with new
recordings. Press the Action Button to lock important footage and
prevent deletion.
Frequently Asked Questions (FAQ)
How can I change the language on the display interface?
You can change the language to English, Spanish, French, or
German in the display settings of the dash cam.
Can I hardwire the dash cam for a more permanent
installation?
Yes, hardwire kits are available on www.cobra.com for discrete
routing of the power cable and recording while the vehicle is
off.
How do I protect specific clips from being overwritten?
To protect a clip from being overwritten, press the Action
Button to move it into the locked content partition, ensuring it is
not deleted during loop recording.
“`
Contents
INTRODUCTION……………………………………………………………………………………………………… 3 SC 220C DASH CAM
FEATURES ……………………………………………………………………………… 3 PRODUCT SERVICE AND SUPPORT
………………………………………………………………………… 4 WHAT’S IN THE BOX
………………………………………………………………………………………………. 4 OPTIONAL ACCESSORIES available at
www.cobra.com…………………………………………… 4 HARDWARE INTERFACE
…………………………………………………………………………………………. 5 INSTALLATION
……………………………………………………………………………………………………….. 6 DRIVE
SMARTER®…………………………………………………………………………………………………… 9 HEADS-UP NAVIGATION
……………………………………………………………………………………….. 10 VIDEO
SCREEN…………………………………………………………………………………………………….. 10 PARKING LIVE VIEW
……………………………………………………………………………………………… 10 TRIP
CLIPS…………………………………………………………………………………………………………… 10 STATUS BAR ICONS
……………………………………………………………………………………………… 11 VIDEO
SETTINGS………………………………………………………………………………………………….. 12 VIDEO AND PHOTO PLAYBACK
MODE …………………………………………………………………… 12 MEMORY CARD STORAGE
……………………………………………………………………………………. 13 LOOP RECORDINGS
…………………………………………………………………………………………….. 13 EMERGENCY
RECORDINGS………………………………………………………………………………….. 13
PHOTOS………………………………………………………………………………………………………………. 13 SAFETY FEATURES
………………………………………………………………………………………………. 14 GENERAL
SETTINGS…………………………………………………………………………………………….. 15 CLOUD FEATURES
……………………………………………………………………………………………….. 16 FIRMWARE
UPDATES……………………………………………………………………………………………. 18
SPECIFICATIONS………………………………………………………………………………………………….. 19 TROUBLESHOOTING
……………………………………………………………………………………………. 20
FAQ……………………………………………………………………………………………………………………… 20 LIMITED 1-YEAR WARRANTY
AND TRADEMARK INFORMATION………………………………. 21 FCC REGULATORY INFORMATION AND
WARNINGS……………………………………………….. 22
2
Introduction
Congratulations! You made the smart choice by purchasing an SC Series smart
dash cam from Cobra. SC Series dash cams provide peace of mind by continuously
recording the road with crystal-clear video. With advanced safety features,
industry-leading video quality, and exclusive shared alerts from our network
of drivers, SC dash cams are the best solution to record your ride.
SC 220C DASH CAM FEATURES
· Quad HD Video Resolution Quad HD resolution allows you to capture crucial
details such as license plate numbers
· 360 Alerts Get radar, laser, red light and speed camera location from our
database and radar users
· Heads-Up Navigation Plan routes in the Drive Smarter® app and easily view
upcoming turns on screen
· Two-Dash Cam Capable Includes a Quad HD front dash cam and 1080P interior
dash cam
· Parking Live View Enables security recording and live viewing of your dash
cam footage (Hardwire kit and WiFi hotspot required)
· Trip Clips Create time-lapse videos of your drives to easily share with
friends and family
· Emergency Mayday Alert Automatically alerts your designated contact in the
event of a severe impact
· Cloud Video Management Manage and share footage from your phone
· Over-The-Air Updates Update your dash cam with the latest firmware and
features
· SD Card Included
· 3″ Touchscreen Display
Display Interface Supports These Languages: – English – Spanish – French –
German
3
Introduction
PRODUCT SERVICE AND SUPPORT
For any questions about operating or installing this new Cobra product, PLEASE
CONTACT COBRA FIRST…do not return this product to the retail store. The
contact information for Cobra will vary depending on the country in which you
purchased and utilize the product. For the latest contact information, please
go to www.cobra.com/support.
