DOOR Safe DS3124 Security Camera Instruction Manual
- August 31, 2024
- DOOR safe
Table of Contents
DOOR Safe DS3124 Security Camera
APP DOWNLOAD
Download the app:
Smart Life
or
Tuya Smart
(=same app)
YOUTUBE TUTORIALS
VIEWING IMAGES VIA BROWSER
→ Scan this QR code or go to: ipc-eu.ismartlife.me
→ Open app, choose + and choose : Scan QR code
CONNECT WITH WIFI
→ Connect power to camera
→ Camera now says: “wait for Wi-Fi config”
→ Let smartphone connect to own 2.4GHz. WiFi network
→ Choose in the app: ‘Add Device’ or ‘+’ and ‘Add Device’
→ The camera will appear at the top of the app
→ If not, choose ‘Camera & Lock’ & “Smart Camera (Wi-Fi)”
→ At the top right should be ‘QR Code for Camera’
→ Check and press ‘Next’ 3 times
→ Enter your own Wi-Fi password
→ Have the camera scan the QR code by pointing the camera at the QR code
→ Wait for camera to say: ‘Connect router’
→ Press: I heard Prompt
→ Change the name if necessary & press ‘Done’
→ If necessary, insert an SD card into the camera by removing the rubber seal on the bottom of the camera (max. 128Gb).
CONNECT WITH NETWORK CABLE
→ Connect power to camera
→ Camera now says: “wait for Wi-Fi config”
→ Let smartphone connect to own 2.4GHz. WiFi network
→ Choose in the app: ‘Add Device’ or ‘+’ and ‘Add Device’
→ The camera will appear at the top of the app
→ If not, choose ‘Camera & Lock’ & “Smart Camera (Wi-Fi)”
→ Top right set to ‘Cable’
→ Check and press ‘Next’
→ Wait for camera to say: ‘Connect router’
→ Change the name if necessary & press ‘Done’
→ If necessary, insert an SD card into the camera by removing the rubber seal on the bottom of the camera (max. 128Gb).
RESET
→ Remove rubber seal
→ Press the small reset button for 5 seconds
→ Camera says: ‘Reset, camera reboot’
→ Camera now says: “wait for Wi-Fi config”
SETTINGS
→ PLAYBACK – view images stored on SD card back in the app
→ GALLERY – view images stored on the smartphone
→ THEME COLOR – choose light or dark mode
→ PRIVATE MODE – turn off camera
→ NIGHT MODE – manually switch between night vision via infrared or white
light LEDs
→ MOTION TRACKING – let camera follow moving people (not perfect)
→ MOTION DETECTION – let the app give a push notification when motion is
detected
→ SOUND DETECTION – let the app give a push notification when sound is heard
→ PATROL – run camera continuously or on a full schedule or from site to site
→ SIREN – let the camera speaker sound a siren, volume & duration can be set
→ SMART – imagine a scenario
→ CLOUD – option: save images to the cloud
→ SITE – set favorite camera directions
→ DIRECTION – move camera manually
→ MESSAGES – view a log
→ HD / SD – switch between image quality
OTHER SETTINGS:
→ Recording settings – non-stop recordings or only movements, also based on a
schedule
→ Siren Adjustment – set siren duration & volume
→ Motion detection alarm settings – set sensitivity, human body filtering &
activity area/surveillance area
ADD TO SCREEN DS6669/DS7796
→ Go to the camera settings in the app by choosing 3 dots … at the top right
→ Choose ONVIF and enable ONVIF Switch
→ Enter password & choose Reset Password (password must start with a capital
letter and contain 1 number and multiple letters) + view IP address → On
screen open settings
→ Select: Add new devices
→ Let screen search in the network. Screen/internet module must therefore be
connected to the same internet router.
→ Next to IP address of camera press +
→ Enter: User: admin Password:
→ Choose LOGIN
TECHNICAL SPECIFICATIONS
→ Lens: 4MP, 3.6mm, 1/3” CMOS Color sensor
→ Viewing angle: 100° – 12xIR CUT LEDs 20m
→ Internet: 2.4 Ghz WiFi (802.11 b/g/n) or RJ45 network cable
→ Video compression : H.265
→ Audio compression : G.711
→ Power: DC12V/1A; Consumption: 12W
→ Casing: Plastic; IP65
→ Operating temperature : -10°C + 50°C
→ ONVIF supported
|
Customer Support
TUTORIALS: WWW.YOUTUBE.COM/DOORSAFE
Door safe Postbus 633645 ZK Vinkeveen The Netherlands
www.doorsafe.eu
Made in china
WWW.DOORSAFE.EU
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>