Cobra DrillerToggle Drywall Anchor Instruction Manual
- June 2, 2024
- Cobra
Table of Contents
DrillerToggle® New Installation Instructions - October 7, 2020
INSTRUCTIONS :
- – Using a screwdriver, push the tip of the DrillerToggle® into drywall and turn clockwise until the threads go through the wall.
- – Push the DrillerToggle® until the helix is flush with the wall and the arrow at 7 o’clock (as shown in picture 3).
- – Turn clockwise until the DrillerToggle® head is flush with wall and the arrow at 12 o’clock.
- – Insert the screw through the object you need to affix and into the DrillerToggle® and push until you feel a resistance.
- – Turn the screw clockwise until firmly in place.
WARNINGS :
- Do not use in insulated drywall.
- To deploy properly, the anchor needs a MINIMUM clearance of 2-5/8” behind the gypsum board.
- Be sure to install the anchor at a MINIMUM distance of 2” from the wood studs behind the gypsum board.
Cobra DrillerToggle Drywall Anchor Instruction Manual – Optimized
PDF
Cobra DrillerToggle Drywall Anchor Instruction Manual – Original
PDF
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>