WHAT’S IN THE BOX
· SC 220C Dash Cam · 16GB SD Card · Slide-Out Mount · Cable Management Kit: 6
Wire
Clips & Cable Routing Tool · Vehicle Charger · USB-C Data Cable · Temporary
Install Film:
3 Electrostatic Films
SC 220C Dash Cam with Interior Camera
USB-C Data Cable
16 GB
Micro SD Card
6 Wire Clips & Cable Routing Tool
Vehicle Charger
3 Electrostatic Films
Slide-Out Mount (Pre-mounted on camera)
OPTIONAL ACCESSORIES available at www.cobra.com
Easy Install Hardwire Kit: 0010070-1 Wires your dash cam directly into the
ODB II diagnostic port for a quick and clean installation.
Fuse Box Hardwire Kit: 0010073-1 Wires your dash cam directly into the vehicle’s fuse box for a versatile installation.
4
Introduction
HARDWARE INTERFACE
USB-C Power Input Reset Button Action Button
Slide-Out Mount Adjustable Front Lens
Installation
MOUNT
Find an area on your vehicle’s windshield that is centrally located and close
to the top of the windshield. Make sure the mounting area on the windshield is
clean. The dash cam should be mounted so the display is easily visible to the
driver.
(Optional: Place the included electrostatic film on the desired location for a
semipermanent install).
Plug the power cable into the dash cam and then route the power cable along
the headliner using the included tool and cable routing clips as needed.
6 Wire Clips & Cable Routing Tool
Vehicle Charger
Electrostatic Film
SD Card Slot
Interior Camera
Touch Navigation Buttons 5
LED Status Light
· Blue LED indicator light when the dash cam is powered up.
· Red LED indicator light when the dash cam is recording.
· Purple LED indicator light when a camera is updating a firmware (or update
is in process.)
Rotate front dash cam lens so that it is parallel with the road.
6
Installation
POWER
Plug one end of the supplied 12V vehicle power adapter into your vehicle’s 12V
power port and the other end into the USB-C port. The unit will automatically
turn on and start recording. To manually power on the device PRESS AND HOLD
the Action Button until the display activates.
Note: Hardwire Kits are available at www.
cobra.com for a more permanent installation that allows for discrete routing
of the power cable and recording while your vehicle is off. See page 4 for
more details.
Vehicle Charger
DRIVE!
Your dash cam is designed for easy operation. Once powered on, it will
immediately start loop recording. As the SD card fills up, the oldest footage
is erased to make space for new recordings. To keep any important footage from
being deleted, simply press the Action Button, and it will be locked.
7
Installation continued
POWERING ON THE DEVICE
The device will power on automatically when plugged in and can also be powered
by pressing the Action Button until the display activates (when connected to
power).
CONTINUOUS LOOP RECORDING
NORMAL
EVENTS
FAVORITES
PHOTO CAMERA
Once the SD card is full, the dash cam will continuously overwrite the oldest footage recorded with recent recordings. To protect a clip so that it will not be overwritten, press the Action Button so that the clip is moved into the locked content partition.
EMERGENCY RECORDINGS
An Emergency Recording is triggered when the Action Button is pressed or when
the G-Sensor registers a significant impact (hard braking or collision).
Emergency Recordings create locked files that are not overwritten by
Continuous Loop Recording. To ensure that important footage is not lost
surrounding an incident, the adjacent video clip is locked if the incident
happens within 30 seconds of the beginning or end of a clip.
THE SD MEMORY CARD
The device comes with a SD memory card. To remove the SD card, press firmly on
the card to push it further into the slot until you hear a click. The card
will pop out upon release. Extract the card and replace it if necessary by
inserting a new card into the slot and pressing until it locks in place.
This dash cam supports SD cards up to 512GB. Before using, be sure to format
the card in-dash cam. We recommend using Class 10 high-endurance cards from
reputable brands for continuous video recording in a dash cam.
For the latest compatible SD cards, check www.cobra.com.
VOLUME ADJUST
The SC 220C allows you to select “Volume” in the setting menu to adjust the
volume of notifications and voice announcements. You can also make volume
adjustments using the Drive Smarter® app.
INITIAL SETUP
Upon initial power-up, the device will display the video stream and initiate
loop recording automatically. To optimize functionality, it is recommended to
pair the dash cam with the Drive Smarter® app for downloading the latest
firmware and ensuring the dash cam is up-to-date. Please refer to the
CONNECTION INSTRUCTIONS for app-to-dash cam pairing.
8
Operation
DRIVE SMARTER®
Download
Drive Smarter®
CONNECTION INSTRUCTIONS
1. Start the Drive Smarter® app and log in/create an account. 2. Follow the
instructions in the Drive Smarter® app to create a vehicle and connect the
dash cam. 3. When complete, a chime will sound on the dash cam and it will
appear as Connected in the Drive
Smarter® app.
360 ALERTS
Connecting to the Drive Smarter® app enables your dash cam to receive real-
time driver alerts about what is on the road ahead, including:
Red Light Dash cam Speed Dash cam Speed Traps
Live Police
Caution Areas
Operation
HEADS-UP NAVIGATION
Connecting your dash cam to the Drive Smarter® will also enable you to receive
Heads-Up Navigation instructions on the dash cam display. Simply connect your
SC 220C to Drive Smarter® app, find a route in the app, and drive using the
dash cam for guidance!
Drive Smarter®
VIDEO SCREEN
The video screen serves as the main screen for the dash cam. With the SC 220C,
depending on your settings, you can choose to display one, two, or three views
simultaneously.
PARKING LIVE VIEW
Enables security recording and live viewing of your dash cams. (Hardwire kit
and WiFi hotspot required)
TRIP CLIPS
Create time-lapse videos of your drives to easily share with friends and
family.
VIDEO SCREEN BASICS
When first powered on, the video screen will show you what the dash cam sees.
Note: The button functions are different depending on whether the unit is
currently recording or not. When first turned on or connected to power, the
dash cam is in Loop Recording mode. Loop recording must be stopped for the
unit to enter the Settings Menu.
Lock
Privacy
Video
Settings
Recording
Mode
Gallery
9
10
Operation
STATUS BAR ICONS
Indicates when dash cam is loop recording. Hazard icon appears in status bar
if an Emergency Recording is in progress. The video is being locked.
Indicates when the dash cam is connected to the Drive Smarter app. Indicates
whether the microphone is active or muted. Indicates if Parking Mode is
enabled. Indicates that WiFi is enabled on the dash cam, WiFi connection is
possible if paired with a phone. Camera connected to user’s Hotspot.
Active WiFi connection to Drive Smarter (used when viewing videos through the
app).
GPS Icon appears when there is a satellite lock and the camera is tracking
location, date, and time. GPS Tracking may not be possible in tunnels or in
parking garages.
Operation
VIDEO SETTINGS
Video Resolution This setting allows you to set the following resolutions on
your camera. Lower resolution settings result in smaller file sizes, which
makes the files easier to transfer and share. The available resolutions are:
· 1440P QHD ……………….. 2560 x 1440 30 Frames per Second
· 1080P Full HD…………….. 1920×1080 30 Frames per Second
Video and Photo Playback Mode This device stores videos and photos on its
removable SD card. In Playback mode, you can review saved files and play back
videos with sound. Use the arrows to navigate and the OK key to select a video
or photo. Press the Back key to return to the previous screen. You can view
and delete photos. There’s no need to lock photo files, as they won’t be
overwritten by continuous loop recording.
11
12
Operation
VIDEO SETTINGS continued Memory Card Storage
66% Loop Recording
34% Locked Content
NORMAL
EVENTS
FAVORITES
PHOTO CAMERA
Loop Recordings
Once the SD card is full, the dash cam will continuously overwrite the oldest
footage recorded with recent recordings. To protect a clip so that it will not
be overwritten, press the Action Button so that the clip is moved into the
locked content partition.
Locked Recordings
An Emergency Recording is triggered when the Action Button is pressed or when
the G-Sensor registers a significant impact (hard braking or collision).
Emergency Recordings create locked files that are not overwritten by
Continuous Loop Recording. To ensure that important footage is not lost
surrounding an incident, the adjacent clip is locked if the incident happens
within 30 seconds of the beginning or end of a clip.
Photos Photos are automatically saved in the Locked partition of the SD card.
Trip Clip Recordings
When enabled, the camera will record 1 frame every 5 seconds to create time
lapse recordings so you can easily share scenic drives with family and friends
(1 minute clip will contain ~2.5 hours of driving). This will replace the
standard loop recording for the front camera when enabled. · Trip Clip
Recordings are used for the front camera only. Rear or Cabin cameras will
record normally. · Trip Clips will be interrupted and normal recording will
resume if an impact is detected or the lock clip
button is pressed. This is done in order to save important footage in case of
an accident.
You may be occasionally asked to “Format the SD Card” by the dash cam. This
will delete all SD card content and to help the memory card continue operating
properly. Please save all important footage by downloading via the Drive
Smarter® app or by manually uploading to your PC before doing this.
13
Operation
SAFETY FEATURES
The SC Series dash cams come with several safety features designed to protect
you and your vehicle. You can adjust the level of protection that fits you via
dash cam and Drive Smarter® app settings.
G-Sensor Impact Detection Your dash cam is equipped with a built-in G-Sensor
that can detect collisions. If a collision is detected, it automatically
secures the recording during the incident. Additionally, if the event happens
within 30 seconds of the start or end of a clip, the adjacent recording is
also locked. This ensures you always have at least 30 seconds saved before and
after the event. You can adjust the G-Sensor sensitivity from 1 to 3 or turn
it off. Level 1 makes it easiest to activate the G-sensor, while Level 3 only
locks videos in the case of the most severe impacts. Videos locked due to
G-sensor impact detection are stored in the Events folder on the SD card.
Parking Mode & Motion Detection Parking Mode utilizes the built-in Motion
Sensor and G-Sensor to monitor your vehicle when it’s parked. While parked,
the dash cam is in a “sleeping” state, keeping an eye out for motion or
G-Sensor impacts. If either is detected, the unit will wake and begin
recording. After 5 minutes of inactivity, the dash cam automatically enters
parking mode. If no motion is detected during this period, the display turns
off, and recording stops, with the dash cam staying alert for potential
G-sensor impacts or motion. When motion or a G-sensor impact above Level 1
occurs, the unit awakens and starts saving 1-minute clips as long as activity
is detected. Optional hardwire kit required
Notes · Parking Mode only works properly if the dash cam is powered. Either
the 12V power port must
remain on with the ignition off, or the dash cam must be hardwired to a
constant power source (please check www.cobra.com for available accessories).
· In scenarios where frequent motion triggers the sensor and prevents the dash
cam from entering sleep mode, the “Auto Surveillance Shutoff” setting can be
employed. This feature helps avoid unnecessary recordings. If your vehicle
remains inactive for more than 48 hours (or a shorter duration for older
batteries), it is advisable to utilize the “Auto Surveillance Shutoff”
setting. This allows you to set a time limit on Parking Mode, preventing
potential battery drainage. · You can choose to have your dash cam monitor for
impacts and/or motion by controlling the Parking Mode’ andMotion Detection’
settings separately.
14
Operation
GENERAL SETTINGS
Video Resolution Allows you to select the desired video resolution for loop
recordings and emergency videos. Smaller (1 min) files are easier to transfer
to your phone and share.
Loop Clip Time Loop recordings and emergency videos can be saved in 1 min, 2
min, or 3 min clips depending on your preference. Smaller (1 min) files are
easier to transfer to your phone and share.
WiFi Allows enabling/disabling WiFi connection on the device and viewing the
dash cam’s WiFi name and password.
GPS GPS can be disabled if needed. Enabling this setting allows your
recordings to have an exact GPS location stamped on the footage. This also
always allows you to know the location of your vehicle if the dash cam is
wired via a hardwire kit and connected to a WiFi hotspot is installed in the
car.
Date / Time · Enable “Automatic” mode to have date / time settings based on
the dash cam’s GPS signal. Having the correct date and time ensures that
timestamps associated with your videos are accurate. In this mode, you will
still have to ensure that you have picked the correct “Time Zone” and enabled
or disabled “Daylight Savings” based on your location. · To manually set the
date and time, cursor down to “Manual”, and select it. You will now be able to
enter Date and Time information.
Microphone The microphone can be enabled or disabled via settings or on the
main screen. When disabled your recorded videos will be silent.
Motion Detection Enabling Motion Detection allows your dash cam to monitor
movement around the dash cam (changes in light) which can be used to record
any suspicious activity around the vehicle when parked. This setting screen
allows you to choose which of the available dash cams should be used to
monitor for activity. If leaving your vehicle off for more than 48 hours (or
less if your battery is old) please use the “Auto Surveillance Shutoff”
setting to set a time-limit on Motion Detection and prevent your battery from
being drained. Note: For Motion Detection to work the dash cam needs to be
connected via hardwire kit (part: 00100701) or be plugged into an always on’ Cigarette Lighter Socket using a 12V power cable (12V Power Adapter (CLA) # PN: 0010072-1 or Fuse Tap Power Adapter #0010073-1). You can check if your vehicle has analways on’ CLA adapter online or in the vehicles owners
manual.
15
Operation
Parking Mode Enabling Parking Mode allows your dash cam to monitor for changes
in its internal G-Sensor/ accelerometer. Bumps, collisions, and break-ins can
trigger the G-Sensor to save valuable footage from the moment of impact. If
leaving your vehicle off for more than 48 hours (or less if your battery is
old) please use the “Auto Surveillance Shutoff” setting to set a time-limit on
Motion Detection and prevent your battery from being drained. Note: For
Parking Mode to work the dash cam needs to be connected via hardwire kit (see
page 4 for more details) or be plugged into an always on’ cigarette lighter socket. You can check if your vehicle has analways on’ CLA adapter online or
in the vehicles owners manual.
Surveillance Auto Shutoff If leaving your vehicle off for more than 48 hours
(or less if your battery is old) please use the “Auto Surveillance Shutoff”
setting to set a time-limit on Motion Detection and Parking Mode to prevent
your battery from being drained. Auto Shutoff time starts after Parking Mode
starts.
G-Sensor You can use this setting to set the sensitivity of the G-Sensor from
1-3 or turn it off. Level 1 is the easiest to activate the G-sensor. Level 3
is the setting which will only lock videos when the most severe impacts are
detected. Level 1 is recommended for most users.
Watermark (Date/Time, Speed, GPS, Driver ID Video Stamp The watermark settings
allow you to toggle having the date/time, speed, GPS coordinates, the Cobra
logo and a custom Driver ID be stamped into the bottom of all recorded video.
Driver ID Watermark This setting allows you to associate a Driver ID with the
dash cam (for example: John, Employee 12, etc). This allows you to set the
name of the driver which will be stamped on the footage as part of the
watermark.
Exposure Allows you to adjust how light or dark videos and images will appear
on the dash cam.
Screen Saver Allows you to set a duration after which the device’s display
turn off with the dash cam still recording. This setting is useful to avoid
distracted driving and having a bright LED screen when driving at night. When
Screen Saver : Display Speed and Time is selected, the display will turn off
but the display shows a current speed and time.
Interior Night Vision The optional interior dash cam’s infrared LEDs allow for
clear recording at night. You can set this to be always on, off, or select
Auto to allow the dash cam to detect low-light conditions and automatically
enable Interior Night Vision recording.
Language This setting allows you to pick the on-screen language for the dash
cam unit.
16
Operation
360 Alerts This feature enables users to view real-time and shared alerts
gathered from the Drive Smarter® network. You have the option to receive voice
announcements from the dash cam when approaching a red light camera or speed
camera location or to only see visual warnings on the LCD display.
Alternatively, you can opt to disable notifications from the unit altogether
and rely solely on the Drive Smarter® app for guidance.
Drive Smarter® Services These settings allow you to select which videos you
would like auto-uploaded to the Drive Smarter® app for sharing/review. You can
also choose to have Incident Reports sent to your insurance provider, as well
as Mayday alerts sent to your Emergency Contact if a severe G-Sensor event is
detected.
Speed Units Choose between miles/hour or kilometers/hour as the speed unit
stamped in the watermark.
Volume Allows you to raise and lower the volume of notifications and button
beeps from your dash cam.
Restore Defaults Resets the device to factory settings. Note: restoring
defaults will NOT erase data on your memory card.
Format SD Card Allows you to format the inserted SD card. Note: This action
will permanently delete all data on the card. It is recommended to format any
new card and periodically format existing cards.
About You can use this setting to view your dash cams electronic serial number
including FCC ID number and Industry Canada number. You can also view the
manufacture part number and firmware version.
Cloud Features
CLOUD VIDEO MANAGEMENT
Important Videos can be uploaded to the cloud by connecting to the camera’s
gallery using the Drive Smarter app. Simply view the desired video and press
“Upload to Cloud”. These videos are uploaded to your Drive Smarter Portal for
safekeeping, allowing you to free up space on your SD Card for new locked
recordings.
Parking Live View
To use Parking Mode and Remote Live View, ensure these settings are enabled on
your camera. · Remote Live View: This feature allows remote viewing of your
camera’s video stream to monitor your
vehicle or loved ones. Connect your camera to an always-on hotspot such as
your built-in vehicle WiFi (with active subscription), an in-car WiFi adapter,
or home WiFi. Use the Drive Smarter app to set up Hotspot Settings (Devices >
Device Settings > Hotspot Settings). · Parking Mode: This feature allows the
camera to go into a low-power state Ensure your camera’s firmware is up-to-
date to use Cloud Features. Accept over-the-air updates when prompted by Drive
Smarter or check the Firmware Update page in your device settings.
When the vehicle is powered on: · The camera can initiate a Remote Live View
session without requiring a hardwire kit. · If connected to an active internet
hotspot, it will appear as “Available” on the administrator’s Drive
Smarter account. · View the live feed on the Drive Smarter app’s “Remote
Security” tab or by logging into Drivesmarter.
com via the web portal.
When the vehicle is powered off and Parking Mode is enabled: · The camera
enters Low Power Parking Mode after a period of inactivity. · The camera
monitors for impacts using the built-in G-Sensor. · Upon detecting an impact,
the camera turns on fully, begins recording immediately, and connects to
any programmed hotspot. – If Parking Mode Notifications are enabled, the
account administrator will receive a notification from
the Drive Smarter app that an impact has been detected. – If Automatic Video
Upload is enabled, clips of the incidents will automatically upload to the
account holder’s Drive Smarter account for review (accessible on
Drivesmarter.com). · View the live feed using the Remote Security tab on the
Drive Smarter app or by logging into
Drivesmarter.com. · If the camera displays as “Unavailable,” it has returned
to low-power Parking Mode (disconnected
from internet) and is monitoring for additional impacts.
15
16
Cloud Features
CLOUD VIDEO MANAGEMENT continued Automatic Video Upload
If Automatic Video Upload is enabled, locked recordings will automatically
upload to the account holder’s Drive Smarter account for review (accessible on
Drivesmarter.com). This applies to locked recordings while driving or while
parked. Log into Drivesmarter.com to view your cloud videos.
Parking Mode Notifications
If Parking Mode Notifications are enabled, the account administrator will
receive notifications when a Parking Mode incident is detected through the
Drive Smarter app. Please ensure that:
– The camera is hardwired to the vehicle for constant power or is connected to
an “always on” CLA port.
– The camera has been programmed to a hotspot with an active internet
connection. – Your phone allows notifications from Drive Smarter.
17
Firmware Updates
Ensure the dash cam is connected to a constant power source during the update
process. Failure to do so could result in your unit becoming non-functional.
Your vehicles cigarette lighter socket or a household outlet work best. Using
the Drive Smarter® App · View the current firmware version under the About
menu item on the dash cam: – Stop loop recording – Press the MENU button,
cursor down to the ABOUT item – Note the firmware version shown on the screen
· Power up your dash cam by connecting to constant power source such as your
vehicles CLA adapter or a household outlet.
· When you connect your dash cam, the app will check if a newer firmware
update is available on the server.
· Press Download’ on the notification to download the latest Firmware. · Follow the instructions on the Drive Smarter® app. If successful, the dash cam’s LED’s will begin blinking while the firmware is being installed. · To check that the Firmware update was successful, you can check theAbout’ screen in your
dash cam’s settings menu.
Using a Mac or PC
For optimal performance, check www.drivesmarter.com periodically for software
updates. · View the current firmware version under the About menu item on the
dash cam: – Stop loop recording – Press the MENU button, cursor down to the
ABOUT item – Note the firmware version shown on the screen
· Connect the dash cam to your computer using the included USB to USB-C cable.
· Power on the dash cam and select Connect to Computer using the record/select
button. · The dash cam will be listed in Windows Explorer/Finder. · Download
the update file from www.drivesmarter.com and save it to your computer. It
will end with
“.bin” as the file extension. Note: You do not need to double click or open
this file on the computer. · Copy/paste or drag the update file you downloaded
.bin file into the root directory of the dash
cam’s SD card. · Wait for the file to transfer and then safely disconnect the
dash cam from the computer. The dash
cam will turn off. · Plug the USB-C cord into a reliable power source such as
your home’s outlet or your vehicle’s
CLA adapter. The dash cam will turn on and automatically boot into the
Firmware Update Menu. · Follow the directions on the dash cam display to
update firmware if the unit has one. Units without
displays will update automatically. · You can check if your dash cam is up to
date by checking the firmware in your dash cams `About’
setting submenu in the dash cam or via the app.
18
Dash Cam Specifications
19
Troubleshooting
If your unit does not appear to be operating properly, please follow these
troubleshooting steps: · Make sure the power cord is properly connected. ·
Make sure the socket of your vehicle’s cigarette lighter is clean and free of
corrosion. · Make sure the power cord’s cigarette lighter adapter is firmly
seated in your cigarette lighter. · Make sure you have downloaded the latest
firmware to your unit.
FAQ
· Where do I mount/position my dash cam on the windshield? a. Power on your
dash cam so you can see the dash cam’s view while mounting. We recommend
centering your dash cam and mounting under the rear-view mirror.
· What is the largest SD card size I can use in my dash cam? a. We recommend using a minimum Class 10 or U1 card from a reputable vendor up to the following sizes.
Model
SC 120 SC 220C SC 220C
Max SD Card Size 256GB 512GB 512GB
Important: When using a SD card for the first time please format the card in
the dash cam by using the dash cam menu or the Drive Smarter® app.
· Why is my unit not powering up? a. Please ensure your unit is properly
connected. If you have turned the unit off, press and hold the power button to
turn on again. If you are using Parking Mode and Motion Detection Mode with a
hardwire kit, the unit might not “wake up” when you enter your vehicle. Simply
begin driving and when your unit detects this it will wake up and begin
recording.
· How do I use Parking Mode and Motion Detection? a. Parking Mode and Motion
Detection can be turned on in the dash cam’s settings. These two features will
monitor your vehicle automatically when the unit is connected directly to the
car’s vehicle via hardwire kit (check for availability at www.cobra.com).
Note: When the car is parked your unit will go into a low-power
“standby”/sleeping state where it monitors for activity. The unit will
automatically wake up when it detects significant motion or driving.
· Why is my unit not getting a GPS Lock (GPS icon is red)? a. The GPS inside
the device locks in with the satellite best when you are on the road. You may
not be able to get a GPS lock while in your garage, parking structures, or if
testing the dash cam in your home.
20
Limited 1-Year Warranty and Trademark Information
Warranty Terms: Cobra warrants your product against all defects in materials
and workmanship for a period of one (1) year from the date of original
purchase. Cobra, at our sole discretion, will repair or replace your product
(with the same or comparable product) free of charge. Cobra will not pay
shipping charges that you incur for sending your product to us. Products
received COD will be refused. To make a warranty claim, we will require proof
or purchase in the form of an invoice or receipt. No proof of purchase is
required for factory direct purchases. Warranty Exclusions: Warranty does not
apply to your product under any of the following conditions: 1. The serial
number has been removed or modified. 2. Your product has been subjected to
misuse or damage (including water damage, physical abuse, and/or improper
installation). 3. Your product has been modified in any way. 4. Your receipt
or proof-of-purchase is from a non-authorized dealer or internet auction site
including E-bay, U-bid, or other non-authorized resellers. LIMITATION OF
WARRANTY: EXCEPT AS EXPRESSLY PROVIDED HEREIN, YOU ARE ACQUIRING THE PRODUCT
“AS IS” AND “WHERE IS”, WITHOUT REPRESENTATION OR WARRANTY. COBRA SPECIFICALLY
DISCLAIMS ANY REPRESENTATION OR WARRANTY INCLUDING, BUT NOT LIMITED TO THOSE
CONCERNING THE MERCHANTABILITY AND SUITABILITY OF THE PRODUCT FOR A PARTICULAR
PURPOSE. COBRA SHALL NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL
DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE
OR MOUNTING OF THE PRODUCT. The above limitations or exclusions shall be
limited to the extent they violate the laws of any particular state. Cobra is
not responsible for products lost in shipment between the owner and our
service center. General Warranty Information Each product we manufacture is
covered by our factory warranty. While each product may have unique components
and policy, the general guideline below will apply to most Cobra products. All
Cobra products purchased factory-direct or from our Authorized Resellers will
come with a full one to three (1-3) year warranty from the date of the
original retail purchase (see policy statement above for full warranty details
and exclusions). Standard accessories packaged with each model will have a
one-year factory warranty. Accessory items have a one-year factory warranty.
Shipping to our facility is not covered in our warranty. Return shipping is
included within the US. This warranty is non-transferrable. For the sake of
clarity, `repair or replace the Product or its defective part’ does not
include removal or installation work, costs or expenses which include but are
not limited to labor costs or expenses. Cobra will not be responsible for lost
packages.
©2024 Cobra Electronics Corporation. Cobra and the snake design are
proprietary trademarks of Cobra Electronics Corporation, USA. Other trademarks
and trade names are those of their respective owners. Cobra Electronics
CorporationTM is a trademark of Cobra Electronics Corporation, USA. Drive
Smarter® is a registered trademark of Cedar Electronics Corporation. Apple and
the Apple logo are trademarks of Apple Inc. Registered in the U.S. and other
countries. App Store is a service mark of Apple Inc. Android and Android Auto
are trademarks of Google LLC. Compatible Android phone and compatible active
data plan required. The Bluetooth® word mark and logos are registered
trademarks of Bluetooth SIG, Inc. and any use of such marks by Cobra
Electronics Corporation is under license.Features, Specifications and prices
subject to change without notice. The Driver Awareness Alert display feature
is subject to US Patent Numbers 8,842,004 and 8,970,422 and additional pending
US Patent Applications.
21
FCC Regulatory Information and Warnings
FCC ID:BBOSC220 IC:906A-SC220
NOTE: This device complies with part 15 of FCC rules: Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received
including interference that may cause undesired operation.
CAUTION: Modifications or parts not approved by Cobra Electronics Corporation
may violate FCC Rules and void authority to operate this equipment. This
device complies with RSS-310 of Industry Canada. Operation is subject to the
condition that this device does not cause harmful interference.
CAN ICES-3B/NMB-3B.
DISPOSAL OF ELECTRONICS EQUIPMENT: This product may contain hazardous
substances that could impact health and the environment if not disposed of
properly.
The crossed out wheeled bin symbol indicates that the product should not be
disposed of along with household waste. It should be handed over to an
applicable collection point for the recycling of electrical equipment. By
ensuring that this product is disposed of correctly you will help/prevent
potential negative impact on the environment.
If you need more information on the collection, reuse and recycling systems,
please contact your local civic office or the shop where it was originally
purchased.
FCC Caution Information to the user.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated withminimum distance 20cm between the radiator & your
body.
ISED Warning: This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired operation of the
device. – French: Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire
de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
22
References
- Communication Radios & Automotive Electronics | Cobra.com
- Home - DriveSmarter
- Communication Radios & Automotive Electronics | Cobra.com
- Home - DriveSmarter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>